[PATCH v6 2/2] backlight: ktz8866: Add support for Kinetic KTZ8866 backlight
Krzysztof Kozlowski
krzysztof.kozlowski at linaro.org
Wed Jan 18 13:39:15 UTC 2023
On 18/01/2023 14:10, Jianhua Lu wrote:
> Add support for Kinetic KTZ8866 backlight, which is used in
> Xiaomi tablet, Mi Pad 5 series. This driver lightly based on
> downstream implementation [1].
> [1] https://github.com/MiCode/Xiaomi_Kernel_OpenSource/blob/elish-r-oss/drivers/video/backlight/ktz8866.c
>
> Signed-off-by: Jianhua Lu <lujianhua000 at gmail.com>
> ---
> Changes in v2:
> - Add missing staitc modifier to ktz8866_write function.
>
> Changes in v3:
> - Add 2022 to Copyright line.
> - Sort headers.
> - Remove meaningless comment.
> - Use definitions instead of hardcoding.
> - Add missing maintainer info.
>
> Changes in v4:
> - Change 2022 to 2023.
> - Remove useless macro and enum.
> - Describe settings by devicetree.
> - Move header file to C file.
>
> Changes in v5:
> - Change "2023" to "2022, 2023" in Copyright line.
> - Set scale property for backlight.
>
> Changes in v6:
> - Correct devicetree property name.
>
> MAINTAINERS | 6 +
> drivers/video/backlight/Kconfig | 8 ++
> drivers/video/backlight/Makefile | 1 +
> drivers/video/backlight/ktz8866.c | 205 ++++++++++++++++++++++++++++++
> 4 files changed, 220 insertions(+)
> create mode 100644 drivers/video/backlight/ktz8866.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 42fc47c6edfd..2084e74e1b58 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -11674,6 +11674,12 @@ M: John Hawley <warthog9 at eaglescrag.net>
> S: Maintained
> F: tools/testing/ktest
>
> +KTZ8866 BACKLIGHT DRIVER
> +M: Jianhua Lu <lujianhua000 at gmail.com>
> +S: Maintained
> +F: Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml
> +F: drivers/video/backlight/ktz8866.c
> +
> L3MDEV
> M: David Ahern <dsahern at kernel.org>
> L: netdev at vger.kernel.org
> diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
> index 936ba1e4d35e..f7113ceb264a 100644
> --- a/drivers/video/backlight/Kconfig
> +++ b/drivers/video/backlight/Kconfig
> @@ -190,6 +190,14 @@ config BACKLIGHT_KTD253
> which is a 1-wire GPIO-controlled backlight found in some mobile
> phones.
>
> +config BACKLIGHT_KTZ8866
> + tristate "Backlight Driver for Kinetic KTZ8866"
> + depends on I2C
> + select REGMAP_I2C
> + help
> + Say Y to enable the backlight driver for the Kinetic KTZ8866
> + found in Xiaomi Mi Pad 5 series.
> +
> config BACKLIGHT_LM3533
> tristate "Backlight Driver for LM3533"
> depends on MFD_LM3533
> diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
> index e815f3f1deff..f70a819c304c 100644
> --- a/drivers/video/backlight/Makefile
> +++ b/drivers/video/backlight/Makefile
> @@ -36,6 +36,7 @@ obj-$(CONFIG_BACKLIGHT_HP680) += hp680_bl.o
> obj-$(CONFIG_BACKLIGHT_HP700) += jornada720_bl.o
> obj-$(CONFIG_BACKLIGHT_IPAQ_MICRO) += ipaq_micro_bl.o
> obj-$(CONFIG_BACKLIGHT_KTD253) += ktd253-backlight.o
> +obj-$(CONFIG_BACKLIGHT_KTZ8866) += ktz8866.o
> obj-$(CONFIG_BACKLIGHT_LM3533) += lm3533_bl.o
> obj-$(CONFIG_BACKLIGHT_LM3630A) += lm3630a_bl.o
> obj-$(CONFIG_BACKLIGHT_LM3639) += lm3639_bl.o
> diff --git a/drivers/video/backlight/ktz8866.c b/drivers/video/backlight/ktz8866.c
> new file mode 100644
> index 000000000000..ca3ac349cd10
> --- /dev/null
> +++ b/drivers/video/backlight/ktz8866.c
> @@ -0,0 +1,205 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Backlight driver for the Kinetic KTZ8866
> + *
> + * Copyright (C) 2022, 2023 Jianhua Lu <lujianhua000 at gmail.com>
> + */
> +
> +#include <linux/backlight.h>
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/i2c.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/regmap.h>
> +
> +#define DEFAULT_BRIGHTNESS 1500
> +#define MAX_BRIGHTNESS 2047
> +#define REG_MAX 0x15
> +
> +/* reg */
> +#define DEVICE_ID 0x01
> +#define BL_CFG1 0x02
> +#define BL_CFG2 0x03
> +#define BL_BRT_LSB 0x04
> +#define BL_BRT_MSB 0x05
> +#define BL_EN 0x08
> +#define LCD_BIAS_CFG1 0x09
> +#define LCD_BIAS_CFG2 0x0A
> +#define LCD_BIAS_CFG3 0x0B
> +#define LCD_BOOST_CFG 0x0C
> +#define OUTP_CFG 0x0D
> +#define OUTN_CFG 0x0E
> +#define FLAG 0x0F
> +#define BL_OPTION1 0x10
> +#define BL_OPTION2 0x11
> +#define PWM2DIG_LSBs 0x12
> +#define PWM2DIG_MSBs 0x13
> +#define BL_DIMMING 0x14
> +#define PWM_RAMP_TIME 0x15
> +
> +/* definition */
> +#define BL_EN_BIT BIT(6)
> +#define LCD_BIAS_EN 0x9F
> +#define PWM_HYST 0x5
> +
> +struct ktz8866 {
> + struct i2c_client *client;
> + struct regmap *regmap;
> + bool led_on;
> +};
> +
> +static const struct regmap_config ktz8866_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .max_register = REG_MAX,
> +};
> +
> +static int ktz8866_write(struct ktz8866 *ktz, unsigned int reg,
> + unsigned int val)
> +{
> + return regmap_write(ktz->regmap, reg, val);
> +}
> +
> +static int ktz8866_update_bits(struct ktz8866 *ktz, unsigned int reg,
> + unsigned int mask, unsigned int val)
> +{
> + return regmap_update_bits(ktz->regmap, reg, mask, val);
> +}
> +
> +static int ktz8866_backlight_update_status(struct backlight_device *backlight_dev)
> +{
> + struct ktz8866 *ktz = bl_get_data(backlight_dev);
> + unsigned int brightness = backlight_get_brightness(backlight_dev);
> +
> + if (!ktz->led_on && brightness > 0) {
> + ktz8866_update_bits(ktz, BL_EN, BL_EN_BIT, BL_EN_BIT);
> + ktz->led_on = true;
> + } else if (brightness == 0) {
> + ktz8866_update_bits(ktz, BL_EN, BL_EN_BIT, 0);
> + ktz->led_on = false;
> + msleep(10);
Why 10 ms? Document magic values. Their need, reason behind.
> + }
> +
> + /* Set brightness */
> + ktz8866_write(ktz, BL_BRT_LSB, brightness & 0x7);
> + ktz8866_write(ktz, BL_BRT_MSB, (brightness >> 3) & 0xFF);
> +
> + return 0;
> +}
> +
> +static const struct backlight_ops ktz8866_backlight_ops = {
> + .options = BL_CORE_SUSPENDRESUME,
> + .update_status = ktz8866_backlight_update_status,
> +};
> +
> +static void ktz8866_init(struct ktz8866 *ktz)
> +{
> + unsigned int val;
> +
> + if(of_property_read_u32(ktz->client->dev.of_node, "current-num-sinks", &val))
Here and in other places - not conforming to coding style. Missing space
before (.
Be sure you run checkpatch --strict and fix all relevant errors.
> + ktz8866_write(ktz, BL_EN, BIT(val) - 1);
> + else
> + /* Enable all 6 current sinks if the number of current sinks isn't specifed. */
> + ktz8866_write(ktz, BL_EN, BIT(6) - 1);
> +
> + if(of_property_read_u32(ktz->client->dev.of_node, "current-ramping-time-ms", &val)) {
> + if(val <= 128) {
> + ktz8866_write(ktz, BL_CFG2, BIT(7) | (ilog2(val) << 3) | PWM_HYST);
> + } else {
> + ktz8866_write(ktz, BL_CFG2, BIT(7) | ((5 + val / 64) << 3) | PWM_HYST);
> + }
> + }
> +
> + if(of_property_read_u32(ktz->client->dev.of_node, "led-ramping-time-ms", &val)) {
> + if(val == 0) {
> + ktz8866_write(ktz, BL_DIMMING, 0);
> + } else {
> + unsigned int ramp_off_time = ilog2(val) + 1;
> + unsigned int ramp_on_time = ramp_off_time << 4;
> + ktz8866_write(ktz, BL_DIMMING, ramp_on_time | ramp_off_time);
> + }
> + }
> +
> + if(of_property_read_bool(ktz->client->dev.of_node, "enable-lcd-bias"))
> + ktz8866_write(ktz, LCD_BIAS_CFG1, LCD_BIAS_EN);
> +}
> +
> +static int ktz8866_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct backlight_device *backlight_dev;
> + struct backlight_properties props;
> + struct ktz8866 *ktz;
> +
> + ktz = devm_kzalloc(&client->dev, sizeof(*ktz), GFP_KERNEL);
> + if (!ktz)
> + return -ENOMEM;
> +
> + ktz->client = client;
> + ktz->regmap = devm_regmap_init_i2c(client, &ktz8866_regmap_config);
> +
Drop blank line
> + if (IS_ERR(ktz->regmap)) {
> + dev_err(&client->dev, "failed to init regmap\n");
dev_err_probe
> + return PTR_ERR(ktz->regmap);
> + }
> +
> + memset(&props, 0, sizeof(props));
> + props.type = BACKLIGHT_RAW;
> + props.max_brightness = MAX_BRIGHTNESS;
> + props.brightness = DEFAULT_BRIGHTNESS;
> + props.scale = BACKLIGHT_SCALE_LINEAR;
> +
> + backlight_dev = devm_backlight_device_register(
> + &client->dev, "ktz8866-backlight", &client->dev, ktz,> + &ktz8866_backlight_ops, &props);
> +
Drop blank line
> + if (IS_ERR(backlight_dev)) {
> + dev_err(&client->dev, "failed to register backlight device\n");
dev_err_probe
> + return PTR_ERR(backlight_dev);
> + }
> +
> + ktz8866_init(ktz);
> +
> + i2c_set_clientdata(client, backlight_dev);
> + backlight_update_status(backlight_dev);
> +
> + return 0;
> +}
> +
> +static void ktz8866_remove(struct i2c_client *client)
> +{
> + struct backlight_device *backlight_dev = i2c_get_clientdata(client);
> +
> + backlight_dev->props.brightness = 0;
> + backlight_update_status(backlight_dev);
> +}
> +
> +static const struct i2c_device_id ktz8866_ids[] = {
> + { "ktz8866", 0 },
> + {},
> +};
> +MODULE_DEVICE_TABLE(i2c, ktz8866_ids);
> +
> +static const struct of_device_id ktz8866_match_table[] = {
> + {
> + .compatible = "kinetic,ktz8866",
> + },
> + {},
> +};
> +
> +static struct i2c_driver ktz8866_driver = {
> + .driver = {
> + .name = "ktz8866",
> + .of_match_table = ktz8866_match_table,
> + },
> + .probe = ktz8866_probe,
> + .remove = ktz8866_remove,
> + .id_table = ktz8866_ids,
> +};
> +
> +module_i2c_driver(ktz8866_driver);
> +
> +MODULE_DESCRIPTION("Kinetic KTZ8866 Backlight Driver");
> +MODULE_AUTHOR("Jianhua Lu <lujianhua000 at gmail.com>");
> +MODULE_LICENSE("GPL");
Best regards,
Krzysztof
More information about the dri-devel
mailing list