[PATCH v2 05/14] drm/msm/dpu: handle perf mode in _dpu_core_perf_crtc_update_bus()
Abhinav Kumar
quic_abhinavk at quicinc.com
Tue Jul 4 15:55:31 UTC 2023
On 7/4/2023 8:03 AM, Dmitry Baryshkov wrote:
> Move perf mode handling for the bandwidth to
> _dpu_core_perf_crtc_update_bus() rather than overriding per-CRTC data
> and then aggregating known values.
>
> Note, this changes the fix_core_ab_vote. Previously it would be
> multiplied per the CRTC number, now it will be used directly for
> interconnect voting.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
Break this out into a separate series. This rework doesnt need to be
part of this cleanup series.
> ---
> drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c | 37 +++++++++----------
> 1 file changed, 18 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
> index 348550ac7e51..42c03a5f1f3e 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
> @@ -116,21 +116,9 @@ static void _dpu_core_perf_calc_crtc(struct dpu_kms *kms,
> return;
> }
>
> - memset(perf, 0, sizeof(struct dpu_core_perf_params));
> -
> - if (kms->perf.perf_tune.mode == DPU_PERF_MODE_MINIMUM) {
> - perf->bw_ctl = 0;
> - perf->max_per_pipe_ib = 0;
> - perf->core_clk_rate = 0;
> - } else if (kms->perf.perf_tune.mode == DPU_PERF_MODE_FIXED) {
> - perf->bw_ctl = kms->perf.fix_core_ab_vote;
> - perf->max_per_pipe_ib = kms->perf.fix_core_ib_vote;
> - perf->core_clk_rate = kms->perf.fix_core_clk_rate;
> - } else {
> - perf->bw_ctl = _dpu_core_perf_calc_bw(kms, crtc);
> - perf->max_per_pipe_ib = kms->catalog->perf->min_dram_ib;
> - perf->core_clk_rate = _dpu_core_perf_calc_clk(kms, crtc, state);
> - }
> + perf->bw_ctl = _dpu_core_perf_calc_bw(kms, crtc);
> + perf->max_per_pipe_ib = kms->catalog->perf->min_dram_ib;
> + perf->core_clk_rate = _dpu_core_perf_calc_clk(kms, crtc, state);
>
> DRM_DEBUG_ATOMIC(
> "crtc=%d clk_rate=%llu core_ib=%llu core_ab=%llu\n",
> @@ -236,17 +224,28 @@ static int _dpu_core_perf_crtc_update_bus(struct dpu_kms *kms,
> struct dpu_core_perf_params perf = { 0 };
> int i, ret = 0;
> u32 avg_bw;
> + u32 peak_bw;
>
> if (!kms->num_paths)
> return 0;
>
> - dpu_core_perf_aggregate(crtc->dev, dpu_crtc_get_client_type(crtc), &perf);
> + if (kms->perf.perf_tune.mode == DPU_PERF_MODE_MINIMUM) {
> + avg_bw = 0;
> + peak_bw = 0;
> + } else if (kms->perf.perf_tune.mode == DPU_PERF_MODE_FIXED) {
> + avg_bw = kms->perf.fix_core_ab_vote;
> + peak_bw = kms->perf.fix_core_ib_vote;
> + } else {
> + dpu_core_perf_aggregate(crtc->dev, dpu_crtc_get_client_type(crtc), &perf);
> +
> + avg_bw = div_u64(perf.bw_ctl, 1000); /*Bps_to_icc*/
> + peak_bw = perf.max_per_pipe_ib;
> + }
>
> - avg_bw = perf.bw_ctl;
> - do_div(avg_bw, (kms->num_paths * 1000)); /*Bps_to_icc*/
> + avg_bw /= kms->num_paths;
>
> for (i = 0; i < kms->num_paths; i++)
> - icc_set_bw(kms->path[i], avg_bw, perf.max_per_pipe_ib);
> + icc_set_bw(kms->path[i], avg_bw, peak_bw);
>
> return ret;
> }
More information about the dri-devel
mailing list