[PATCH 3/5] arm64: dts: qcom: qrb5165-rb5: add onboard USB-C redriver

[Konrad Dybcio]

On 9.07.2023 06:19, Dmitry Baryshkov wrote:
> Add the nb7vpq904m, onboard USB-C redriver / retimer.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> ---
[...]

> +			port at 1 {
> +				reg = <1>;
> +
> +				redriver_phy_con_ss: endpoint {
> +					remote-endpoint = <&usb_1_qmpphy_typec_mux_in>;
> +					data-lanes = <0 1 2 3>;
That's USB+DP lines combined, or how does it work? I'm confused :/

Konrad
> +				};
> +			};
> +
> +			port at 2 {
> +				reg = <2>;
> +
> +				redriver_usb_con_sbu: endpoint {
> +					remote-endpoint = <&pm8150b_typec_sbu_out>;
> +				};
> +			};
> +		};
> +	};
>  };
>  
>  &mdss {
> @@ -1294,7 +1334,7 @@ &usb_1_qmpphy {
>  };
>  
>  &usb_1_qmpphy_typec_mux_in {
> -	remote-endpoint = <&pm8150b_typec_mux_out>;
> +	remote-endpoint = <&redriver_phy_con_ss>;
>  };
>  
>  &usb_2 {
> @@ -1382,7 +1422,15 @@ pm8150b_role_switch_out: endpoint {
>  			port at 1 {
>  				reg = <1>;
>  				pm8150b_typec_mux_out: endpoint {
> -					remote-endpoint = <&usb_1_qmpphy_typec_mux_in>;
> +					remote-endpoint = <&redriver_usb_con_ss>;
> +				};
> +			};
> +
> +			port at 2 {
> +				reg = <2>;
> +
> +				pm8150b_typec_sbu_out: endpoint {
> +					remote-endpoint = <&redriver_usb_con_sbu>;
>  				};
>  			};
>  		};