linux-6.2-rc4+ hangs on poweroff/reboot: Bisected
Ben Skeggs
skeggsb at gmail.com
Mon Jan 30 01:09:27 UTC 2023
On Sat, 28 Jan 2023 at 21:29, Chris Clayton <chris2553 at googlemail.com> wrote:
>
>
>
> On 28/01/2023 05:42, Linux kernel regression tracking (Thorsten Leemhuis) wrote:
> > On 27.01.23 20:46, Chris Clayton wrote:
> >> [Resend because the mail client on my phone decided to turn HTML on behind my back, so my reply got bounced.]
> >>
> >> Thanks Thorsten.
> >>
> >> I did try to revert but it didnt revert cleanly and I don't have the knowledge to fix it up.
> >>
> >> The patch was part of a merge that included a number of related patches. Tomorrow, I'll try to revert the lot and report
> >> back.
> >
> > You are free to do so, but there is no need for that from my side. I
> > only wanted to know if a simple revert would do the trick; if it
> > doesn't, it in my experience often is best to leave things to the
> > developers of the code in question,
>
> Sound advice, Thorsten. Way to many conflicts for me to resolve.
Hey,
This is a complete shot-in-the-dark, as I don't see this behaviour on
*any* of my boards. Could you try the attached patch please?
Thanks,
Ben.
>
> as they know it best and thus have a
> > better idea which hidden side effect a more complex revert might have.
> >
> > Ciao, Thorsten
> >
> >> On 27/01/2023 11:20, Linux kernel regression tracking (Thorsten Leemhuis) wrote:
> >>> Hi, this is your Linux kernel regression tracker. Top-posting for once,
> >>> to make this easily accessible to everyone.
> >>>
> >>> @nouveau-maintainers, did anyone take a look at this? The report is
> >>> already 8 days old and I don't see a single reply. Sure, we'll likely
> >>> get a -rc8, but still it would be good to not fix this on the finish line.
> >>>
> >>> Chris, btw, did you try if you can revert the commit on top of latest
> >>> mainline? And if so, does it fix the problem?
> >>>
> >>> Ciao, Thorsten (wearing his 'the Linux kernel's regression tracker' hat)
> >>> --
> >>> Everything you wanna know about Linux kernel regression tracking:
> >>> https://linux-regtracking.leemhuis.info/about/#tldr
> >>> If I did something stupid, please tell me, as explained on that page.
> >>>
> >>> #regzbot poke
> >>>
> >>> On 19.01.23 15:33, Linux kernel regression tracking (Thorsten Leemhuis)
> >>> wrote:
> >>>> [adding various lists and the two other nouveau maintainers to the list
> >>>> of recipients]
> >>>
> >>>> On 18.01.23 21:59, Chris Clayton wrote:
> >>>>> Hi.
> >>>>>
> >>>>> I build and installed the lastest development kernel earlier this week. I've found that when I try the laptop down (or
> >>>>> reboot it), it hangs right at the end of closing the current session. The last line I see on the screen when rebooting is:
> >>>>>
> >>>>> sd 4:0:0:0: [sda] Synchronising SCSI cache
> >>>>>
> >>>>> when closing down I see one additional line:
> >>>>>
> >>>>> sd 4:0:0:0 [sda]Stopping disk
> >>>>>
> >>>>> In both cases the machine then hangs and I have to hold down the power button fot a few seconds to switch it off.
> >>>>>
> >>>>> Linux 6.1 is OK but 6.2-rc1 hangs, so I bisected between this two and landed on:
> >>>>>
> >>>>> # first bad commit: [0e44c21708761977dcbea9b846b51a6fb684907a] drm/nouveau/flcn: new code to load+boot simple HS FWs
> >>>>> (VPR scrubber)
> >>>>>
> >>>>> I built and installed a kernel with f15cde64b66161bfa74fb58f4e5697d8265b802e (the parent of the bad commit) checked out
> >>>>> and that shuts down and reboots fine. It the did the same with the bad commit checked out and that does indeed hang, so
> >>>>> I'm confident the bisect outcome is OK.
> >>>>>
> >>>>> Kernels 6.1.6 and 5.15.88 are also OK.
> >>>>>
> >>>>> My system had dual GPUs - one intel and one NVidia. Related extracts from 'lscpi -v' is:
> >>>>>
> >>>>> 00:02.0 VGA compatible controller: Intel Corporation CometLake-H GT2 [UHD Graphics] (rev 05) (prog-if 00 [VGA controller])
> >>>>> Subsystem: CLEVO/KAPOK Computer CometLake-H GT2 [UHD Graphics]
> >>>>>
> >>>>> Flags: bus master, fast devsel, latency 0, IRQ 142
> >>>>>
> >>>>> Memory at c2000000 (64-bit, non-prefetchable) [size=16M]
> >>>>>
> >>>>> Memory at a0000000 (64-bit, prefetchable) [size=256M]
> >>>>>
> >>>>> I/O ports at 5000 [size=64]
> >>>>>
> >>>>> Expansion ROM at 000c0000 [virtual] [disabled] [size=128K]
> >>>>>
> >>>>> Capabilities: [40] Vendor Specific Information: Len=0c <?>
> >>>>>
> >>>>> Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
> >>>>>
> >>>>> Capabilities: [ac] MSI: Enable+ Count=1/1 Maskable- 64bit-
> >>>>>
> >>>>> Capabilities: [d0] Power Management version 2
> >>>>>
> >>>>> Kernel driver in use: i915
> >>>>>
> >>>>> Kernel modules: i915
> >>>>>
> >>>>>
> >>>>> 01:00.0 VGA compatible controller: NVIDIA Corporation TU117M [GeForce GTX 1650 Ti Mobile] (rev a1) (prog-if 00 [VGA
> >>>>> controller])
> >>>>> Subsystem: CLEVO/KAPOK Computer TU117M [GeForce GTX 1650 Ti Mobile]
> >>>>> Flags: bus master, fast devsel, latency 0, IRQ 141
> >>>>> Memory at c4000000 (32-bit, non-prefetchable) [size=16M]
> >>>>> Memory at b0000000 (64-bit, prefetchable) [size=256M]
> >>>>> Memory at c0000000 (64-bit, prefetchable) [size=32M]
> >>>>> I/O ports at 4000 [size=128]
> >>>>> Expansion ROM at c3000000 [disabled] [size=512K]
> >>>>> Capabilities: [60] Power Management version 3
> >>>>> Capabilities: [68] MSI: Enable+ Count=1/1 Maskable- 64bit+
> >>>>> Capabilities: [78] Express Legacy Endpoint, MSI 00
> >>>>> Kernel driver in use: nouveau
> >>>>> Kernel modules: nouveau
> >>>>>
> >>>>> DRI_PRIME=1 is exported in one of my init scripts (yes, I am still using sysvinit).
> >>>>>
> >>>>> I've attached the bisect.log, but please let me know if I can provide any other diagnostics. Please cc me as I'm not
> >>>>> subscribed.
> >>>>
> >>>> Thanks for the report. To be sure the issue doesn't fall through the
> >>>> cracks unnoticed, I'm adding it to regzbot, the Linux kernel regression
> >>>> tracking bot:
> >>>>
> >>>> #regzbot ^introduced e44c2170876197
> >>>> #regzbot title drm: nouveau: hangs on poweroff/reboot
> >>>> #regzbot ignore-activity
> >>>>
> >>>> This isn't a regression? This issue or a fix for it are already
> >>>> discussed somewhere else? It was fixed already? You want to clarify when
> >>>> the regression started to happen? Or point out I got the title or
> >>>> something else totally wrong? Then just reply and tell me -- ideally
> >>>> while also telling regzbot about it, as explained by the page listed in
> >>>> the footer of this mail.
> >>>>
> >>>> Developers: When fixing the issue, remember to add 'Link:' tags pointing
> >>>> to the report (the parent of this mail). See page linked in footer for
> >>>> details.
> >>>>
> >>>> Ciao, Thorsten (wearing his 'the Linux kernel's regression tracker' hat)
> >>>> --
> >>>> Everything you wanna know about Linux kernel regression tracking:
> >>>> https://linux-regtracking.leemhuis.info/about/#tldr
> >>>> That page also explains what to do if mails like this annoy you.
> >>
> >>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: nvdec0-reset.diff
Type: text/x-patch
Size: 849 bytes
Desc: not available
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20230130/a52ad70d/attachment.bin>
More information about the dri-devel
mailing list