[PATCH] drm/msm/dpu: fix sm8450 CTL configuration

[Abhinav Kumar]

On 1/23/2023 12:08 AM, Dmitry Baryshkov wrote:
> Correct the CTL size on sm8450 platform. This fixes the incorrect merge
> of sm8350 support, which unfortunately also touched the SM8450 setup.
> 
> Fixes: 0e91bcbb0016 ("drm/msm/dpu: Add SM8350 to hw catalog")
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>

Matches the vendor DT size for sm8450, hence

Reviewed-by: Abhinav Kumar <quic_abhinavk at quicinc.com>

> ---
>   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 10 +++++-----
>   1 file changed, 5 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> index 63a0fa3b0a17..9060dce51e2e 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> @@ -1017,31 +1017,31 @@ static const struct dpu_ctl_cfg sm8450_ctl[] = {
>   	},
>   	{
>   	.name = "ctl_1", .id = CTL_1,
> -	.base = 0x16000, .len = 0x1e8,
> +	.base = 0x16000, .len = 0x204,
>   	.features = BIT(DPU_CTL_SPLIT_DISPLAY) | CTL_SC7280_MASK,
>   	.intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 10),
>   	},
>   	{
>   	.name = "ctl_2", .id = CTL_2,
> -	.base = 0x17000, .len = 0x1e8,
> +	.base = 0x17000, .len = 0x204,
>   	.features = CTL_SC7280_MASK,
>   	.intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 11),
>   	},
>   	{
>   	.name = "ctl_3", .id = CTL_3,
> -	.base = 0x18000, .len = 0x1e8,
> +	.base = 0x18000, .len = 0x204,
>   	.features = CTL_SC7280_MASK,
>   	.intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 12),
>   	},
>   	{
>   	.name = "ctl_4", .id = CTL_4,
> -	.base = 0x19000, .len = 0x1e8,
> +	.base = 0x19000, .len = 0x204,
>   	.features = CTL_SC7280_MASK,
>   	.intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 13),
>   	},
>   	{
>   	.name = "ctl_5", .id = CTL_5,
> -	.base = 0x1a000, .len = 0x1e8,
> +	.base = 0x1a000, .len = 0x204,
>   	.features = CTL_SC7280_MASK,
>   	.intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 23),
>   	},