[PATCH] drm/gem: Check for valid formats

Thomas Zimmermann tzimmermann at suse.de
Tue Jan 3 13:16:30 UTC 2023


Hi,

thanks for the follow-up patch.

Am 03.01.23 um 13:53 schrieb Maíra Canal:
> Currently, drm_gem_fb_create() doesn't check if the pixel format is
> supported, which can lead to the acceptance of invalid pixel formats
> e.g. the acceptance of invalid modifiers. Therefore, add a check for
> valid formats on drm_gem_fb_create().
> 
> Moreover, note that this check is only valid for atomic drivers,
> because, for non-atomic drivers, checking drm_any_plane_has_format() is
> not possible since the format list for the primary plane is fake, and
> we'd therefor reject valid formats.
> 
> Suggested-by: Thomas Zimmermann <tzimmermann at suse.de>
> Signed-off-by: Maíra Canal <mcanal at igalia.com>
> ---
>   Documentation/gpu/todo.rst                   | 7 ++-----
>   drivers/gpu/drm/drm_gem_framebuffer_helper.c | 9 +++++++++
>   2 files changed, 11 insertions(+), 5 deletions(-)
> 
> diff --git a/Documentation/gpu/todo.rst b/Documentation/gpu/todo.rst
> index 1f8a5ebe188e..68bdafa0284f 100644
> --- a/Documentation/gpu/todo.rst
> +++ b/Documentation/gpu/todo.rst
> @@ -276,11 +276,8 @@ Various hold-ups:
>   - Need to switch to drm_fbdev_generic_setup(), otherwise a lot of the custom fb
>     setup code can't be deleted.
>   
> -- Many drivers wrap drm_gem_fb_create() only to check for valid formats. For
> -  atomic drivers we could check for valid formats by calling
> -  drm_plane_check_pixel_format() against all planes, and pass if any plane
> -  supports the format. For non-atomic that's not possible since like the format
> -  list for the primary plane is fake and we'd therefor reject valid formats.
> +- Need to switch to drm_gem_fb_create(), as now drm_gem_fb_create() checks for
> +  valid formats for atomic drivers.
>   
>   - Many drivers subclass drm_framebuffer, we'd need a embedding compatible
>     version of the varios drm_gem_fb_create functions. Maybe called
> diff --git a/drivers/gpu/drm/drm_gem_framebuffer_helper.c b/drivers/gpu/drm/drm_gem_framebuffer_helper.c
> index e93533b86037..b8a615a138cd 100644
> --- a/drivers/gpu/drm/drm_gem_framebuffer_helper.c
> +++ b/drivers/gpu/drm/drm_gem_framebuffer_helper.c
> @@ -9,6 +9,7 @@
>   #include <linux/module.h>
>   
>   #include <drm/drm_damage_helper.h>
> +#include <drm/drm_drv.h>
>   #include <drm/drm_fourcc.h>
>   #include <drm/drm_framebuffer.h>
>   #include <drm/drm_gem.h>
> @@ -164,6 +165,14 @@ int drm_gem_fb_init_with_funcs(struct drm_device *dev,
>   		return -EINVAL;
>   	}
>   
> +	if (drm_drv_uses_atomic_modeset(dev) &&
> +	    !drm_any_plane_has_format(dev, mode_cmd->pixel_format,
> +				      mode_cmd->modifier[0])) {

Because this is a generic helper, it has to handle the odd cases as 
well. Here we cannot assume modifier[0], because there's a modifier for 
each pixel plane in multi-plane formats. (That's a different type of 
plane than the struct plane we're passing in.) If one combination isn't 
supported, the helper should fail.

We get the number of pixel planes from the format info. So the correct 
implementation is something like that

if (drm_drv_uses_atomic_modeset())) {
	for (i = 0; i < info->num_planes; ++i) {
         	if (!drm_any_plane_has_format(dev, pixel_format, \
				modifier[i]) {
			drm_dbg_kms(dev, "error msg");
			return -EINVAL;
		}
         }
}


> +		drm_dbg(dev, "Unsupported pixel format %p4cc / modifier 0x%llx\n",

drm_dbg() is for drivers. Use drm_dbg_kms() please.

Best regards
Thomas


> +			&mode_cmd->pixel_format, mode_cmd->modifier[0]);
> +		return -EINVAL;
> +	}
> +
>   	for (i = 0; i < info->num_planes; i++) {
>   		unsigned int width = mode_cmd->width / (i ? info->hsub : 1);
>   		unsigned int height = mode_cmd->height / (i ? info->vsub : 1);

-- 
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Maxfeldstr. 5, 90409 Nürnberg, Germany
(HRB 36809, AG Nürnberg)
Geschäftsführer: Ivo Totev
-------------- next part --------------
A non-text attachment was scrubbed...
Name: OpenPGP_signature
Type: application/pgp-signature
Size: 840 bytes
Desc: OpenPGP digital signature
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20230103/7137e66d/attachment-0001.sig>


More information about the dri-devel mailing list