[PATCH v9 6/9] drm/bridge: anx7625: Register Type C mode switches

[Pin-yen Lin]

Hi Chen-Yu,

Thanks for the review.

On Mon, Jan 9, 2023 at 7:26 PM Chen-Yu Tsai <wenst at chromium.org> wrote:
>
> On Mon, Jan 9, 2023 at 4:41 PM Pin-yen Lin <treapking at chromium.org> wrote:
> >
> > Register USB Type-C mode switches when the "mode-switch" property and
> > relevant port are available in Device Tree. Configure the crosspoint
>            ^ ports
>
Thanks for catching this. I'll fix in v10.
> > switch based on the entered alternate mode for a specific Type-C
> > connector.
>
> You should also mention that the "one mode switch" scenario is not
> covered in this implementation, due to lack of actual hardware.

If I understand correctly, we should use "orientation-switch"[1]
instead when the crosspoint switch on anx7625 is used to support
different orientations of the Type-C connector.

I'll add some explanations around this in the commit message in v10.

[1]: https://docs.kernel.org/driver-api/usb/typec.html#multiplexer-demultiplexer-switches
>
> > Signed-off-by: Pin-yen Lin <treapking at chromium.org>
> >
> > ---
> >
> > (no changes since v7)
> >
> > Changes in v7:
> > - Fixed style issues in anx7625 driver
> > - Removed DT property validation in anx7625 driver.
> > - Extracted common codes to another commit.
> >
> > Changes in v6:
> > - Squashed to a single patch
> >
> >  drivers/gpu/drm/bridge/analogix/Kconfig   |  1 +
> >  drivers/gpu/drm/bridge/analogix/anx7625.c | 88 +++++++++++++++++++++++
> >  drivers/gpu/drm/bridge/analogix/anx7625.h | 13 ++++
> >  3 files changed, 102 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/bridge/analogix/Kconfig b/drivers/gpu/drm/bridge/analogix/Kconfig
> > index 173dada218ec..992b43ed1dd7 100644
> > --- a/drivers/gpu/drm/bridge/analogix/Kconfig
> > +++ b/drivers/gpu/drm/bridge/analogix/Kconfig
> > @@ -34,6 +34,7 @@ config DRM_ANALOGIX_ANX7625
> >         tristate "Analogix Anx7625 MIPI to DP interface support"
> >         depends on DRM
> >         depends on OF
> > +       depends on TYPEC || TYPEC=n
> >         select DRM_DISPLAY_DP_HELPER
> >         select DRM_DISPLAY_HDCP_HELPER
> >         select DRM_DISPLAY_HELPER
> > diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c
> > index 1cf242130b91..2bb504a8d789 100644
> > --- a/drivers/gpu/drm/bridge/analogix/anx7625.c
> > +++ b/drivers/gpu/drm/bridge/analogix/anx7625.c
> > @@ -15,6 +15,8 @@
> >  #include <linux/regulator/consumer.h>
> >  #include <linux/slab.h>
> >  #include <linux/types.h>
> > +#include <linux/usb/typec_dp.h>
> > +#include <linux/usb/typec_mux.h>
> >  #include <linux/workqueue.h>
> >
> >  #include <linux/of_gpio.h>
> > @@ -2572,6 +2574,86 @@ static void anx7625_runtime_disable(void *data)
> >         pm_runtime_disable(data);
> >  }
> >
> > +static void anx7625_set_crosspoint_switch(struct anx7625_data *ctx,
> > +                                         enum typec_orientation orientation)
> > +{
> > +       if (orientation == TYPEC_ORIENTATION_NORMAL) {
> > +               anx7625_reg_write(ctx, ctx->i2c.tcpc_client, TCPC_SWITCH_0,
> > +                                 SW_SEL1_SSRX_RX1 | SW_SEL1_DPTX0_RX2);
> > +               anx7625_reg_write(ctx, ctx->i2c.tcpc_client, TCPC_SWITCH_1,
> > +                                 SW_SEL2_SSTX_TX1 | SW_SEL2_DPTX1_TX2);
> > +       } else if (orientation == TYPEC_ORIENTATION_REVERSE) {
> > +               anx7625_reg_write(ctx, ctx->i2c.tcpc_client, TCPC_SWITCH_0,
> > +                                 SW_SEL1_SSRX_RX2 | SW_SEL1_DPTX0_RX1);
> > +               anx7625_reg_write(ctx, ctx->i2c.tcpc_client, TCPC_SWITCH_1,
> > +                                 SW_SEL2_SSTX_TX2 | SW_SEL2_DPTX1_TX1);
> > +       }
> > +}
> > +
> > +static void anx7625_typec_two_ports_update(struct anx7625_data *ctx)
> > +{
> > +       struct drm_dp_typec_switch_desc switch_desc = ctx->switch_desc;
> > +       /* Check if both ports available and do nothing to retain the current one */
> > +       if (switch_desc.typec_ports[0].dp_connected && switch_desc.typec_ports[1].dp_connected)
> > +               return;
> > +
> > +       if (switch_desc.typec_ports[0].dp_connected)
> > +               anx7625_set_crosspoint_switch(ctx, TYPEC_ORIENTATION_NORMAL);
> > +       else if (switch_desc.typec_ports[1].dp_connected)
> > +               anx7625_set_crosspoint_switch(ctx, TYPEC_ORIENTATION_REVERSE);
> > +}
> > +
> > +static int anx7625_typec_mux_set(struct typec_mux_dev *mux,
> > +                                struct typec_mux_state *state)
> > +{
> > +       struct drm_dp_typec_port_data *port_data = typec_mux_get_drvdata(mux);
> > +       struct anx7625_data *ctx = (struct anx7625_data *) port_data->data;
> > +       struct device *dev = &ctx->client->dev;
> > +       struct drm_dp_typec_switch_desc switch_desc = ctx->switch_desc;
> > +       bool new_dp_connected, old_dp_connected;
> > +
>
> And place a TODO note here.

I'll add it in v10.
>
> Otherwise this looks OK.
>
> Also,
>
> Tested-by: Chen-Yu Tsai <wenst at chromium.org>
> on MT8192 based Hayato (ASUS Chromebook Flip CM3200).
>
> And this also uncovered a deadlock in the unplug & disable path.
> I'll send a fix for that later once I figure out all the details.
Thank you so much for this!