[PATCH 2/2] drm: lcdif: Add i.MX93 LCDIF support

Lothar Waßmann LW at KARO-electronics.de
Mon Jan 23 08:13:07 UTC 2023


Hi,

On Mon, 23 Jan 2023 15:23:58 +0800 Liu Ying wrote:
> The LCDIF embedded in i.MX93 SoC is essentially the same to those
> in i.MX8mp SoC.  However, i.MX93 LCDIF may connect with MIPI DSI
> controller through LCDIF cross line pattern(controlled by mediamix
> blk-ctrl) or connect with LVDS display bridge(LDB) directly or a
> parallel display(also through mediamix blk-ctrl), so add multiple
> encoders(with DRM_MODE_ENCODER_NONE encoder type) support in the
> LCDIF DRM driver and find a bridge to attach the relevant encoder's
> chain when needed.  While at it, derive lcdif_crtc_state structure
> from drm_crtc_state structure to introduce bus_format and bus_flags
> states so that the next downstream bridges may use consistent bus
> format and bus flags.
> 
> Signed-off-by: Liu Ying <victor.liu at nxp.com>
> ---
>  drivers/gpu/drm/mxsfb/lcdif_drv.c |  73 +++++++++--
>  drivers/gpu/drm/mxsfb/lcdif_drv.h |   6 +-
>  drivers/gpu/drm/mxsfb/lcdif_kms.c | 206 ++++++++++++++++++++----------
>  3 files changed, 208 insertions(+), 77 deletions(-)
> 
> diff --git a/drivers/gpu/drm/mxsfb/lcdif_drv.c b/drivers/gpu/drm/mxsfb/lcdif_drv.c
> index cc2ceb301b96..4d41f6b6eb14 100644
> --- a/drivers/gpu/drm/mxsfb/lcdif_drv.c
> +++ b/drivers/gpu/drm/mxsfb/lcdif_drv.c
> @@ -9,13 +9,16 @@
>  #include <linux/dma-mapping.h>
>  #include <linux/io.h>
>  #include <linux/module.h>
> +#include <linux/of.h>
>  #include <linux/of_device.h>
> +#include <linux/of_graph.h>
>  #include <linux/platform_device.h>
>  #include <linux/pm_runtime.h>
>  
>  #include <drm/drm_atomic_helper.h>
>  #include <drm/drm_bridge.h>
>  #include <drm/drm_drv.h>
> +#include <drm/drm_encoder.h>
>  #include <drm/drm_fbdev_generic.h>
>  #include <drm/drm_gem_dma_helper.h>
>  #include <drm/drm_gem_framebuffer_helper.h>
> @@ -38,21 +41,70 @@ static const struct drm_mode_config_helper_funcs lcdif_mode_config_helpers = {
>  	.atomic_commit_tail = drm_atomic_helper_commit_tail_rpm,
>  };
>  
> +static const struct drm_encoder_funcs lcdif_encoder_funcs = {
> +	.destroy = drm_encoder_cleanup,
> +};
> +
>  static int lcdif_attach_bridge(struct lcdif_drm_private *lcdif)
>  {
> -	struct drm_device *drm = lcdif->drm;
> +	struct device *dev = lcdif->drm->dev;
> +	struct device_node *ep;
>  	struct drm_bridge *bridge;
>  	int ret;
>  
> -	bridge = devm_drm_of_get_bridge(drm->dev, drm->dev->of_node, 0, 0);
> -	if (IS_ERR(bridge))
> -		return PTR_ERR(bridge);
> -
> -	ret = drm_bridge_attach(&lcdif->encoder, bridge, NULL, 0);
> -	if (ret)
> -		return dev_err_probe(drm->dev, ret, "Failed to attach bridge\n");
> -
> -	lcdif->bridge = bridge;
> +	for_each_endpoint_of_node(dev->of_node, ep) {
> +		struct device_node *remote;
> +		struct of_endpoint of_ep;
> +		struct drm_encoder *encoder;
> +
> +		remote = of_graph_get_remote_port_parent(ep);
> +		if (!remote || !of_device_is_available(remote)) {
'!remote ||' is redundant, since of_device_is_available already checks
for a NULL pointer.

[...]

> diff --git a/drivers/gpu/drm/mxsfb/lcdif_kms.c b/drivers/gpu/drm/mxsfb/lcdif_kms.c
> index 262bc43b1079..ba36447ed900 100644
> --- a/drivers/gpu/drm/mxsfb/lcdif_kms.c
> +++ b/drivers/gpu/drm/mxsfb/lcdif_kms.c
[...]
> @@ -529,6 +580,46 @@ static void lcdif_crtc_atomic_disable(struct drm_crtc *crtc,
>  	pm_runtime_put_sync(drm->dev);
>  }
>  
> +static void lcdif_crtc_reset(struct drm_crtc *crtc)
> +{
> +	struct lcdif_crtc_state *state;
> +
> +	if (crtc->state)
> +		__drm_atomic_helper_crtc_destroy_state(crtc->state);
> +
> +	kfree(to_lcdif_crtc_state(crtc->state));
>
If crtc-state can be NULL at this point, this will only work as long as
'base' is the first member of the lcdif_crtc_state struct (which
currently is the case, but there is no guarantee that this will always
be this way), otherwise the if clause above is not needed.



Lothar Waßmann


More information about the dri-devel mailing list