[PATCH v3 4/6] ARM: dts: omap: Use new media bus type macros
Laurent Pinchart
laurent.pinchart at ideasonboard.com
Sat Jan 14 15:37:24 UTC 2023
Tony, could you take this patch in your tree for v6.3 ? The two patches
that it depends on have both been merged in v6.2.
On Thu, Jun 16, 2022 at 01:14:08AM +0300, Laurent Pinchart wrote:
> Now that a header exists with macros for the media interface bus-type
> values, replace hardcoding numerical constants with the corresponding
> macros in the DT sources.
>
> Signed-off-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
> ---
> arch/arm/boot/dts/omap3-n900.dts | 5 +++--
> 1 file changed, 3 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
> index d40c3d2c4914..9cad9d6a83e2 100644
> --- a/arch/arm/boot/dts/omap3-n900.dts
> +++ b/arch/arm/boot/dts/omap3-n900.dts
> @@ -9,6 +9,7 @@
> #include "omap34xx.dtsi"
> #include <dt-bindings/input/input.h>
> #include <dt-bindings/leds/common.h>
> +#include <dt-bindings/media/video-interfaces.h>
>
> /*
> * Default secure signed bootloader (Nokia X-Loader) does not enable L3 firewall
> @@ -194,7 +195,7 @@ port at 1 {
>
> csi_isp: endpoint {
> remote-endpoint = <&csi_cam1>;
> - bus-type = <3>; /* CCP2 */
> + bus-type = <MEDIA_BUS_TYPE_CCP2>;
> clock-lanes = <1>;
> data-lanes = <0>;
> lane-polarity = <0 0>;
> @@ -835,7 +836,7 @@ cam1: camera at 3e {
>
> port {
> csi_cam1: endpoint {
> - bus-type = <3>; /* CCP2 */
> + bus-type = <MEDIA_BUS_TYPE_CCP2>;
> strobe = <1>;
> clock-inv = <0>;
> crc = <1>;
--
Regards,
Laurent Pinchart
More information about the dri-devel
mailing list