[RFC PATCH v2 3/3] drm/msm/dpu: Use color_fill property for DPU planes
Sebastian Wick
sebastian.wick at redhat.com
Thu Jan 5 14:49:17 UTC 2023
On Wed, Jan 4, 2023 at 2:10 AM Jessica Zhang <quic_jesszhan at quicinc.com> wrote:
>
>
>
> On 12/22/2022 7:12 PM, Dmitry Baryshkov wrote:
> > On 23/12/2022 00:14, Jessica Zhang wrote:
> >> Initialize and use the color_fill properties for planes in DPU driver. In
> >> addition, relax framebuffer requirements within atomic commit path and
> >> add checks for NULL framebuffers. Finally, drop DPU_PLANE_COLOR_FILL_FLAG
> >> as it's unused.
> >>
> >> Changes since V2:
> >> - Fixed dropped 'const' warning
> >> - Dropped use of solid_fill_format
> >> - Switched to using drm_plane_solid_fill_enabled helper method
> >> - Added helper to convert color fill to BGR888 (Rob)
> >> - Added support for solid fill on planes of varying sizes
> >> - Removed DPU_PLANE_COLOR_FILL_FLAG
> >>
> >> Signed-off-by: Jessica Zhang <quic_jesszhan at quicinc.com>
> >> ---
> >> drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c | 9 +++-
> >> drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 65 ++++++++++++++---------
> >> 2 files changed, 49 insertions(+), 25 deletions(-)
> >>
> >> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> >> b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> >> index 13ce321283ff..0695b70ea1b7 100644
> >> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> >> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> >> @@ -409,6 +409,7 @@ static void _dpu_crtc_blend_setup_mixer(struct
> >> drm_crtc *crtc,
> >> struct drm_plane_state *state;
> >> struct dpu_crtc_state *cstate = to_dpu_crtc_state(crtc->state);
> >> struct dpu_plane_state *pstate = NULL;
> >> + const struct msm_format *fmt;
> >> struct dpu_format *format;
> >> struct dpu_hw_ctl *ctl = mixer->lm_ctl;
> >> @@ -441,7 +442,13 @@ static void _dpu_crtc_blend_setup_mixer(struct
> >> drm_crtc *crtc,
> >> sspp_idx - SSPP_VIG0,
> >> state->fb ? state->fb->base.id : -1);
> >> - format = to_dpu_format(msm_framebuffer_format(pstate->base.fb));
> >> + if (pstate->base.fb)
> >> + fmt = msm_framebuffer_format(pstate->base.fb);
> >> + else
> >> + fmt = dpu_get_msm_format(&_dpu_crtc_get_kms(crtc)->base,
> >> + DRM_FORMAT_ABGR8888, 0);
> >> +
> >> + format = to_dpu_format(fmt);
> >> if (pstate->stage == DPU_STAGE_BASE && format->alpha_enable)
> >> bg_alpha_enable = true;
> >> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
> >> b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
> >> index 86719020afe2..51a7507373f7 100644
> >> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
> >> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
> >> @@ -44,7 +44,6 @@
> >> #define DPU_NAME_SIZE 12
> >> -#define DPU_PLANE_COLOR_FILL_FLAG BIT(31)
> >> #define DPU_ZPOS_MAX 255
> >> /* multirect rect index */
> >> @@ -105,7 +104,6 @@ struct dpu_plane {
> >> enum dpu_sspp pipe;
> >> struct dpu_hw_pipe *pipe_hw;
> >> - uint32_t color_fill;
> >> bool is_error;
> >> bool is_rt_pipe;
> >> const struct dpu_mdss_cfg *catalog;
> >> @@ -678,6 +676,17 @@ static void _dpu_plane_setup_scaler(struct
> >> dpu_plane *pdpu,
> >> &scaler3_cfg);
> >> }
> >> +static uint32_t _dpu_plane_get_fill_color(struct drm_solid_fill
> >> solid_fill)
> >> +{
> >> + uint32_t ret = 0;
> >> +
> >> + ret |= ((uint8_t) solid_fill.b) << 16;
> >> + ret |= ((uint8_t) solid_fill.g) << 8;
> >> + ret |= ((uint8_t) solid_fill.r);
> >> +
> >> + return ret;
> >> +}
> >> +
> >> /**
> >> * _dpu_plane_color_fill - enables color fill on plane
> >> * @pdpu: Pointer to DPU plane object
> >> @@ -1001,12 +1010,17 @@ static int dpu_plane_atomic_check(struct
> >> drm_plane *plane,
> >> dst = drm_plane_state_dest(new_plane_state);
> >> - fb_rect.x2 = new_plane_state->fb->width;
> >> - fb_rect.y2 = new_plane_state->fb->height;
> >> + if (new_plane_state->fb) {
> >> + fb_rect.x2 = new_plane_state->fb->width;
> >> + fb_rect.y2 = new_plane_state->fb->height;
> >> + }
> >> max_linewidth = pdpu->catalog->caps->max_linewidth;
> >> - fmt = to_dpu_format(msm_framebuffer_format(new_plane_state->fb));
> >> + if (new_plane_state->fb)
> >> + fmt =
> >> to_dpu_format(msm_framebuffer_format(new_plane_state->fb));
> >> + else
> >> + fmt = dpu_get_dpu_format(DRM_FORMAT_ABGR8888);
> >> min_src_size = DPU_FORMAT_IS_YUV(fmt) ? 2 : 1;
> >> @@ -1018,7 +1032,7 @@ static int dpu_plane_atomic_check(struct
> >> drm_plane *plane,
> >> return -EINVAL;
> >> /* check src bounds */
> >> - } else if (!dpu_plane_validate_src(&src, &fb_rect, min_src_size)) {
> >> + } else if (new_plane_state->fb && !dpu_plane_validate_src(&src,
> >> &fb_rect, min_src_size)) {
> >> DPU_DEBUG_PLANE(pdpu, "invalid source " DRM_RECT_FMT "\n",
> >> DRM_RECT_ARG(&src));
> >> return -E2BIG;
> >> @@ -1086,9 +1100,10 @@ void dpu_plane_flush(struct drm_plane *plane)
> >> if (pdpu->is_error)
> >> /* force white frame with 100% alpha pipe output on error */
> >> _dpu_plane_color_fill(pdpu, 0xFFFFFF, 0xFF);
> >> - else if (pdpu->color_fill & DPU_PLANE_COLOR_FILL_FLAG)
> >> + else if (!(plane->state->fb) &&
> >> drm_plane_solid_fill_enabled(plane->state))
> >
> > And what if the plane has both fb and solid_fill proprety?
>
> Hi Dmitry,
>
> If both the FB and solid_fill are set, then the driver should prioritize
> the FB over the solid_fill.
Please add this to the documentation of the property as well.
>
> Thanks,
>
> Jessica Zhang
>
> >
> >> /* force 100% alpha */
> >> - _dpu_plane_color_fill(pdpu, pdpu->color_fill, 0xFF);
> >> + _dpu_plane_color_fill(pdpu,
> >> _dpu_plane_get_fill_color(plane->state->solid_fill),
> >> + 0xFF);
> >> else if (pdpu->pipe_hw && pdpu->pipe_hw->ops.setup_csc) {
> >> const struct dpu_format *fmt =
> >> to_dpu_format(msm_framebuffer_format(plane->state->fb));
> >> const struct dpu_csc_cfg *csc_ptr = _dpu_plane_get_csc(pdpu,
> >> fmt);
> >> @@ -1127,23 +1142,30 @@ static void
> >> dpu_plane_sspp_atomic_update(struct drm_plane *plane)
> >> struct drm_crtc *crtc = state->crtc;
> >> struct drm_framebuffer *fb = state->fb;
> >> bool is_rt_pipe, update_qos_remap;
> >> - const struct dpu_format *fmt =
> >> - to_dpu_format(msm_framebuffer_format(fb));
> >> + const struct dpu_format *fmt;
> >> struct dpu_hw_pipe_cfg pipe_cfg;
> >> - memset(&pipe_cfg, 0, sizeof(struct dpu_hw_pipe_cfg));
> >> -
> >> - _dpu_plane_set_scanout(plane, pstate, &pipe_cfg, fb);
> >> -
> >> pstate->pending = true;
> >> is_rt_pipe = (dpu_crtc_get_client_type(crtc) != NRT_CLIENT);
> >> _dpu_plane_set_qos_ctrl(plane, false, DPU_PLANE_QOS_PANIC_CTRL);
> >> - DPU_DEBUG_PLANE(pdpu, "FB[%u] " DRM_RECT_FP_FMT "->crtc%u "
> >> DRM_RECT_FMT
> >> - ", %4.4s ubwc %d\n", fb->base.id,
> >> DRM_RECT_FP_ARG(&state->src),
> >> - crtc->base.id, DRM_RECT_ARG(&state->dst),
> >> - (char *)&fmt->base.pixel_format, DPU_FORMAT_IS_UBWC(fmt));
> >> + /* override for color fill */
> >> + if (!fb && drm_plane_solid_fill_enabled(plane->state)) {
> >
> > And here too.
> >
> >> + /* skip remaining processing on color fill */
> >> + return;
> >> + }
> >> +
> >> + memset(&pipe_cfg, 0, sizeof(struct dpu_hw_pipe_cfg));
> >> +
> >> + fmt = to_dpu_format(msm_framebuffer_format(fb));
> >> + _dpu_plane_set_scanout(plane, pstate, &pipe_cfg, fb);
> >> +
> >> + if (fb)
> >> + DPU_DEBUG_PLANE(pdpu, "FB[%u] " DRM_RECT_FP_FMT "->crtc%u "
> >> DRM_RECT_FMT
> >> + ", %4.4s ubwc %d\n", fb->base.id,
> >> DRM_RECT_FP_ARG(&state->src),
> >> + crtc->base.id, DRM_RECT_ARG(&state->dst),
> >> + (char *)&fmt->base.pixel_format,
> >> DPU_FORMAT_IS_UBWC(fmt));
> >> pipe_cfg.src_rect = state->src;
> >> @@ -1155,12 +1177,6 @@ static void dpu_plane_sspp_atomic_update(struct
> >> drm_plane *plane)
> >> pipe_cfg.dst_rect = state->dst;
> >> - /* override for color fill */
> >> - if (pdpu->color_fill & DPU_PLANE_COLOR_FILL_FLAG) {
> >> - /* skip remaining processing on color fill */
> >> - return;
> >> - }
> >> -
> >> if (pdpu->pipe_hw->ops.setup_rects) {
> >> pdpu->pipe_hw->ops.setup_rects(pdpu->pipe_hw,
> >> &pipe_cfg,
> >> @@ -1511,6 +1527,7 @@ struct drm_plane *dpu_plane_init(struct
> >> drm_device *dev,
> >> DPU_ERROR("failed to install zpos property, rc = %d\n", ret);
> >> drm_plane_create_alpha_property(plane);
> >> + drm_plane_create_solid_fill_property(plane);
> >> drm_plane_create_blend_mode_property(plane,
> >> BIT(DRM_MODE_BLEND_PIXEL_NONE) |
> >> BIT(DRM_MODE_BLEND_PREMULTI) |
> >
> > --
> > With best wishes
> > Dmitry
> >
>
More information about the dri-devel
mailing list