[RFC PATCH 5/7] drm/msm/dpu: Document and enable TEAR interrupts on DSI interfaces
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Sun Jan 1 13:12:35 UTC 2023
On 31/12/2022 23:50, Marijn Suijten wrote:
> All SoCs since DPU 5.0.0 (and seemingly up until and including 6.0.0,
> but excluding 7.x.x) have the tear interrupt and control registers moved
> out of the PINGPONG block and into the INTF block. Wire up the
> necessary interrupts and IRQ masks on all supported hardware.
>
> Signed-off-by: Marijn Suijten <marijn.suijten at somainline.org>
> ---
> .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 78 +++++++++++--------
> .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 6 +-
> .../gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c | 12 +++
> .../gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h | 2 +
> drivers/gpu/drm/msm/disp/dpu1/dpu_hwio.h | 3 +
> 5 files changed, 68 insertions(+), 33 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> index 1cfe94494135..b9b9b5b0b615 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> @@ -86,6 +86,15 @@
>
> #define INTF_SC7280_MASK INTF_SC7180_MASK | BIT(DPU_DATA_HCTL_EN)
>
> +#define IRQ_MSM8998_MASK (BIT(MDP_SSPP_TOP0_INTR) | \
> + BIT(MDP_SSPP_TOP0_INTR2) | \
> + BIT(MDP_SSPP_TOP0_HIST_INTR) | \
> + BIT(MDP_INTF0_INTR) | \
> + BIT(MDP_INTF1_INTR) | \
> + BIT(MDP_INTF2_INTR) | \
> + BIT(MDP_INTF3_INTR) | \
> + BIT(MDP_INTF4_INTR))
> +
> #define IRQ_SDM845_MASK (BIT(MDP_SSPP_TOP0_INTR) | \
> BIT(MDP_SSPP_TOP0_INTR2) | \
> BIT(MDP_SSPP_TOP0_HIST_INTR) | \
> @@ -100,13 +109,15 @@
> #define IRQ_QCM2290_MASK (BIT(MDP_SSPP_TOP0_INTR) | \
> BIT(MDP_SSPP_TOP0_INTR2) | \
> BIT(MDP_SSPP_TOP0_HIST_INTR) | \
> - BIT(MDP_INTF1_INTR))
> + BIT(MDP_INTF1_INTR) | \
> + BIT(MDP_INTF1_TEAR_INTR))
>
> #define IRQ_SC7180_MASK (BIT(MDP_SSPP_TOP0_INTR) | \
> BIT(MDP_SSPP_TOP0_INTR2) | \
> BIT(MDP_SSPP_TOP0_HIST_INTR) | \
> BIT(MDP_INTF0_INTR) | \
> - BIT(MDP_INTF1_INTR))
> + BIT(MDP_INTF1_INTR) | \
> + BIT(MDP_INTF1_TEAR_INTR))
>
> #define IRQ_SC7280_MASK (BIT(MDP_SSPP_TOP0_INTR) | \
> BIT(MDP_SSPP_TOP0_INTR2) | \
> @@ -120,7 +131,9 @@
> BIT(MDP_SSPP_TOP0_HIST_INTR) | \
> BIT(MDP_INTF0_INTR) | \
> BIT(MDP_INTF1_INTR) | \
> + BIT(MDP_INTF1_TEAR_INTR) | \
> BIT(MDP_INTF2_INTR) | \
> + BIT(MDP_INTF2_TEAR_INTR) | \
> BIT(MDP_INTF3_INTR) | \
> BIT(MDP_INTF4_INTR))
>
> @@ -129,7 +142,9 @@
> BIT(MDP_SSPP_TOP0_HIST_INTR) | \
> BIT(MDP_INTF0_INTR) | \
> BIT(MDP_INTF1_INTR) | \
> + BIT(MDP_INTF1_TEAR_INTR) | \
> BIT(MDP_INTF2_INTR) | \
> + BIT(MDP_INTF2_TEAR_INTR) | \
> BIT(MDP_INTF3_INTR) | \
> BIT(MDP_INTF4_INTR) | \
> BIT(MDP_INTF5_INTR) | \
> @@ -1300,63 +1315,64 @@ static struct dpu_dsc_cfg sdm845_dsc[] = {
> /*************************************************************
> * INTF sub blocks config
> *************************************************************/
> -#define INTF_BLK(_name, _id, _base, _type, _ctrl_id, _progfetch, _features, _reg, _underrun_bit, _vsync_bit) \
> +#define INTF_BLK(_name, _id, _base, _len, _type, _ctrl_id, _progfetch, _features, _reg, _underrun_bit, _vsync_bit, _tear_reg, _tear_rd_ptr_bit) \
> {\
> .name = _name, .id = _id, \
> - .base = _base, .len = 0x280, \
> + .base = _base, .len = _len, \
Please move .len setting to a separate patch, it is not direclty related
to tear interrupt addition.
> .features = _features, \
> .type = _type, \
> .controller_id = _ctrl_id, \
> .prog_fetch_lines_worst_case = _progfetch, \
> .intr_underrun = DPU_IRQ_IDX(_reg, _underrun_bit), \
> .intr_vsync = DPU_IRQ_IDX(_reg, _vsync_bit), \
> + .intr_tear_rd_ptr = DPU_IRQ_IDX(_tear_reg, _tear_rd_ptr_bit), \
Initially I added separate _reg and _bit settings because reg was common
to both interrupts. However now as tear interrups use different reg it
might be better to first move DPU_IRQ_IDX out of this macro () and then
to add your tear_rd_ptr_intr as a single intr_idx.
> }
>
> static const struct dpu_intf_cfg msm8998_intf[] = {
> - INTF_BLK("intf_0", INTF_0, 0x6A000, INTF_DP, 0, 25, INTF_SDM845_MASK, MDP_SSPP_TOP0_INTR, 24, 25),
> - INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0, 25, INTF_SDM845_MASK, MDP_SSPP_TOP0_INTR, 26, 27),
> - INTF_BLK("intf_2", INTF_2, 0x6B000, INTF_DSI, 1, 25, INTF_SDM845_MASK, MDP_SSPP_TOP0_INTR, 28, 29),
> - INTF_BLK("intf_3", INTF_3, 0x6B800, INTF_HDMI, 0, 25, INTF_SDM845_MASK, MDP_SSPP_TOP0_INTR, 30, 31),
> + INTF_BLK("intf_0", INTF_0, 0x6A000, 0x268, INTF_DP, 0, 25, INTF_SDM845_MASK, MDP_SSPP_TOP0_INTR, 24, 25, -1, -1),
> + INTF_BLK("intf_1", INTF_1, 0x6A800, 0x268, INTF_DSI, 0, 25, INTF_SDM845_MASK, MDP_SSPP_TOP0_INTR, 26, 27, -1, -1),
> + INTF_BLK("intf_2", INTF_2, 0x6B000, 0x268, INTF_DSI, 1, 25, INTF_SDM845_MASK, MDP_SSPP_TOP0_INTR, 28, 29, -1, -1),
> + INTF_BLK("intf_3", INTF_3, 0x6B800, 0x268, INTF_HDMI, 0, 25, INTF_SDM845_MASK, MDP_SSPP_TOP0_INTR, 30, 31, -1, -1),
> };
>
> static const struct dpu_intf_cfg sdm845_intf[] = {
> - INTF_BLK("intf_0", INTF_0, 0x6A000, INTF_DP, 0, 24, INTF_SDM845_MASK, MDP_SSPP_TOP0_INTR, 24, 25),
> - INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0, 24, INTF_SDM845_MASK, MDP_SSPP_TOP0_INTR, 26, 27),
> - INTF_BLK("intf_2", INTF_2, 0x6B000, INTF_DSI, 1, 24, INTF_SDM845_MASK, MDP_SSPP_TOP0_INTR, 28, 29),
> - INTF_BLK("intf_3", INTF_3, 0x6B800, INTF_DP, 1, 24, INTF_SDM845_MASK, MDP_SSPP_TOP0_INTR, 30, 31),
> + INTF_BLK("intf_0", INTF_0, 0x6A000, 0x280, INTF_DP, 0, 24, INTF_SDM845_MASK, MDP_SSPP_TOP0_INTR, 24, 25, -1, -1),
> + INTF_BLK("intf_1", INTF_1, 0x6A800, 0x280, INTF_DSI, 0, 24, INTF_SDM845_MASK, MDP_SSPP_TOP0_INTR, 26, 27, -1, -1),
> + INTF_BLK("intf_2", INTF_2, 0x6B000, 0x280, INTF_DSI, 1, 24, INTF_SDM845_MASK, MDP_SSPP_TOP0_INTR, 28, 29, -1, -1),
> + INTF_BLK("intf_3", INTF_3, 0x6B800, 0x280, INTF_DP, 1, 24, INTF_SDM845_MASK, MDP_SSPP_TOP0_INTR, 30, 31, -1, -1),
> };
>
> static const struct dpu_intf_cfg sc7180_intf[] = {
> - INTF_BLK("intf_0", INTF_0, 0x6A000, INTF_DP, MSM_DP_CONTROLLER_0, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 24, 25),
> - INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 26, 27),
> + INTF_BLK("intf_0", INTF_0, 0x6A000, 0x280, INTF_DP, MSM_DP_CONTROLLER_0, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 24, 25, -1, -1),
> + INTF_BLK("intf_1", INTF_1, 0x6A800, 0x2b8, INTF_DSI, 0, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 26, 27, MDP_INTF1_TEAR_INTR, 2),
> };
>
> static const struct dpu_intf_cfg sm8150_intf[] = {
> - INTF_BLK("intf_0", INTF_0, 0x6A000, INTF_DP, 0, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 24, 25),
> - INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 26, 27),
> - INTF_BLK("intf_2", INTF_2, 0x6B000, INTF_DSI, 1, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 28, 29),
> - INTF_BLK("intf_3", INTF_3, 0x6B800, INTF_DP, 1, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 30, 31),
> + INTF_BLK("intf_0", INTF_0, 0x6A000, 0x280, INTF_DP, 0, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 24, 25, -1, -1),
> + INTF_BLK("intf_1", INTF_1, 0x6A800, 0x2b8, INTF_DSI, 0, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 26, 27, MDP_INTF1_TEAR_INTR, 2),
> + INTF_BLK("intf_2", INTF_2, 0x6B000, 0x2b8, INTF_DSI, 1, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 28, 29, MDP_INTF2_TEAR_INTR, 2),
> + INTF_BLK("intf_3", INTF_3, 0x6B800, 0x280, INTF_DP, 1, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 30, 31, -1, -1),
> };
>
> static const struct dpu_intf_cfg sc7280_intf[] = {
> - INTF_BLK("intf_0", INTF_0, 0x34000, INTF_DP, MSM_DP_CONTROLLER_0, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 24, 25),
> - INTF_BLK("intf_1", INTF_1, 0x35000, INTF_DSI, 0, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 26, 27),
> - INTF_BLK("intf_5", INTF_5, 0x39000, INTF_DP, MSM_DP_CONTROLLER_1, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 22, 23),
> + INTF_BLK("intf_0", INTF_0, 0x34000, 0x280, INTF_DP, MSM_DP_CONTROLLER_0, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 24, 25, -1, -1),
> + INTF_BLK("intf_1", INTF_1, 0x35000, 0x2b8, INTF_DSI, 0, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 26, 27, MDP_INTF1_TEAR_INTR, 2),
> + INTF_BLK("intf_5", INTF_5, 0x39000, 0x280, INTF_DP, MSM_DP_CONTROLLER_1, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 22, 23, -1, -1),
> };
>
> static const struct dpu_intf_cfg sc8180x_intf[] = {
> - INTF_BLK("intf_0", INTF_0, 0x6A000, INTF_DP, MSM_DP_CONTROLLER_0, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 24, 25),
> - INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 26, 27),
> - INTF_BLK("intf_2", INTF_2, 0x6B000, INTF_DSI, 1, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 28, 29),
> + INTF_BLK("intf_0", INTF_0, 0x6A000, 0x280, INTF_DP, MSM_DP_CONTROLLER_0, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 24, 25, -1, -1),
> + INTF_BLK("intf_1", INTF_1, 0x6A800, 0x2b8, INTF_DSI, 0, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 26, 27, MDP_INTF1_TEAR_INTR, 2),
> + INTF_BLK("intf_2", INTF_2, 0x6B000, 0x2b8, INTF_DSI, 1, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 28, 29, MDP_INTF2_TEAR_INTR, 2),
> /* INTF_3 is for MST, wired to INTF_DP 0 and 1, use dummy index until this is supported */
> - INTF_BLK("intf_3", INTF_3, 0x6B800, INTF_DP, 999, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 30, 31),
> - INTF_BLK("intf_4", INTF_4, 0x6C000, INTF_DP, MSM_DP_CONTROLLER_1, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 20, 21),
> - INTF_BLK("intf_5", INTF_5, 0x6C800, INTF_DP, MSM_DP_CONTROLLER_2, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 22, 23),
> + INTF_BLK("intf_3", INTF_3, 0x6B800, 0x280, INTF_DP, 999, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 30, 31, -1, -1),
> + INTF_BLK("intf_4", INTF_4, 0x6C000, 0x280, INTF_DP, MSM_DP_CONTROLLER_1, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 20, 21, -1, -1),
> + INTF_BLK("intf_5", INTF_5, 0x6C800, 0x280, INTF_DP, MSM_DP_CONTROLLER_2, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 22, 23, -1, -1),
> };
>
> static const struct dpu_intf_cfg qcm2290_intf[] = {
> - INTF_BLK("intf_0", INTF_0, 0x00000, INTF_NONE, 0, 0, 0, 0, 0, 0),
> - INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 26, 27),
> + INTF_BLK("intf_0", INTF_0, 0x00000, 0x2b8, INTF_NONE, 0, 0, 0, 0, 0, 0, -1, -1),
> + INTF_BLK("intf_1", INTF_1, 0x6A800, 0x2b8, INTF_DSI, 0, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 26, 27, MDP_INTF2_TEAR_INTR, 2),
> };
>
> /*************************************************************
> @@ -1849,7 +1865,7 @@ static const struct dpu_mdss_cfg msm8998_dpu_cfg = {
> .vbif = msm8998_vbif,
> .reg_dma_count = 0,
> .perf = &msm8998_perf_data,
> - .mdss_irqs = IRQ_SM8250_MASK,
> + .mdss_irqs = IRQ_MSM8998_MASK,
> };
>
> static const struct dpu_mdss_cfg sdm845_dpu_cfg = {
> @@ -1947,7 +1963,7 @@ static const struct dpu_mdss_cfg sm8150_dpu_cfg = {
> .reg_dma_count = 1,
> .dma_cfg = &sm8150_regdma,
> .perf = &sm8150_perf_data,
> - .mdss_irqs = IRQ_SDM845_MASK,
> + .mdss_irqs = IRQ_SM8250_MASK,
> };
>
> static const struct dpu_mdss_cfg sc8180x_dpu_cfg = {
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> index e0e153889ab7..2ea17e4ef3e5 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> @@ -638,8 +638,9 @@ struct dpu_dsc_cfg {
> * @type: Interface type(DSI, DP, HDMI)
> * @controller_id: Controller Instance ID in case of multiple of intf type
> * @prog_fetch_lines_worst_case Worst case latency num lines needed to prefetch
> - * @intr_underrun: index for INTF underrun interrupt
> - * @intr_vsync: index for INTF VSYNC interrupt
> + * @intr_underrun: index for INTF underrun interrupt
> + * @intr_vsync: index for INTF VSYNC interrupt
> + * @intr_tear_rd_ptr: index for INTF TEAR_RD_PTR interrupt
> */
> struct dpu_intf_cfg {
> DPU_HW_BLK_INFO;
> @@ -648,6 +649,7 @@ struct dpu_intf_cfg {
> u32 prog_fetch_lines_worst_case;
> s32 intr_underrun;
> s32 intr_vsync;
> + s32 intr_tear_rd_ptr;
> };
>
> /**
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
> index cf1b6d84c18a..044136a97fac 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
> @@ -24,6 +24,8 @@
> #define MDP_INTF_3_OFF 0x6B800
> #define MDP_INTF_4_OFF 0x6C000
> #define MDP_INTF_5_OFF 0x6C800
> +#define MDP_INTF_1_TEAR_OFF 0x6D800
> +#define MDP_INTF_2_TEAR_OFF 0x6D900
> #define MDP_AD4_0_OFF 0x7C000
> #define MDP_AD4_1_OFF 0x7D000
> #define MDP_AD4_INTR_EN_OFF 0x41c
> @@ -99,6 +101,16 @@ static const struct dpu_intr_reg dpu_intr_set[] = {
> MDP_INTF_5_OFF+INTF_INTR_EN,
> MDP_INTF_5_OFF+INTF_INTR_STATUS
> },
> + [MDP_INTF1_TEAR_INTR] = {
> + MDP_INTF_1_TEAR_OFF+INTF_INTR_TEAR_CLEAR,
> + MDP_INTF_1_TEAR_OFF+INTF_INTR_TEAR_EN,
> + MDP_INTF_1_TEAR_OFF+INTF_INTR_TEAR_STATUS
> + },
> + [MDP_INTF2_TEAR_INTR] = {
> + MDP_INTF_2_TEAR_OFF+INTF_INTR_TEAR_CLEAR,
> + MDP_INTF_2_TEAR_OFF+INTF_INTR_TEAR_EN,
> + MDP_INTF_2_TEAR_OFF+INTF_INTR_TEAR_STATUS
> + },
> [MDP_AD4_0_INTR] = {
> MDP_AD4_0_OFF + MDP_AD4_INTR_CLEAR_OFF,
> MDP_AD4_0_OFF + MDP_AD4_INTR_EN_OFF,
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h
> index 46443955443c..b447e4a1d9f4 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h
> @@ -23,6 +23,8 @@ enum dpu_hw_intr_reg {
> MDP_INTF3_INTR,
> MDP_INTF4_INTR,
> MDP_INTF5_INTR,
> + MDP_INTF1_TEAR_INTR,
> + MDP_INTF2_TEAR_INTR,
> MDP_AD4_0_INTR,
> MDP_AD4_1_INTR,
> MDP_INTF0_7xxx_INTR,
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hwio.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hwio.h
> index c8156ed4b7fb..6bdac515fd54 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hwio.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hwio.h
> @@ -10,6 +10,9 @@
> /**
> * MDP TOP block Register and bit fields and defines
> */
> +#define INTF_INTR_TEAR_EN 0x000
> +#define INTF_INTR_TEAR_STATUS 0x004
> +#define INTF_INTR_TEAR_CLEAR 0x008
> #define DISP_INTF_SEL 0x004
> #define INTR_EN 0x010
> #define INTR_STATUS 0x014
--
With best wishes
Dmitry
More information about the dri-devel
mailing list