[RFC PATCH v3 3/3] drm/msm/dpu: Use color_fill property for DPU planes
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Thu Jan 5 02:16:56 UTC 2023
On 05/01/2023 01:40, Jessica Zhang wrote:
> Initialize and use the color_fill properties for planes in DPU driver. In
> addition, relax framebuffer requirements within atomic commit path and
> add checks for NULL framebuffers. Finally, drop DPU_PLANE_COLOR_FILL_FLAG
> as it's unused.
>
> Changes since V2:
> - Fixed dropped 'const' warning
> - Dropped use of solid_fill_format
> - Switched to using drm_plane_solid_fill_enabled helper method
> - Added helper to convert color fill to BGR888 (Rob)
> - Added support for solid fill on planes of varying sizes
> - Removed DPU_PLANE_COLOR_FILL_FLAG
>
> Signed-off-by: Jessica Zhang <quic_jesszhan at quicinc.com>
> ---
> drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c | 9 +++-
> drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 65 ++++++++++++++---------
> 2 files changed, 49 insertions(+), 25 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> index 13ce321283ff..0695b70ea1b7 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> @@ -409,6 +409,7 @@ static void _dpu_crtc_blend_setup_mixer(struct drm_crtc *crtc,
> struct drm_plane_state *state;
> struct dpu_crtc_state *cstate = to_dpu_crtc_state(crtc->state);
> struct dpu_plane_state *pstate = NULL;
> + const struct msm_format *fmt;
> struct dpu_format *format;
> struct dpu_hw_ctl *ctl = mixer->lm_ctl;
>
> @@ -441,7 +442,13 @@ static void _dpu_crtc_blend_setup_mixer(struct drm_crtc *crtc,
> sspp_idx - SSPP_VIG0,
> state->fb ? state->fb->base.id : -1);
>
> - format = to_dpu_format(msm_framebuffer_format(pstate->base.fb));
> + if (pstate->base.fb)
> + fmt = msm_framebuffer_format(pstate->base.fb);
> + else
> + fmt = dpu_get_msm_format(&_dpu_crtc_get_kms(crtc)->base,
> + DRM_FORMAT_ABGR8888, 0);
> +
> + format = to_dpu_format(fmt);
>
> if (pstate->stage == DPU_STAGE_BASE && format->alpha_enable)
> bg_alpha_enable = true;
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
> index 86719020afe2..51a7507373f7 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
> @@ -44,7 +44,6 @@
>
> #define DPU_NAME_SIZE 12
>
> -#define DPU_PLANE_COLOR_FILL_FLAG BIT(31)
> #define DPU_ZPOS_MAX 255
>
> /* multirect rect index */
> @@ -105,7 +104,6 @@ struct dpu_plane {
> enum dpu_sspp pipe;
>
> struct dpu_hw_pipe *pipe_hw;
> - uint32_t color_fill;
> bool is_error;
> bool is_rt_pipe;
> const struct dpu_mdss_cfg *catalog;
> @@ -678,6 +676,17 @@ static void _dpu_plane_setup_scaler(struct dpu_plane *pdpu,
> &scaler3_cfg);
> }
>
> +static uint32_t _dpu_plane_get_fill_color(struct drm_solid_fill solid_fill)
> +{
> + uint32_t ret = 0;
> +
> + ret |= ((uint8_t) solid_fill.b) << 16;
> + ret |= ((uint8_t) solid_fill.g) << 8;
> + ret |= ((uint8_t) solid_fill.r);
> +
> + return ret;
> +}
> +
> /**
> * _dpu_plane_color_fill - enables color fill on plane
> * @pdpu: Pointer to DPU plane object
> @@ -1001,12 +1010,17 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
>
> dst = drm_plane_state_dest(new_plane_state);
>
> - fb_rect.x2 = new_plane_state->fb->width;
> - fb_rect.y2 = new_plane_state->fb->height;
> + if (new_plane_state->fb) {
> + fb_rect.x2 = new_plane_state->fb->width;
> + fb_rect.y2 = new_plane_state->fb->height;
> + }
>
> max_linewidth = pdpu->catalog->caps->max_linewidth;
>
> - fmt = to_dpu_format(msm_framebuffer_format(new_plane_state->fb));
> + if (new_plane_state->fb)
> + fmt = to_dpu_format(msm_framebuffer_format(new_plane_state->fb));
> + else
> + fmt = dpu_get_dpu_format(DRM_FORMAT_ABGR8888);
I think this should be more explicit:
if (solid_fill)
fmt = dpu_get_dpu_format(...)
else
fmt = to_dpu_format(msm_framebuffer_format(...).
And in the _dpu_crtc_blend_setup_mixer() too.
Maybe the code can be extracted to a helper.
>
> min_src_size = DPU_FORMAT_IS_YUV(fmt) ? 2 : 1;
>
> @@ -1018,7 +1032,7 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
> return -EINVAL;
>
> /* check src bounds */
> - } else if (!dpu_plane_validate_src(&src, &fb_rect, min_src_size)) {
> + } else if (new_plane_state->fb && !dpu_plane_validate_src(&src, &fb_rect, min_src_size)) {
> DPU_DEBUG_PLANE(pdpu, "invalid source " DRM_RECT_FMT "\n",
> DRM_RECT_ARG(&src));
> return -E2BIG;
> @@ -1086,9 +1100,10 @@ void dpu_plane_flush(struct drm_plane *plane)
> if (pdpu->is_error)
> /* force white frame with 100% alpha pipe output on error */
> _dpu_plane_color_fill(pdpu, 0xFFFFFF, 0xFF);
> - else if (pdpu->color_fill & DPU_PLANE_COLOR_FILL_FLAG)
> + else if (!(plane->state->fb) && drm_plane_solid_fill_enabled(plane->state))
> /* force 100% alpha */
> - _dpu_plane_color_fill(pdpu, pdpu->color_fill, 0xFF);
> + _dpu_plane_color_fill(pdpu, _dpu_plane_get_fill_color(plane->state->solid_fill),
> + 0xFF);
I'd push alpha into _dpu_plane_get_fill_color(). Then adding alpha
support would be more transparent.
> else if (pdpu->pipe_hw && pdpu->pipe_hw->ops.setup_csc) {
> const struct dpu_format *fmt = to_dpu_format(msm_framebuffer_format(plane->state->fb));
> const struct dpu_csc_cfg *csc_ptr = _dpu_plane_get_csc(pdpu, fmt);
> @@ -1127,23 +1142,30 @@ static void dpu_plane_sspp_atomic_update(struct drm_plane *plane)
> struct drm_crtc *crtc = state->crtc;
> struct drm_framebuffer *fb = state->fb;
> bool is_rt_pipe, update_qos_remap;
> - const struct dpu_format *fmt =
> - to_dpu_format(msm_framebuffer_format(fb));
> + const struct dpu_format *fmt;
> struct dpu_hw_pipe_cfg pipe_cfg;
>
> - memset(&pipe_cfg, 0, sizeof(struct dpu_hw_pipe_cfg));
> -
> - _dpu_plane_set_scanout(plane, pstate, &pipe_cfg, fb);
> -
> pstate->pending = true;
>
> is_rt_pipe = (dpu_crtc_get_client_type(crtc) != NRT_CLIENT);
> _dpu_plane_set_qos_ctrl(plane, false, DPU_PLANE_QOS_PANIC_CTRL);
>
> - DPU_DEBUG_PLANE(pdpu, "FB[%u] " DRM_RECT_FP_FMT "->crtc%u " DRM_RECT_FMT
> - ", %4.4s ubwc %d\n", fb->base.id, DRM_RECT_FP_ARG(&state->src),
> - crtc->base.id, DRM_RECT_ARG(&state->dst),
> - (char *)&fmt->base.pixel_format, DPU_FORMAT_IS_UBWC(fmt));
> + /* override for color fill */
> + if (!fb && drm_plane_solid_fill_enabled(plane->state)) {
> + /* skip remaining processing on color fill */
> + return;
> + }
> +
> + memset(&pipe_cfg, 0, sizeof(struct dpu_hw_pipe_cfg));
> +
> + fmt = to_dpu_format(msm_framebuffer_format(fb));
> + _dpu_plane_set_scanout(plane, pstate, &pipe_cfg, fb);
This change deserves a comment somewhere (in the commit message?).
Beforehand the driver tried to set the scanout/layout for the COLOR_FILL
case. You have changed this.
> +
> + if (fb)
> + DPU_DEBUG_PLANE(pdpu, "FB[%u] " DRM_RECT_FP_FMT "->crtc%u " DRM_RECT_FMT
> + ", %4.4s ubwc %d\n", fb->base.id, DRM_RECT_FP_ARG(&state->src),
> + crtc->base.id, DRM_RECT_ARG(&state->dst),
> + (char *)&fmt->base.pixel_format, DPU_FORMAT_IS_UBWC(fmt));
>
> pipe_cfg.src_rect = state->src;
>
> @@ -1155,12 +1177,6 @@ static void dpu_plane_sspp_atomic_update(struct drm_plane *plane)
>
> pipe_cfg.dst_rect = state->dst;
>
> - /* override for color fill */
> - if (pdpu->color_fill & DPU_PLANE_COLOR_FILL_FLAG) {
> - /* skip remaining processing on color fill */
> - return;
> - }
> -
> if (pdpu->pipe_hw->ops.setup_rects) {
> pdpu->pipe_hw->ops.setup_rects(pdpu->pipe_hw,
> &pipe_cfg,
> @@ -1511,6 +1527,7 @@ struct drm_plane *dpu_plane_init(struct drm_device *dev,
> DPU_ERROR("failed to install zpos property, rc = %d\n", ret);
>
> drm_plane_create_alpha_property(plane);
> + drm_plane_create_solid_fill_property(plane);
> drm_plane_create_blend_mode_property(plane,
> BIT(DRM_MODE_BLEND_PIXEL_NONE) |
> BIT(DRM_MODE_BLEND_PREMULTI) |
--
With best wishes
Dmitry
More information about the dri-devel
mailing list