[PATCH 3/4] dummycon: limit Arm console size hack to footbridge

[Javier Martinez Canillas]

Arnd Bergmann <arnd at kernel.org> writes:

> From: Arnd Bergmann <arnd at arndb.de>
>
> The dummycon default console size used to be determined by architecture,
> but now this is a Kconfig setting on everything except ARM. Tracing this
> back in the historic git trees, this was used to match the size of VGA
> console or VGA framebuffer on early machines, but nowadays that code is
> no longer used, except probably on the old footbridge/netwinder since
> that is the only one that supports vgacon.
>
> On machines with a framebuffer, booting with DT so far results in always
> using the hardcoded 80x30 size in dummycon, while on ATAGS the setting
> can come from a bootloader specific override. Both seem to be worse
> choices than the Kconfig setting, since the actual text size for fbcon
> also depends on the selected font.
>
> Make this work the same way as everywhere else and use the normal
> Kconfig setting, except for the footbridge with vgacon, which keeps
> using the traditional code. If vgacon is disabled, footbridge can
> also ignore the setting. This means the screen_info only has to be
> provided when either vgacon or EFI are enabled now.
>
> To limit the amount of surprises on Arm, change the Kconfig default
> to the previously used 80x30 setting instead of the usual 80x25.
>
> Signed-off-by: Arnd Bergmann <arnd at arndb.de>
> ---

Reviewed-by: Javier Martinez Canillas <javierm at redhat.com>

-- 
Best regards,

Javier Martinez Canillas
Core Platforms
Red Hat