[PATCH v3 2/2] drm/probe_helper: sort out poll_running vs poll_enabled
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Tue Jan 24 10:45:48 UTC 2023
There are two flags attemting to guard connector polling:
poll_enabled and poll_running. While poll_enabled semantics is clearly
defined and fully adhered (mark that drm_kms_helper_poll_init() was
called and not finalized by the _fini() call), the poll_running flag
doesn't have such clearliness.
This flag is used only in drm_helper_probe_single_connector_modes() to
guard calling of drm_kms_helper_poll_enable, it doesn't guard the
drm_kms_helper_poll_fini(), etc. Change it to only be set if the polling
is actually running. Tie HPD enablement to this flag.
This fixes the following warning reported after merging the HPD series:
Hot plug detection already enabled
WARNING: CPU: 2 PID: 9 at drivers/gpu/drm/drm_bridge.c:1257 drm_bridge_hpd_enable+0x94/0x9c [drm]
Modules linked in: videobuf2_memops snd_soc_simple_card snd_soc_simple_card_utils fsl_imx8_ddr_perf videobuf2_common snd_soc_imx_spdif adv7511 etnaviv imx8m_ddrc imx_dcss mc cec nwl_dsi gov
CPU: 2 PID: 9 Comm: kworker/u8:0 Not tainted 6.2.0-rc2-15208-g25b283acd578 #6
Hardware name: NXP i.MX8MQ EVK (DT)
Workqueue: events_unbound deferred_probe_work_func
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : drm_bridge_hpd_enable+0x94/0x9c [drm]
lr : drm_bridge_hpd_enable+0x94/0x9c [drm]
sp : ffff800009ef3740
x29: ffff800009ef3740 x28: ffff000009331f00 x27: 0000000000001000
x26: 0000000000000020 x25: ffff800001148ed8 x24: ffff00000a8fe000
x23: 00000000fffffffd x22: ffff000005086348 x21: ffff800001133ee0
x20: ffff00000550d800 x19: ffff000005086288 x18: 0000000000000006
x17: 0000000000000000 x16: ffff8000096ef008 x15: 97ffff2891004260
x14: 2a1403e194000000 x13: 97ffff2891004260 x12: 2a1403e194000000
x11: 7100385f29400801 x10: 0000000000000aa0 x9 : ffff800008112744
x8 : ffff000000250b00 x7 : 0000000000000003 x6 : 0000000000000011
x5 : 0000000000000000 x4 : ffff0000bd986a48 x3 : 0000000000000001
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000000250000
Call trace:
drm_bridge_hpd_enable+0x94/0x9c [drm]
drm_bridge_connector_enable_hpd+0x2c/0x3c [drm_kms_helper]
drm_kms_helper_poll_enable+0x94/0x10c [drm_kms_helper]
drm_helper_probe_single_connector_modes+0x1a8/0x510 [drm_kms_helper]
drm_client_modeset_probe+0x204/0x1190 [drm]
__drm_fb_helper_initial_config_and_unlock+0x5c/0x4a4 [drm_kms_helper]
drm_fb_helper_initial_config+0x54/0x6c [drm_kms_helper]
drm_fbdev_client_hotplug+0xd0/0x140 [drm_kms_helper]
drm_fbdev_generic_setup+0x90/0x154 [drm_kms_helper]
dcss_kms_attach+0x1c8/0x254 [imx_dcss]
dcss_drv_platform_probe+0x90/0xfc [imx_dcss]
platform_probe+0x70/0xcc
really_probe+0xc4/0x2e0
__driver_probe_device+0x80/0xf0
driver_probe_device+0xe0/0x164
__device_attach_driver+0xc0/0x13c
bus_for_each_drv+0x84/0xe0
__device_attach+0xa4/0x1a0
device_initial_probe+0x1c/0x30
bus_probe_device+0xa4/0xb0
deferred_probe_work_func+0x90/0xd0
process_one_work+0x200/0x474
worker_thread+0x74/0x43c
kthread+0xfc/0x110
ret_from_fork+0x10/0x20
---[ end trace 0000000000000000 ]---
Reported-by: Laurentiu Palcu <laurentiu.palcu at oss.nxp.com>
Fixes: c8268795c9a9 ("drm/probe-helper: enable and disable HPD on connectors")
Tested-by: Marek Szyprowski <m.szyprowski at samsung.com>
Tested-by: Chen-Yu Tsai <wenst at chromium.org>
Acked-by: Laurentiu Palcu <laurentiu.palcu at oss.nxp.com>
Tested-by: Laurentiu Palcu <laurentiu.palcu at oss.nxp.com>
Tested-by: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
drivers/gpu/drm/drm_probe_helper.c | 42 +++++++++++++++---------------
1 file changed, 21 insertions(+), 21 deletions(-)
diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c
index ab787d71fa66..8127be134c39 100644
--- a/drivers/gpu/drm/drm_probe_helper.c
+++ b/drivers/gpu/drm/drm_probe_helper.c
@@ -282,7 +282,8 @@ void drm_kms_helper_poll_enable(struct drm_device *dev)
bool poll = false;
unsigned long delay = DRM_OUTPUT_POLL_PERIOD;
- if (!dev->mode_config.poll_enabled || !drm_kms_helper_poll)
+ if (!dev->mode_config.poll_enabled || !drm_kms_helper_poll ||
+ dev->mode_config.poll_running)
return;
poll = drm_kms_helper_enable_hpd(dev);
@@ -304,6 +305,8 @@ void drm_kms_helper_poll_enable(struct drm_device *dev)
if (poll)
schedule_delayed_work(&dev->mode_config.output_poll_work, delay);
+
+ dev->mode_config.poll_running = true;
}
EXPORT_SYMBOL(drm_kms_helper_poll_enable);
@@ -592,10 +595,7 @@ int drm_helper_probe_single_connector_modes(struct drm_connector *connector,
}
/* Re-enable polling in case the global poll config changed. */
- if (drm_kms_helper_poll != dev->mode_config.poll_running)
- drm_kms_helper_poll_enable(dev);
-
- dev->mode_config.poll_running = drm_kms_helper_poll;
+ drm_kms_helper_poll_enable(dev);
if (connector->status == connector_status_disconnected) {
DRM_DEBUG_KMS("[CONNECTOR:%d:%s] disconnected\n",
@@ -735,8 +735,11 @@ static void output_poll_execute(struct work_struct *work)
changed = dev->mode_config.delayed_event;
dev->mode_config.delayed_event = false;
- if (!drm_kms_helper_poll)
+ if (!drm_kms_helper_poll && dev->mode_config.poll_running) {
+ drm_kms_helper_disable_hpd(dev);
+ dev->mode_config.poll_running = false;
goto out;
+ }
if (!mutex_trylock(&dev->mode_config.mutex)) {
repoll = true;
@@ -833,19 +836,6 @@ bool drm_kms_helper_is_poll_worker(void)
}
EXPORT_SYMBOL(drm_kms_helper_is_poll_worker);
-static void drm_kms_helper_poll_disable_fini(struct drm_device *dev, bool fini)
-{
- if (!dev->mode_config.poll_enabled)
- return;
-
- if (fini)
- dev->mode_config.poll_enabled = false;
-
- drm_kms_helper_disable_hpd(dev);
-
- cancel_delayed_work_sync(&dev->mode_config.output_poll_work);
-}
-
/**
* drm_kms_helper_poll_disable - disable output polling
* @dev: drm_device
@@ -862,7 +852,12 @@ static void drm_kms_helper_poll_disable_fini(struct drm_device *dev, bool fini)
*/
void drm_kms_helper_poll_disable(struct drm_device *dev)
{
- drm_kms_helper_poll_disable_fini(dev, false);
+ if (dev->mode_config.poll_running)
+ drm_kms_helper_disable_hpd(dev);
+
+ cancel_delayed_work_sync(&dev->mode_config.output_poll_work);
+
+ dev->mode_config.poll_running = false;
}
EXPORT_SYMBOL(drm_kms_helper_poll_disable);
@@ -900,7 +895,12 @@ EXPORT_SYMBOL(drm_kms_helper_poll_init);
*/
void drm_kms_helper_poll_fini(struct drm_device *dev)
{
- drm_kms_helper_poll_disable_fini(dev, true);
+ if (!dev->mode_config.poll_enabled)
+ return;
+
+ drm_kms_helper_poll_disable(dev);
+
+ dev->mode_config.poll_enabled = false;
}
EXPORT_SYMBOL(drm_kms_helper_poll_fini);
--
2.39.0
More information about the dri-devel
mailing list