[PATCH 11/17] drm/msm/mdp4: use bulk regulators API for LCDC encoder
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Sat Jul 8 01:04:01 UTC 2023
Switch mdp4_lcdc_encoder to using regulator_bulk_* API instead of
enumerating regulators by hand.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
.../gpu/drm/msm/disp/mdp4/mdp4_lcdc_encoder.c | 51 ++++++-------------
1 file changed, 15 insertions(+), 36 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/mdp4/mdp4_lcdc_encoder.c b/drivers/gpu/drm/msm/disp/mdp4/mdp4_lcdc_encoder.c
index 10eb3e5b218e..67c118bb30ca 100644
--- a/drivers/gpu/drm/msm/disp/mdp4/mdp4_lcdc_encoder.c
+++ b/drivers/gpu/drm/msm/disp/mdp4/mdp4_lcdc_encoder.c
@@ -18,7 +18,7 @@ struct mdp4_lcdc_encoder {
struct drm_panel *panel;
struct clk *lcdc_clk;
unsigned long int pixclock;
- struct regulator *regs[3];
+ struct regulator_bulk_data regs[3];
bool enabled;
uint32_t bsc;
};
@@ -271,12 +271,10 @@ static void mdp4_lcdc_encoder_mode_set(struct drm_encoder *encoder,
static void mdp4_lcdc_encoder_disable(struct drm_encoder *encoder)
{
- struct drm_device *dev = encoder->dev;
struct mdp4_lcdc_encoder *mdp4_lcdc_encoder =
to_mdp4_lcdc_encoder(encoder);
struct mdp4_kms *mdp4_kms = get_kms(encoder);
struct drm_panel *panel;
- int i, ret;
if (WARN_ON(!mdp4_lcdc_encoder->enabled))
return;
@@ -301,11 +299,8 @@ static void mdp4_lcdc_encoder_disable(struct drm_encoder *encoder)
clk_disable_unprepare(mdp4_lcdc_encoder->lcdc_clk);
- for (i = 0; i < ARRAY_SIZE(mdp4_lcdc_encoder->regs); i++) {
- ret = regulator_disable(mdp4_lcdc_encoder->regs[i]);
- if (ret)
- DRM_DEV_ERROR(dev->dev, "failed to disable regulator: %d\n", ret);
- }
+ regulator_bulk_disable(ARRAY_SIZE(mdp4_lcdc_encoder->regs),
+ mdp4_lcdc_encoder->regs);
mdp4_lcdc_encoder->enabled = false;
}
@@ -319,7 +314,7 @@ static void mdp4_lcdc_encoder_enable(struct drm_encoder *encoder)
struct mdp4_kms *mdp4_kms = get_kms(encoder);
struct drm_panel *panel;
uint32_t config;
- int i, ret;
+ int ret;
if (WARN_ON(mdp4_lcdc_encoder->enabled))
return;
@@ -339,11 +334,10 @@ static void mdp4_lcdc_encoder_enable(struct drm_encoder *encoder)
mdp4_crtc_set_config(encoder->crtc, config);
mdp4_crtc_set_intf(encoder->crtc, INTF_LCDC_DTV, 0);
- for (i = 0; i < ARRAY_SIZE(mdp4_lcdc_encoder->regs); i++) {
- ret = regulator_enable(mdp4_lcdc_encoder->regs[i]);
- if (ret)
- DRM_DEV_ERROR(dev->dev, "failed to enable regulator: %d\n", ret);
- }
+ ret = regulator_bulk_enable(ARRAY_SIZE(mdp4_lcdc_encoder->regs),
+ mdp4_lcdc_encoder->regs);
+ if (ret)
+ DRM_DEV_ERROR(dev->dev, "failed to enable regulators: %d\n", ret);
DBG("setting lcdc_clk=%lu", pc);
ret = clk_set_rate(mdp4_lcdc_encoder->lcdc_clk, pc);
@@ -385,7 +379,6 @@ struct drm_encoder *mdp4_lcdc_encoder_init(struct drm_device *dev,
{
struct drm_encoder *encoder = NULL;
struct mdp4_lcdc_encoder *mdp4_lcdc_encoder;
- struct regulator *reg;
int ret;
mdp4_lcdc_encoder = kzalloc(sizeof(*mdp4_lcdc_encoder), GFP_KERNEL);
@@ -411,29 +404,15 @@ struct drm_encoder *mdp4_lcdc_encoder_init(struct drm_device *dev,
}
/* TODO: different regulators in other cases? */
- reg = devm_regulator_get(dev->dev, "lvds-vccs-3p3v");
- if (IS_ERR(reg)) {
- ret = PTR_ERR(reg);
- DRM_DEV_ERROR(dev->dev, "failed to get lvds-vccs-3p3v: %d\n", ret);
- goto fail;
- }
- mdp4_lcdc_encoder->regs[0] = reg;
-
- reg = devm_regulator_get(dev->dev, "lvds-pll-vdda");
- if (IS_ERR(reg)) {
- ret = PTR_ERR(reg);
- DRM_DEV_ERROR(dev->dev, "failed to get lvds-pll-vdda: %d\n", ret);
- goto fail;
- }
- mdp4_lcdc_encoder->regs[1] = reg;
+ mdp4_lcdc_encoder->regs[0].supply = "lvds-vccs-3p3v";
+ mdp4_lcdc_encoder->regs[1].supply = "lvds-vccs-3p3v";
+ mdp4_lcdc_encoder->regs[2].supply = "lvds-vdda";
- reg = devm_regulator_get(dev->dev, "lvds-vdda");
- if (IS_ERR(reg)) {
- ret = PTR_ERR(reg);
- DRM_DEV_ERROR(dev->dev, "failed to get lvds-vdda: %d\n", ret);
+ ret = devm_regulator_bulk_get(dev->dev,
+ ARRAY_SIZE(mdp4_lcdc_encoder->regs),
+ mdp4_lcdc_encoder->regs);
+ if (ret)
goto fail;
- }
- mdp4_lcdc_encoder->regs[2] = reg;
return encoder;
--
2.39.2
More information about the dri-devel
mailing list