[v3, 3/7] drm/bridge_connector: rely on drm_kms_helper_poll_* for HPD enablement
Neil Armstrong
neil.armstrong at linaro.org
Thu Jan 12 09:35:02 UTC 2023
On 11/01/2023 13:41, Marek Szyprowski wrote:
> On 02.11.2022 19:07, Dmitry Baryshkov wrote:
>> Use drm_connector's helpers enable_hpd and disable_hpd to enable and
>> disable HPD automatically by the means of drm_kms_helper_poll_*
>> functions. As the drm_bridge_connector_enable_hpd() and
>> drm_bridge_connector_disable_hpd() functions are now unused, replace
>> them with stubs to ease driver migration.
>>
>> Enabling the HPD from drm_bridge_connector_init() can happen too early,
>> before the driver is prepared to handle HPD events. As the
>> drm_bridge_connector_enable_hpd() is empty anyway, drop this call
>> anyway.
>>
>> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
>> ---
>
> This patch, merged to recent linux-next as commit 92d755d8f13b
> ("drm/bridge_connector: rely on drm_kms_helper_poll_* for HPD
> enablement"), triggers the following warning on all my Amlogic Meson
> based boards:
>
> ------------[ cut here ]------------
> Hot plug detection already enabled
> WARNING: CPU: 2 PID: 285 at drivers/gpu/drm/drm_bridge.c:1257
> drm_bridge_hpd_enable+0x90/0xa0
> Modules linked in: snd_soc_meson_axg_frddr snd_soc_meson_axg_fifo
> dwmac_generic panfrost(+) reset_meson_audio_arb(+) drm_shmem_helper
> meson_dw_hdmi(+) dw_hdmi rc_odroid drm_display_helper meson_ir(+)
> gpu_sched meson_rng rng_core meson_gxbb_wdt crct10dif_ce dwmac_meson8b
> stmmac_platform snd_soc_meson_axg_sound_card snd_soc_meson_card_utils
> mdio_mux_meson_g12a stmmac meson_drm pwm_meson pcs_xpcs meson_canvas
> snd_soc_meson_axg_tdm_interface rtc_meson_vrtc
> snd_soc_meson_axg_tdm_formatter nvmem_meson_efuse display_connector
> CPU: 2 PID: 285 Comm: systemd-udevd Not tainted 6.1.0-rc6+ #13236
> Hardware name: Hardkernel ODROID-C4 (DT)
> pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
> pc : drm_bridge_hpd_enable+0x90/0xa0
> lr : drm_bridge_hpd_enable+0x90/0xa0
> ...
> Call trace:
> drm_bridge_hpd_enable+0x90/0xa0
> _drm_bridge_connector_enable_hpd+0x24/0x34
Weird because _drm_bridge_connector_enable_hpd() has been removed with
4c00ac500d0e ("drm/bridge_connector: drop drm_bridge_connector_en/disable_hpd()")
> drm_kms_helper_poll_enable.part.0+0x50/0xd0
It seems drm_kms_helper_poll_enable is called again by
drm_helper_probe_single_connector_modes() because poll_running isn't set.
Can you try with this change:
===============><===========================================
diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c
index 7973f2589ced..5d60d4fd868f 100644
--- a/drivers/gpu/drm/drm_probe_helper.c
+++ b/drivers/gpu/drm/drm_probe_helper.c
@@ -245,7 +245,7 @@ void drm_kms_helper_poll_enable(struct drm_device *dev)
struct drm_connector_list_iter conn_iter;
unsigned long delay = DRM_OUTPUT_POLL_PERIOD;
- if (!dev->mode_config.poll_enabled || !drm_kms_helper_poll)
+ if (!dev->mode_config.poll_init || !drm_kms_helper_poll || dev->mode_config.poll_enabled)
return;
drm_connector_list_iter_begin(dev, &conn_iter);
@@ -279,6 +279,8 @@ void drm_kms_helper_poll_enable(struct drm_device *dev)
if (poll)
schedule_delayed_work(&dev->mode_config.output_poll_work, delay);
+
+ dev->mode_config.poll_enabled = true;
}
EXPORT_SYMBOL(drm_kms_helper_poll_enable);
@@ -561,7 +563,7 @@ int drm_helper_probe_single_connector_modes(struct drm_connector *connector,
* disable itself again.
*/
dev->mode_config.delayed_event = true;
- if (dev->mode_config.poll_enabled)
+ if (dev->mode_config.poll_init)
schedule_delayed_work(&dev->mode_config.output_poll_work,
0);
}
@@ -703,7 +705,7 @@ static void output_poll_execute(struct work_struct *work)
bool repoll = false, changed;
u64 old_epoch_counter;
- if (!dev->mode_config.poll_enabled)
+ if (!dev->mode_config.poll_init)
return;
/* Pick up any changes detected by the probe functions. */
@@ -813,11 +815,11 @@ static void drm_kms_helper_poll_disable_fini(struct drm_device *dev, bool fini)
struct drm_connector *connector;
struct drm_connector_list_iter conn_iter;
- if (!dev->mode_config.poll_enabled)
+ if (!dev->mode_config.poll_init || !dev->mode_config.poll_enabled)
return;
if (fini)
- dev->mode_config.poll_enabled = false;
+ dev->mode_config.poll_init = false;
drm_connector_list_iter_begin(dev, &conn_iter);
drm_for_each_connector_iter(connector, &conn_iter) {
@@ -830,6 +832,8 @@ static void drm_kms_helper_poll_disable_fini(struct drm_device *dev, bool fini)
drm_connector_list_iter_end(&conn_iter);
cancel_delayed_work_sync(&dev->mode_config.output_poll_work);
+
+ dev->mode_config.poll_enabled = false;
}
/**
@@ -874,7 +878,7 @@ EXPORT_SYMBOL(drm_kms_helper_poll_disable);
void drm_kms_helper_poll_init(struct drm_device *dev)
{
INIT_DELAYED_WORK(&dev->mode_config.output_poll_work, output_poll_execute);
- dev->mode_config.poll_enabled = true;
+ dev->mode_config.poll_init = true;
drm_kms_helper_poll_enable(dev);
}
@@ -1003,7 +1007,7 @@ bool drm_helper_hpd_irq_event(struct drm_device *dev)
struct drm_connector_list_iter conn_iter;
int changed = 0;
- if (!dev->mode_config.poll_enabled)
+ if (!dev->mode_config.poll_init)
return false;
mutex_lock(&dev->mode_config.mutex);
diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h
index e5b053001d22..86c5f66f1a6c 100644
--- a/include/drm/drm_mode_config.h
+++ b/include/drm/drm_mode_config.h
@@ -345,6 +345,7 @@ struct drm_mode_config_funcs {
* @max_width: maximum fb pixel width on this device
* @max_height: maximum fb pixel height on this device
* @funcs: core driver provided mode setting functions
+ * @poll_init: track polling initialization for this device
* @poll_enabled: track polling support for this device
* @poll_running: track polling status for this device
* @delayed_event: track delayed poll uevent deliver for this device
@@ -543,6 +544,7 @@ struct drm_mode_config {
const struct drm_mode_config_funcs *funcs;
/* output poll support */
+ bool poll_init;
bool poll_enabled;
bool poll_running;
bool delayed_event;
===============><===========================================
Neil
> drm_helper_probe_single_connector_modes+0x400/0x530
> drm_client_modeset_probe+0x1ec/0xba0
> __drm_fb_helper_initial_config_and_unlock+0x4c/0x630
> drm_fb_helper_initial_config+0x50/0x60
> drm_fbdev_client_hotplug+0xc4/0x150
> drm_fbdev_generic_setup+0x88/0x150
> meson_drv_bind_master+0x3d4/0x4a0 [meson_drm]
> meson_drv_bind+0x14/0x20 [meson_drm]
> try_to_bring_up_aggregate_device+0x164/0x1d0
> __component_add+0xa8/0x174
> component_add+0x14/0x20
> meson_dw_hdmi_probe+0x1c/0x30 [meson_dw_hdmi]
> platform_probe+0x68/0xe0
> really_probe+0xbc/0x2e0
> __driver_probe_device+0x78/0xe0
> driver_probe_device+0x3c/0x160
> __driver_attach+0x88/0x1a0
> bus_for_each_dev+0x70/0xd0
> driver_attach+0x24/0x30
> bus_add_driver+0x154/0x204
> driver_register+0x78/0x130
> __platform_driver_register+0x28/0x34
> meson_dw_hdmi_platform_driver_init+0x24/0x1000 [meson_dw_hdmi]
> do_one_initcall+0x74/0x400
> do_init_module+0x48/0x1d4
> load_module+0x1818/0x1de0
> __do_sys_finit_module+0xc0/0x114
> __arm64_sys_finit_module+0x20/0x30
> invoke_syscall+0x48/0x114
> el0_svc_common.constprop.0+0x60/0x11c
> do_el0_svc_compat+0x1c/0x40
> el0_svc_compat+0x48/0xc0
> el0t_32_sync_handler+0x90/0x140
> el0t_32_sync+0x190/0x194
> irq event stamp: 17422
> hardirqs last enabled at (17421): [<ffff800009196058>]
> __schedule+0x998/0xa14
> hardirqs last disabled at (17422): [<ffff80000918e4a4>] el1_dbg+0x24/0x90
> softirqs last enabled at (17404): [<ffff80000801046c>] _stext+0x46c/0x5d8
> softirqs last disabled at (17383): [<ffff8000080166d0>]
> ____do_softirq+0x10/0x20
> ---[ end trace 0000000000000000 ]---
>
> I looks that this change requires some additional changes/fixes in the
> drivers/gpu/drm/meson/meson_dw_hdmi.c
>
>
>> drivers/gpu/drm/drm_bridge_connector.c | 18 +++++++++++++-----
>> 1 file changed, 13 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/drm_bridge_connector.c b/drivers/gpu/drm/drm_bridge_connector.c
>> index 1c7d936523df..0e13bc87a6ac 100644
>> --- a/drivers/gpu/drm/drm_bridge_connector.c
>> +++ b/drivers/gpu/drm/drm_bridge_connector.c
>> @@ -136,6 +136,11 @@ static void drm_bridge_connector_hpd_cb(void *cb_data,
>> * This is typically used by display drivers in their resume handler.
>> */
>> void drm_bridge_connector_enable_hpd(struct drm_connector *connector)
>> +{
>> +}
>> +EXPORT_SYMBOL_GPL(drm_bridge_connector_enable_hpd);
>> +
>> +static void _drm_bridge_connector_enable_hpd(struct drm_connector *connector)
>> {
>> struct drm_bridge_connector *bridge_connector =
>> to_drm_bridge_connector(connector);
>> @@ -145,7 +150,6 @@ void drm_bridge_connector_enable_hpd(struct drm_connector *connector)
>> drm_bridge_hpd_enable(hpd, drm_bridge_connector_hpd_cb,
>> bridge_connector);
>> }
>> -EXPORT_SYMBOL_GPL(drm_bridge_connector_enable_hpd);
>>
>> /**
>> * drm_bridge_connector_disable_hpd - Disable hot-plug detection for the
>> @@ -156,6 +160,11 @@ EXPORT_SYMBOL_GPL(drm_bridge_connector_enable_hpd);
>> * This is typically used by display drivers in their suspend handler.
>> */
>> void drm_bridge_connector_disable_hpd(struct drm_connector *connector)
>> +{
>> +}
>> +EXPORT_SYMBOL_GPL(drm_bridge_connector_disable_hpd);
>> +
>> +static void _drm_bridge_connector_disable_hpd(struct drm_connector *connector)
>> {
>> struct drm_bridge_connector *bridge_connector =
>> to_drm_bridge_connector(connector);
>> @@ -164,7 +173,6 @@ void drm_bridge_connector_disable_hpd(struct drm_connector *connector)
>> if (hpd)
>> drm_bridge_hpd_disable(hpd);
>> }
>> -EXPORT_SYMBOL_GPL(drm_bridge_connector_disable_hpd);
>>
>> /* -----------------------------------------------------------------------------
>> * Bridge Connector Functions
>> @@ -305,6 +313,8 @@ static int drm_bridge_connector_get_modes(struct drm_connector *connector)
>> static const struct drm_connector_helper_funcs drm_bridge_connector_helper_funcs = {
>> .get_modes = drm_bridge_connector_get_modes,
>> /* No need for .mode_valid(), the bridges are checked by the core. */
>> + .enable_hpd = _drm_bridge_connector_enable_hpd,
>> + .disable_hpd = _drm_bridge_connector_disable_hpd,
>> };
>>
>> /* -----------------------------------------------------------------------------
>> @@ -387,10 +397,8 @@ struct drm_connector *drm_bridge_connector_init(struct drm_device *drm,
>> connector_type, ddc);
>> drm_connector_helper_add(connector, &drm_bridge_connector_helper_funcs);
>>
>> - if (bridge_connector->bridge_hpd) {
>> + if (bridge_connector->bridge_hpd)
>> connector->polled = DRM_CONNECTOR_POLL_HPD;
>> - drm_bridge_connector_enable_hpd(connector);
>> - }
>> else if (bridge_connector->bridge_detect)
>> connector->polled = DRM_CONNECTOR_POLL_CONNECT
>> | DRM_CONNECTOR_POLL_DISCONNECT;
>
> Best regards
More information about the dri-devel
mailing list