[PATCH v4 17/17] arm64: dts: ti: k3-am62-main: Add GPU device node [DO NOT MERGE]

[Frank Binns]

Hi Krzysztof,

On Tue, 2023-07-18 at 08:19 +0200, Krzysztof Kozlowski wrote:
> On 14/07/2023 16:30, Sarah Walker wrote:
> > Add the Series AXE GPU node to the AM62 device tree.
> > 
> > Signed-off-by: Sarah Walker <sarah.walker at imgtec.com>
> > ---
> >  arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 13 +++++++++++++
> >  1 file changed, 13 insertions(+)
> > 
> > diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
> > index b3e4857bbbe4..ad13414acf18 100644
> > --- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
> > +++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
> > @@ -892,4 +892,17 @@ mcasp2: audio-controller at 2b20000 {
> >  		power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>;
> >  		status = "disabled";
> >  	};
> > +
> > +        gpu: gpu at fd00000 {
> > +                compatible = "ti,am62-gpu", "img,powervr-seriesaxe";
> > +                reg = <0 0x0fd00000 0 0x20000>;
> > +                power-domains = <&k3_pds 187 TI_SCI_PD_EXCLUSIVE>;
> > +                clocks = <&k3_clks 187 0>;
> > +                clock-names = "core";
> > +                interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
> > +                interrupt-names = "gpu";
> > +                #cooling-cells = <2>;
> > +                #cooling-min-level = <0>;
> > +                #cooling-max-level = <3>;
> 
> It does not look like you tested the DTS against bindings. Please run
> `make dtbs_check` (see
> Documentation/devicetree/bindings/writing-schema.rst or
> https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/
> for instructions).

Thank you for the tip. I'll have a read through.

Frank

> 
> Best regards,
> Krzysztof
>