[PATCH v3 2/3] drm/rockchip: dw_hdmi: Add support for 4k at 30 resolution

[Sascha Hauer]

This adds the PLL/phy settings to support higher resolutions like 4k at 30.
The values were taken from the Rockchip downstream Kernel.

Tested-by: Michael Riesch <michael.riesch at wolfvision.net>
Link: https://lore.kernel.org/r/20220926080435.259617-3-s.hauer@pengutronix.de
Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---

Notes:
    Changes since v2:
    - Use correct mpll_cfg values, previously the 420 values were used

 drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
index 7d8bf292fedce..feba6b9becd6c 100644
--- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
@@ -161,6 +161,12 @@ static const struct dw_hdmi_mpll_config rockchip_mpll_cfg[] = {
 			{ 0x214c, 0x0003},
 			{ 0x4064, 0x0003}
 		},
+	}, {
+		340000000, {
+			{ 0x0040, 0x0003 },
+			{ 0x3b4c, 0x0003 },
+			{ 0x5a64, 0x0003 },
+		},
 	}, {
 		~0UL, {
 			{ 0x00a0, 0x000a },
@@ -186,6 +192,8 @@ static const struct dw_hdmi_curr_ctrl rockchip_cur_ctr[] = {
 		146250000, { 0x0038, 0x0038, 0x0038 },
 	}, {
 		148500000, { 0x0000, 0x0038, 0x0038 },
+	}, {
+		600000000, { 0x0000, 0x0000, 0x0000 },
 	}, {
 		~0UL,      { 0x0000, 0x0000, 0x0000},
 	}
-- 
2.30.2