[PATCH V2 2/3] drm/panel: st7703: Rename CMD_UNKNOWN_C6 to CMD_SETECO

[Chris Morgan]

From: Chris Morgan <macromorgan at hotmail.com>

A later revision of the datasheet for the ST7703 refers to this command
as "SETECO".

Signed-off-by: Chris Morgan <macromorgan at hotmail.com>
Reviewed-by: Guido Günther <agx at sigxcpu.org>
---
 drivers/gpu/drm/panel/panel-sitronix-st7703.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7703.c b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
index 86a472b01360..27049a1d9b3e 100644
--- a/drivers/gpu/drm/panel/panel-sitronix-st7703.c
+++ b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
@@ -41,8 +41,8 @@
 #define ST7703_CMD_UNKNOWN_BF	 0xBF
 #define ST7703_CMD_SETSCR	 0xC0
 #define ST7703_CMD_SETPOWER	 0xC1
+#define ST7703_CMD_SETECO	 0xC6
 #define ST7703_CMD_SETPANEL	 0xCC
-#define ST7703_CMD_UNKNOWN_C6	 0xC6
 #define ST7703_CMD_SETGAMMA	 0xE0
 #define ST7703_CMD_SETEQ	 0xE3
 #define ST7703_CMD_SETGIP1	 0xE9
@@ -266,8 +266,7 @@ static int xbd599_init_sequence(struct st7703 *ctx)
 				 * ESD_DET_TIME_SEL = 0 frames
 				 */);
 
-	/* Undocumented command. */
-	dsi_dcs_write_seq(dsi, ST7703_CMD_UNKNOWN_C6, 0x01, 0x00, 0xFF, 0xFF, 0x00);
+	dsi_dcs_write_seq(dsi, ST7703_CMD_SETECO, 0x01, 0x00, 0xFF, 0xFF, 0x00);
 
 	dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER,
 			  0x74, /* VBTHS, VBTLS: VGH = 17V, VBL = -11V */
-- 
2.34.1