[PATCH 01/12] accel/habanalabs/gaudi2: un-secure register for engine cores interrupt
Oded Gabbay
ogabbay at kernel.org
Tue Jul 11 11:12:15 UTC 2023
From: Tomer Tayar <ttayar at habana.ai>
The F/W dynamically allocates one of the PSOC scratchpad registers for
the engine cores, so they can raise events towards the F/W.
To allow the engine cores to access this register, this register must be
non-secured.
Signed-off-by: Tomer Tayar <ttayar at habana.ai>
Reviewed-by: Oded Gabbay <ogabbay at kernel.org>
Signed-off-by: Oded Gabbay <ogabbay at kernel.org>
---
.../accel/habanalabs/gaudi2/gaudi2_security.c | 20 ++++++++++++++++---
1 file changed, 17 insertions(+), 3 deletions(-)
diff --git a/drivers/accel/habanalabs/gaudi2/gaudi2_security.c b/drivers/accel/habanalabs/gaudi2/gaudi2_security.c
index 2742b1f801eb..d08267e59303 100644
--- a/drivers/accel/habanalabs/gaudi2/gaudi2_security.c
+++ b/drivers/accel/habanalabs/gaudi2/gaudi2_security.c
@@ -2907,7 +2907,7 @@ static void gaudi2_init_lbw_range_registers_secure(struct hl_device *hdev)
* - range 11: NIC11_CFG + *_DBG (not including TPC_DBG)
*
* If F/W security is not enabled:
- * - ranges 12,13: PSOC_CFG (excluding PSOC_TIMESTAMP)
+ * - ranges 12,13: PSOC_CFG (excluding PSOC_TIMESTAMP, PSOC_EFUSE and PSOC_GLOBAL_CONF)
*/
u64 lbw_range_min_short[] = {
mmNIC0_TX_AXUSER_BASE,
@@ -2923,7 +2923,7 @@ static void gaudi2_init_lbw_range_registers_secure(struct hl_device *hdev)
mmNIC10_TX_AXUSER_BASE,
mmNIC11_TX_AXUSER_BASE,
mmPSOC_I2C_M0_BASE,
- mmPSOC_EFUSE_BASE
+ mmPSOC_GPIO0_BASE
};
u64 lbw_range_max_short[] = {
mmNIC0_MAC_CH3_MAC_PCS_BASE + HL_BLOCK_SIZE,
@@ -3219,6 +3219,7 @@ static void gaudi2_init_range_registers(struct hl_device *hdev)
*/
static int gaudi2_init_protection_bits(struct hl_device *hdev)
{
+ u32 *user_regs_array = NULL, user_regs_array_size = 0, engine_core_intr_reg;
struct asic_fixed_properties *prop = &hdev->asic_prop;
u32 instance_offset;
int rc = 0;
@@ -3389,11 +3390,24 @@ static int gaudi2_init_protection_bits(struct hl_device *hdev)
/* PSOC.
* Except for PSOC_GLOBAL_CONF, skip when security is enabled in F/W, because the blocks are
* protected by privileged RR.
+ * For PSOC_GLOBAL_CONF, need to un-secure the scratchpad register which is used for engine
+ * cores to raise events towards F/W.
*/
+ engine_core_intr_reg = (u32) (hdev->asic_prop.engine_core_interrupt_reg_addr - CFG_BASE);
+ if (engine_core_intr_reg >= mmPSOC_GLOBAL_CONF_SCRATCHPAD_0 &&
+ engine_core_intr_reg <= mmPSOC_GLOBAL_CONF_SCRATCHPAD_31) {
+ user_regs_array = &engine_core_intr_reg;
+ user_regs_array_size = 1;
+ } else {
+ dev_err(hdev->dev,
+ "Engine cores register for interrupts (%#x) is not a PSOC scratchpad register\n",
+ engine_core_intr_reg);
+ }
+
rc |= hl_init_pb(hdev, HL_PB_SHARED, HL_PB_NA,
HL_PB_SINGLE_INSTANCE, HL_PB_NA,
gaudi2_pb_psoc_global_conf, ARRAY_SIZE(gaudi2_pb_psoc_global_conf),
- NULL, HL_PB_NA);
+ user_regs_array, user_regs_array_size);
if (!hdev->asic_prop.fw_security_enabled)
rc |= hl_init_pb(hdev, HL_PB_SHARED, HL_PB_NA,
--
2.34.1
More information about the dri-devel
mailing list