[PATCH 2/6] drm: rcar-du: lvds: Add reset control

Tomi Valkeinen tomi.valkeinen+renesas at ideasonboard.com
Tue Jan 17 13:51:50 UTC 2023


From: Koji Matsuoka <koji.matsuoka.xm at renesas.com>

Reset LVDS using the reset control as CPG reset/release is required in
H/W manual sequence.

Signed-off-by: Koji Matsuoka <koji.matsuoka.xm at renesas.com>
Signed-off-by: LUU HOAI <hoai.luu.ub at renesas.com>
[tomi.valkeinen: Rewrite the patch description]
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas at ideasonboard.com>
---
 drivers/gpu/drm/rcar-du/Kconfig     |  1 +
 drivers/gpu/drm/rcar-du/rcar_lvds.c | 15 +++++++++++++++
 2 files changed, 16 insertions(+)

diff --git a/drivers/gpu/drm/rcar-du/Kconfig b/drivers/gpu/drm/rcar-du/Kconfig
index a8f862c68b4f..151e400b996d 100644
--- a/drivers/gpu/drm/rcar-du/Kconfig
+++ b/drivers/gpu/drm/rcar-du/Kconfig
@@ -43,6 +43,7 @@ config DRM_RCAR_LVDS
 	select DRM_PANEL
 	select OF_FLATTREE
 	select OF_OVERLAY
+	select RESET_CONTROLLER
 
 config DRM_RCAR_USE_MIPI_DSI
 	bool "R-Car DU MIPI DSI Encoder Support"
diff --git a/drivers/gpu/drm/rcar-du/rcar_lvds.c b/drivers/gpu/drm/rcar-du/rcar_lvds.c
index 81a060c2fe3f..674b727cdaa2 100644
--- a/drivers/gpu/drm/rcar-du/rcar_lvds.c
+++ b/drivers/gpu/drm/rcar-du/rcar_lvds.c
@@ -16,6 +16,7 @@
 #include <linux/of_device.h>
 #include <linux/of_graph.h>
 #include <linux/platform_device.h>
+#include <linux/reset.h>
 #include <linux/slab.h>
 #include <linux/sys_soc.h>
 
@@ -60,6 +61,7 @@ struct rcar_lvds_device_info {
 struct rcar_lvds {
 	struct device *dev;
 	const struct rcar_lvds_device_info *info;
+	struct reset_control *rstc;
 
 	struct drm_bridge bridge;
 
@@ -316,6 +318,8 @@ int rcar_lvds_pclk_enable(struct drm_bridge *bridge, unsigned long freq)
 
 	dev_dbg(lvds->dev, "enabling LVDS PLL, freq=%luHz\n", freq);
 
+	reset_control_deassert(lvds->rstc);
+
 	ret = clk_prepare_enable(lvds->clocks.mod);
 	if (ret < 0)
 		return ret;
@@ -338,6 +342,8 @@ void rcar_lvds_pclk_disable(struct drm_bridge *bridge)
 	rcar_lvds_write(lvds, LVDPLLCR, 0);
 
 	clk_disable_unprepare(lvds->clocks.mod);
+
+	reset_control_assert(lvds->rstc);
 }
 EXPORT_SYMBOL_GPL(rcar_lvds_pclk_disable);
 
@@ -396,6 +402,8 @@ static void __rcar_lvds_atomic_enable(struct drm_bridge *bridge,
 	u32 lvdcr0;
 	int ret;
 
+	reset_control_deassert(lvds->rstc);
+
 	ret = clk_prepare_enable(lvds->clocks.mod);
 	if (ret < 0)
 		return;
@@ -552,6 +560,7 @@ static void rcar_lvds_atomic_disable(struct drm_bridge *bridge,
 						       old_bridge_state);
 
 	clk_disable_unprepare(lvds->clocks.mod);
+	reset_control_assert(lvds->rstc);
 }
 
 static bool rcar_lvds_mode_fixup(struct drm_bridge *bridge,
@@ -844,6 +853,12 @@ static int rcar_lvds_probe(struct platform_device *pdev)
 	if (ret < 0)
 		return ret;
 
+	lvds->rstc = devm_reset_control_get(&pdev->dev, NULL);
+	if (IS_ERR(lvds->rstc)) {
+		dev_err(&pdev->dev, "failed to get cpg reset\n");
+		return PTR_ERR(lvds->rstc);
+	}
+
 	drm_bridge_add(&lvds->bridge);
 
 	return 0;
-- 
2.34.1



More information about the dri-devel mailing list