[PATCH v12 00/18] drm: Add Samsung MIPI DSIM bridge

[Rasmus Villemoes]

On 27/01/2023 12.30, Marek Vasut wrote:
> On 1/27/23 12:04, Jagan Teki wrote:

>>> Thanks, but that's exactly what I'm doing, and I don't see any
>>> modification of imx8mp.dtsi in that branch. I'm basically looking for
>>> help to do the equivalent of
>>>
>>>    88775338cd58 - arm64: dts: imx8mm: Add MIPI DSI pipeline
>>>    f964f67dd6ee - arm64: dts: imx8mm: Add eLCDIF node support
>>>
>>> for imx8mp in order to test those patches on our boards (we have two
>>> variants).
>>
>> Marek, any help here, thanks.
> 
> Try attached patch.

Thanks. I removed the lcdif2 and ldb nodes I had added from Alexander's
patch (94e6197dadc9 in linux-next) in order to apply it. I get a couple
of errors during boot:

  clk: /soc at 0/bus at 32c00000/mipi_dsi at 32e60000: failed to reparent
media_apb to sys_pll1_266m: -22

and enabling a pr_debug in clk_core_set_parent_nolock() shows that this
is because

  clk_core_set_parent_nolock: clk sys_pll1_266m can not be parent of clk
media_apb

Further, the mipi_dsi fails to probe due to

  /soc at 0/bus at 32c00000/mipi_dsi at 32e60000: failed to get
'samsung,burst-clock-frequency' property

All other .dtsi files seem to have those samsung,burst-clock-frequency
and samsung,esc-clock-frequency properties, so I suppose those should
also go into the imx8mp.dtsi and are not something that the board .dts
file should supply(?).


[There's also some differences between your patch and Alexander's
regarding the lcdif2 and ldb nodes, so while my lvds display still sorta
works, I get

  fsl-ldb 32ec0000.blk-ctrl:lvds-ldb: Configured LDB clock (297000000
Hz) does not match requested LVDS clock: 346500000 Hz

and the image is oddly distorted/shifted. But I suppose that's
orthogonal to getting the lcdif1 -> mipi-dsi -> ... pipeline working.]

Rasmus