[PATCH 06/19] drm/i915/display: Account for DSC not split case while computing cdclk

Lisovskiy, Stanislav stanislav.lisovskiy at intel.com
Thu Jul 20 09:16:08 UTC 2023


On Thu, Jul 13, 2023 at 04:03:33PM +0530, Ankit Nautiyal wrote:
> Currently we assume 2 Pixels Per Clock (PPC) while computing
> plane cdclk and min_cdlck. In cases where DSC single engine
> is used the throughput is 1 PPC.
> 
> So account for the above case, while computing cdclk.
> 
> v2: Use helper to get the adjusted pixel rate.
> 
> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal at intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_cdclk.c         |  2 +-
>  drivers/gpu/drm/i915/display/intel_vdsc.c          | 12 ++++++++++++
>  drivers/gpu/drm/i915/display/intel_vdsc.h          |  2 ++
>  drivers/gpu/drm/i915/display/skl_universal_plane.c |  4 ++--
>  4 files changed, 17 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_cdclk.c b/drivers/gpu/drm/i915/display/intel_cdclk.c
> index dcc1f6941b60..701909966545 100644
> --- a/drivers/gpu/drm/i915/display/intel_cdclk.c
> +++ b/drivers/gpu/drm/i915/display/intel_cdclk.c
> @@ -2508,7 +2508,7 @@ static int intel_pixel_rate_to_cdclk(const struct intel_crtc_state *crtc_state)
>  	int pixel_rate = crtc_state->pixel_rate;
>  
>  	if (DISPLAY_VER(dev_priv) >= 10)
> -		return DIV_ROUND_UP(pixel_rate, 2);
> +		return intel_dsc_get_adjusted_pixel_rate(crtc_state, pixel_rate);
>  	else if (DISPLAY_VER(dev_priv) == 9 ||
>  		 IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv))
>  		return pixel_rate;
> diff --git a/drivers/gpu/drm/i915/display/intel_vdsc.c b/drivers/gpu/drm/i915/display/intel_vdsc.c
> index 9d76c2756784..bbfdbf06da68 100644
> --- a/drivers/gpu/drm/i915/display/intel_vdsc.c
> +++ b/drivers/gpu/drm/i915/display/intel_vdsc.c
> @@ -1038,3 +1038,15 @@ void intel_dsc_get_config(struct intel_crtc_state *crtc_state)
>  out:
>  	intel_display_power_put(dev_priv, power_domain, wakeref);
>  }
> +
> +int intel_dsc_get_adjusted_pixel_rate(const struct intel_crtc_state *crtc_state, int pixel_rate)
> +{
> +	/*
> +	 * If single VDSC engine is used, it uses one pixel per clock
> +	 * otherwise we use two pixels per clock.
> +	 */
> +	if (crtc_state->dsc.compression_enable && !crtc_state->dsc.dsc_split)
> +		return pixel_rate;
> +
> +	return DIV_ROUND_UP(pixel_rate, 2);
> +}
> diff --git a/drivers/gpu/drm/i915/display/intel_vdsc.h b/drivers/gpu/drm/i915/display/intel_vdsc.h
> index 2cc41ff08909..3bb4b1980b6b 100644
> --- a/drivers/gpu/drm/i915/display/intel_vdsc.h
> +++ b/drivers/gpu/drm/i915/display/intel_vdsc.h
> @@ -28,4 +28,6 @@ void intel_dsc_dsi_pps_write(struct intel_encoder *encoder,
>  void intel_dsc_dp_pps_write(struct intel_encoder *encoder,
>  			    const struct intel_crtc_state *crtc_state);
>  
> +int intel_dsc_get_adjusted_pixel_rate(const struct intel_crtc_state *crtc_state, int pixel_rate);
> +
>  #endif /* __INTEL_VDSC_H__ */
> diff --git a/drivers/gpu/drm/i915/display/skl_universal_plane.c b/drivers/gpu/drm/i915/display/skl_universal_plane.c
> index 6b01a0b68b97..9eeb25ec4be9 100644
> --- a/drivers/gpu/drm/i915/display/skl_universal_plane.c
> +++ b/drivers/gpu/drm/i915/display/skl_universal_plane.c
> @@ -17,6 +17,7 @@
>  #include "intel_fb.h"
>  #include "intel_fbc.h"
>  #include "intel_psr.h"
> +#include "intel_vdsc.h"
>  #include "skl_scaler.h"
>  #include "skl_universal_plane.h"
>  #include "skl_watermark.h"
> @@ -263,8 +264,7 @@ static int icl_plane_min_cdclk(const struct intel_crtc_state *crtc_state,
>  {
>  	unsigned int pixel_rate = intel_plane_pixel_rate(crtc_state, plane_state);
>  
> -	/* two pixels per clock */
> -	return DIV_ROUND_UP(pixel_rate, 2);
> +	return intel_dsc_get_adjusted_pixel_rate(crtc_state, pixel_rate);

Hi Ankit,

I think the thing what you are taking of is already handled here in intel_cdclk.c:

	/*
         * When we decide to use only one VDSC engine, since
         * each VDSC operates with 1 ppc throughput, pixel clock
         * cannot be higher than the VDSC clock (cdclk)
         * If there 2 VDSC engines, then pixel clock can't be higher than
         * VDSC clock(cdclk) * 2 and so on.
         */
        if (crtc_state->dsc.compression_enable) {
                int num_vdsc_instances = intel_dsc_get_num_vdsc_instances(crtc_state);

                min_cdclk = max_t(int, min_cdclk,
                                  DIV_ROUND_UP(crtc_state->pixel_rate,
                                               num_vdsc_instances));
        }

Also even if something still have to be done here, I think we should preferrably
deal with anything related to DSC in a single place, to prevent any kind of
confusion(when those checks are scattered in different places, it is way more easy to forget/not notice something)

I think intel_pixel_rate_to_cdclk isn't supposed to know anything about DSC or any other specifics like audio checks and etc - it is
just dealing with the "default" uncompressed case.
Any other additional limitations or checks we apply after those, as there are
quite many anyway.

Stan


>  }
>  
>  static void
> -- 
> 2.40.1
> 


More information about the dri-devel mailing list