[PATCH] drm/panel: simple: Initialize unprepared_time in probe

[Sam Ravnborg]

Hi Marek.

On Sun, Jul 09, 2023 at 03:52:31PM +0200, Marek Vasut wrote:
> The unprepared_time has to be initialized during probe to probe time
> ktime, otherwise panel_simple_resume() panel_simple_wait() call may
> wait too short time, or no time at all, which would violate the panel
> timing specification. Initializing the unprepared_time() to probe time
> ktime assures the delay is at least what the panel requires from the
> time kernel started. The unprepared_time is then updated every time
> the panel is suspended in panel_simple_suspend() too.
> 
> Fixes: e5e30dfcf3db ("drm: panel: simple: Defer unprepare delay till next prepare to shorten it")
> Signed-off-by: Marek Vasut <marex at denx.de>

Looks OK,

Reviewed-by: Sam Ravnborg <sam at ravnborg.org>

It looks like prepared_time is not used anymore.
Could you dig a little into this while you are in the waiting area.

	Sam

> ---
> Cc: Daniel Vetter <daniel at ffwll.ch>
> Cc: David Airlie <airlied at gmail.com>
> Cc: Douglas Anderson <dianders at chromium.org>
> Cc: Neil Armstrong <neil.armstrong at linaro.org>
> Cc: Sam Ravnborg <sam at ravnborg.org>
> Cc: dri-devel at lists.freedesktop.org
> ---
>  drivers/gpu/drm/panel/panel-simple.c | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> index d3238088b7f80..37afed67fea7e 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -567,6 +567,7 @@ static int panel_simple_probe(struct device *dev, const struct panel_desc *desc)
>  
>  	panel->enabled = false;
>  	panel->prepared_time = 0;
> +	panel->unprepared_time = ktime_get_boottime();
>  	panel->desc = desc;
>  
>  	panel->supply = devm_regulator_get(dev, "power");
> -- 
> 2.40.1