[PATCH v2 1/9] arm64: dts: mediatek: mt8186: Add MTU3 nodes

[AngeloGioacchino Del Regno]

Il 18/01/23 10:18, Allen-KH Cheng ha scritto:
> Add MTU3 nodes for MT8186 SoC.
> 
> Signed-off-by: Allen-KH Cheng <allen-kh.cheng at mediatek.com>
> Tested-by: Chen-Yu Tsai <wenst at chromium.org>
> ---
>   arch/arm64/boot/dts/mediatek/mt8186.dtsi | 75 ++++++++++++++++++++++++
>   1 file changed, 75 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt8186.dtsi b/arch/arm64/boot/dts/mediatek/mt8186.dtsi
> index c0a3afd55eaf..3d88480913eb 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8186.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8186.dtsi
> @@ -908,6 +908,43 @@
>   			status = "disabled";
>   		};
>   
> +		ssusb0: usb at 11201000 {
> +			compatible = "mediatek,mt8186-mtu3",
> +				     "mediatek,mtu3";

78 columns; compatibles fit in one line.

> +			reg = <0 0x11201000 0 0x2dff>,
> +			      <0 0x11203e00 0 0x0100>;

80 cols; regs fit in one line.

> +			reg-names = "mac", "ippc";
> +			clocks = <&topckgen CLK_TOP_USB_TOP>,
> +				 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_REF>,
> +				 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_HCLK>,
> +				 <&infracfg_ao CLK_INFRA_AO_ICUSB>;
> +			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck";
> +			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH 0>;
> +			phys = <&u2port0 PHY_TYPE_USB2>;
> +			power-domains = <&spm MT8186_POWER_DOMAIN_SSUSB>;
> +			#address-cells = <2>;
> +			#size-cells = <2>;
> +			ranges;
> +			status = "disabled";
> +
> +			usb_host0: usb at 11200000 {
> +				compatible = "mediatek,mt8186-xhci",
> +					     "mediatek,mtk-xhci";

90 cols; fits in one line.

...same comments for ssusb1 :-)

> +				reg = <0 0x11200000 0 0x1000>;
> +				reg-names = "mac";
> +				clocks = <&topckgen CLK_TOP_USB_TOP>,
> +					 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_REF>,
> +					 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_HCLK>,
> +					 <&infracfg_ao CLK_INFRA_AO_ICUSB>,
> +					 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_XHCI>;
> +				clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", "xhci_ck";
> +				interrupts = <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH 0>;
> +				mediatek,syscon-wakeup = <&pericfg 0x420 2>;
> +				wakeup-source;
> +				status = "disabled";
> +			};
> +		};
> +
>   		mmc0: mmc at 11230000 {
>   			compatible = "mediatek,mt8186-mmc",
>   				     "mediatek,mt8183-mmc";
> @@ -939,6 +976,44 @@
>   			status = "disabled";
>   		};
>   
> +		ssusb1: usb at 11281000 {
> +			compatible = "mediatek,mt8186-mtu3",
> +				     "mediatek,mtu3";
> +			reg = <0 0x11281000 0 0x2dff>,
> +			      <0 0x11283e00 0 0x0100>;
> +			reg-names = "mac", "ippc";
> +			clocks = <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_SYS>,
> +				 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_REF>,
> +				 <&infracfg_ao CLK_INFRA_AO_SSUSB_TOP_P1_HCLK>,
> +				 <&clk26m>;
> +			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck";
> +			interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH 0>;
> +			phys = <&u2port1 PHY_TYPE_USB2>,
> +			       <&u3port1 PHY_TYPE_USB3>;

phys fit in one line.

Regards,
Angelo