[PATCH v7 13/22] drm/edid: stop passing quirks around

Ville Syrjälä ville.syrjala at linux.intel.com
Wed Jan 18 16:09:58 UTC 2023


On Wed, Jan 04, 2023 at 12:05:28PM +0200, Jani Nikula wrote:
> Now that quirks are stored in display info, we can just look them up
> using the connector instead of having to pass them around.
> 
> Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
> Signed-off-by: Jani Nikula <jani.nikula at intel.com>

Reviewed-by: Ville Syrjälä <ville.syrjala at linux.intel.com>

> ---
>  drivers/gpu/drm/drm_edid.c | 34 +++++++++++++++-------------------
>  1 file changed, 15 insertions(+), 19 deletions(-)
> 
> diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
> index fd8d056e38c1..6bc0432046c8 100644
> --- a/drivers/gpu/drm/drm_edid.c
> +++ b/drivers/gpu/drm/drm_edid.c
> @@ -96,7 +96,6 @@ struct detailed_mode_closure {
>  	struct drm_connector *connector;
>  	const struct drm_edid *drm_edid;
>  	bool preferred;
> -	u32 quirks;
>  	int modes;
>  };
>  
> @@ -2887,9 +2886,9 @@ static u32 edid_get_quirks(const struct drm_edid *drm_edid)
>   * Walk the mode list for connector, clearing the preferred status on existing
>   * modes and setting it anew for the right mode ala quirks.
>   */
> -static void edid_fixup_preferred(struct drm_connector *connector,
> -				 u32 quirks)
> +static void edid_fixup_preferred(struct drm_connector *connector)
>  {
> +	const struct drm_display_info *info = &connector->display_info;
>  	struct drm_display_mode *t, *cur_mode, *preferred_mode;
>  	int target_refresh = 0;
>  	int cur_vrefresh, preferred_vrefresh;
> @@ -2897,9 +2896,9 @@ static void edid_fixup_preferred(struct drm_connector *connector,
>  	if (list_empty(&connector->probed_modes))
>  		return;
>  
> -	if (quirks & EDID_QUIRK_PREFER_LARGE_60)
> +	if (info->quirks & EDID_QUIRK_PREFER_LARGE_60)
>  		target_refresh = 60;
> -	if (quirks & EDID_QUIRK_PREFER_LARGE_75)
> +	if (info->quirks & EDID_QUIRK_PREFER_LARGE_75)
>  		target_refresh = 75;
>  
>  	preferred_mode = list_first_entry(&connector->probed_modes,
> @@ -3401,9 +3400,9 @@ drm_mode_do_interlace_quirk(struct drm_display_mode *mode,
>   */
>  static struct drm_display_mode *drm_mode_detailed(struct drm_connector *connector,
>  						  const struct drm_edid *drm_edid,
> -						  const struct detailed_timing *timing,
> -						  u32 quirks)
> +						  const struct detailed_timing *timing)
>  {
> +	const struct drm_display_info *info = &connector->display_info;
>  	struct drm_device *dev = connector->dev;
>  	struct drm_display_mode *mode;
>  	const struct detailed_pixel_timing *pt = &timing->data.pixel_data;
> @@ -3437,7 +3436,7 @@ static struct drm_display_mode *drm_mode_detailed(struct drm_connector *connecto
>  		return NULL;
>  	}
>  
> -	if (quirks & EDID_QUIRK_FORCE_REDUCED_BLANKING) {
> +	if (info->quirks & EDID_QUIRK_FORCE_REDUCED_BLANKING) {
>  		mode = drm_cvt_mode(dev, hactive, vactive, 60, true, false, false);
>  		if (!mode)
>  			return NULL;
> @@ -3449,7 +3448,7 @@ static struct drm_display_mode *drm_mode_detailed(struct drm_connector *connecto
>  	if (!mode)
>  		return NULL;
>  
> -	if (quirks & EDID_QUIRK_135_CLOCK_TOO_HIGH)
> +	if (info->quirks & EDID_QUIRK_135_CLOCK_TOO_HIGH)
>  		mode->clock = 1088 * 10;
>  	else
>  		mode->clock = le16_to_cpu(timing->pixel_clock) * 10;
> @@ -3472,7 +3471,7 @@ static struct drm_display_mode *drm_mode_detailed(struct drm_connector *connecto
>  
>  	drm_mode_do_interlace_quirk(mode, pt);
>  
> -	if (quirks & EDID_QUIRK_DETAILED_SYNC_PP) {
> +	if (info->quirks & EDID_QUIRK_DETAILED_SYNC_PP) {
>  		mode->flags |= DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC;
>  	} else {
>  		mode->flags |= (pt->misc & DRM_EDID_PT_HSYNC_POSITIVE) ?
> @@ -3485,12 +3484,12 @@ static struct drm_display_mode *drm_mode_detailed(struct drm_connector *connecto
>  	mode->width_mm = pt->width_mm_lo | (pt->width_height_mm_hi & 0xf0) << 4;
>  	mode->height_mm = pt->height_mm_lo | (pt->width_height_mm_hi & 0xf) << 8;
>  
> -	if (quirks & EDID_QUIRK_DETAILED_IN_CM) {
> +	if (info->quirks & EDID_QUIRK_DETAILED_IN_CM) {
>  		mode->width_mm *= 10;
>  		mode->height_mm *= 10;
>  	}
>  
> -	if (quirks & EDID_QUIRK_DETAILED_USE_MAXIMUM_SIZE) {
> +	if (info->quirks & EDID_QUIRK_DETAILED_USE_MAXIMUM_SIZE) {
>  		mode->width_mm = drm_edid->edid->width_cm * 10;
>  		mode->height_mm = drm_edid->edid->height_cm * 10;
>  	}
> @@ -4003,8 +4002,7 @@ do_detailed_mode(const struct detailed_timing *timing, void *c)
>  		return;
>  
>  	newmode = drm_mode_detailed(closure->connector,
> -				    closure->drm_edid, timing,
> -				    closure->quirks);
> +				    closure->drm_edid, timing);
>  	if (!newmode)
>  		return;
>  
> @@ -4027,15 +4025,13 @@ do_detailed_mode(const struct detailed_timing *timing, void *c)
>   * add_detailed_modes - Add modes from detailed timings
>   * @connector: attached connector
>   * @drm_edid: EDID block to scan
> - * @quirks: quirks to apply
>   */
>  static int add_detailed_modes(struct drm_connector *connector,
> -			      const struct drm_edid *drm_edid, u32 quirks)
> +			      const struct drm_edid *drm_edid)
>  {
>  	struct detailed_mode_closure closure = {
>  		.connector = connector,
>  		.drm_edid = drm_edid,
> -		.quirks = quirks,
>  	};
>  
>  	if (drm_edid->edid->revision >= 4)
> @@ -6684,7 +6680,7 @@ static int _drm_edid_connector_update(struct drm_connector *connector,
>  	 *
>  	 * XXX order for additional mode types in extension blocks?
>  	 */
> -	num_modes += add_detailed_modes(connector, drm_edid, info->quirks);
> +	num_modes += add_detailed_modes(connector, drm_edid);
>  	num_modes += add_cvt_modes(connector, drm_edid);
>  	num_modes += add_standard_modes(connector, drm_edid);
>  	num_modes += add_established_modes(connector, drm_edid);
> @@ -6695,7 +6691,7 @@ static int _drm_edid_connector_update(struct drm_connector *connector,
>  		num_modes += add_inferred_modes(connector, drm_edid);
>  
>  	if (info->quirks & (EDID_QUIRK_PREFER_LARGE_60 | EDID_QUIRK_PREFER_LARGE_75))
> -		edid_fixup_preferred(connector, info->quirks);
> +		edid_fixup_preferred(connector);
>  
>  	if (info->quirks & EDID_QUIRK_FORCE_6BPC)
>  		info->bpc = 6;
> -- 
> 2.34.1

-- 
Ville Syrjälä
Intel


More information about the dri-devel mailing list