[PATCH v10 4/9] dt-bindings: display: bridge: anx7625: Add mode-switch support

[Dmitry Baryshkov]

On 12/01/2023 06:20, Pin-yen Lin wrote:
> Analogix 7625 can be used in systems to switch the DP traffic between
> two downstreams, which can be USB Type-C DisplayPort alternate mode
> lane or regular DisplayPort output ports.
> 
> Update the binding to accommodate this usage by introducing a
> data-lanes and a mode-switch property on endpoints.
> 
> Also include the link to the product brief in the bindings.
> 
> Signed-off-by: Pin-yen Lin <treapking at chromium.org>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
> Reviewed-by: Chen-Yu Tsai <wenst at chromium.org>
> Tested-by: Chen-Yu Tsai <wenst at chromium.org>
> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>
> 
> ---
> 
> Changes in v10:
> - Collected Reviewed-by and Tested-by tags
> 
> Changes in v9:
> - Collected Reviewed-by tag
> 
> Changes in v8:
> - Updated anx7625 bindings for data-lane property
> - Fixed the subject prefix
> 
> Changes in v7:
> - Fixed issues reported by dt_binding_check
> - Updated the schema and the example dts for data-lanes.
> - Changed to generic naming for the example dts node.
> 
> Changes in v6:
> - Remove switches node and use endpoints and data-lanes property to
>    describe the connections.
> 
>   .../display/bridge/analogix,anx7625.yaml      | 99 ++++++++++++++++++-
>   1 file changed, 96 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> index 4590186c4a0b..b49a350c40e3 100644
> --- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> @@ -12,7 +12,8 @@ maintainers:
>   
>   description: |
>     The ANX7625 is an ultra-low power 4K Mobile HD Transmitter
> -  designed for portable devices.
> +  designed for portable devices. Product brief is available at
> +  https://www.analogix.com/en/system/files/AA-002291-PB-6-ANX7625_ProductBrief.pdf
>   
>   properties:
>     compatible:
> @@ -112,10 +113,48 @@ properties:
>                 data-lanes: true
>   
>         port at 1:
> -        $ref: /schemas/graph.yaml#/properties/port
> +        $ref: /schemas/graph.yaml#/$defs/port-base
>           description:
>             Video port for panel or connector.
>   
> +        patternProperties:
> +          "^endpoint@[01]$":
> +            $ref: /schemas/graph.yaml#/$defs/endpoint-base
> +            unevaluatedProperties: false
> +
> +            properties:
> +              reg:
> +                maxItems: 1

Please remove duplicates to the graph.yaml. You have several of them here.

> +
> +              remote-endpoint: true
> +
> +              data-lanes:
> +                oneOf:
> +                  - items:
> +                      - enum: [0, 1, 2, 3]
> +
> +                  - items:
> +                      - const: 0
> +                      - const: 1
> +
> +                  - items:
> +                      - const: 2
> +                      - const: 3
> +
> +                  - items:
> +                      - const: 0
> +                      - const: 1
> +                      - const: 2
> +                      - const: 3
> +
> +              mode-switch:
> +                type: boolean
> +                description: Register this node as a Type-C mode switch or not.
> +
> +            required:
> +              - reg
> +              - remote-endpoint
> +
>       required:
>         - port at 0
>         - port at 1
> @@ -164,8 +203,12 @@ examples:
>                   };
>   
>                   mipi2dp_bridge_out: port at 1 {
> +                    #address-cells = <1>;
> +                    #size-cells = <0>;
> +
>                       reg = <1>;
> -                    anx7625_out: endpoint {
> +                    anx7625_out: endpoint at 0 {

But why? It's perfectly fine from the graph perspective to omit the 
index if there is jus a single endpoint.

> +                        reg = <0>;
>                           remote-endpoint = <&panel_in>;
>                       };
>                   };
> @@ -186,3 +229,53 @@ examples:
>               };
>           };
>       };
> +  - |
> +    i2c3 {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        encoder at 58 {
> +            compatible = "analogix,anx7625";
> +            reg = <0x58>;
> +            pinctrl-names = "default";
> +            pinctrl-0 = <&anx7625_dp_pins>;
> +            enable-gpios = <&pio 176 GPIO_ACTIVE_HIGH>;
> +            reset-gpios = <&pio 177 GPIO_ACTIVE_HIGH>;
> +            vdd10-supply = <&pp1100_dpbrdg>;
> +            vdd18-supply = <&pp1800_dpbrdg_dx>;
> +            vdd33-supply = <&pp3300_dpbrdg_dx>;
> +            analogix,audio-enable;
> +
> +            ports {
> +                #address-cells = <1>;
> +                #size-cells = <0>;
> +
> +                port at 0 {
> +                    reg = <0>;
> +                    anx7625_dp_in: endpoint {
> +                        bus-type = <7>;
> +                        remote-endpoint = <&dpi_out>;
> +                    };
> +                };
> +
> +                port at 1 {
> +                    #address-cells = <1>;
> +                    #size-cells = <0>;
> +
> +                    reg = <1>;
> +                    anx_typec0: endpoint at 0 {
> +                        reg = <0>;
> +                        mode-switch;
> +                        data-lanes = <0 1>;
> +                        remote-endpoint = <&typec_port0>;
> +                    };
> +                    anx_typec1: endpoint at 1 {
> +                        reg = <1>;
> +                        mode-switch;
> +                        data-lanes = <2 3>;
> +                        remote-endpoint = <&typec_port1>;
> +                    };
> +                };
> +            };
> +        };
> +    };

-- 
With best wishes
Dmitry