[PATCH v3] drm/ssd130x: Fix an oops when attempting to update a disabled plane

Maxime Ripard mripard at redhat.com
Thu Jul 20 10:02:12 UTC 2023


Hi,

On Mon, Jul 17, 2023 at 06:30:22PM +0200, Javier Martinez Canillas wrote:
> Geert reports that the following NULL pointer dereference happens for him
> after commit 49d7d581ceaf ("drm/ssd130x: Don't allocate buffers on each
> plane update"):
> 
>     [drm] Initialized ssd130x 1.0.0 20220131 for 0-003c on minor 0
>     ssd130x-i2c 0-003c: [drm] surface width(128), height(32), bpp(1)
>     and format(R1   little-endian (0x20203152))
>     Unable to handle kernel NULL pointer dereference at virtual address 00000000
>     Oops [#1]
>     CPU: 0 PID: 1 Comm: swapper Not tainted
>     6.5.0-rc1-orangecrab-02219-g0a529a1e4bf4 #565
>     epc : ssd130x_update_rect.isra.0+0x13c/0x340
>      ra : ssd130x_update_rect.isra.0+0x2bc/0x340
>     ...
>     status: 00000120 badaddr: 00000000 cause: 0000000f
>     [<c0303d90>] ssd130x_update_rect.isra.0+0x13c/0x340
>     [<c0304200>] ssd130x_primary_plane_helper_atomic_update+0x26c/0x284
>     [<c02f8d54>] drm_atomic_helper_commit_planes+0xfc/0x27c
>     [<c02f9314>] drm_atomic_helper_commit_tail+0x5c/0xb4
>     [<c02f94fc>] commit_tail+0x190/0x1b8
>     [<c02f99fc>] drm_atomic_helper_commit+0x194/0x1c0
>     [<c02c5d00>] drm_atomic_commit+0xa4/0xe4
>     [<c02cce40>] drm_client_modeset_commit_atomic+0x244/0x278
>     [<c02ccef0>] drm_client_modeset_commit_locked+0x7c/0x1bc
>     [<c02cd064>] drm_client_modeset_commit+0x34/0x64
>     [<c0301a78>] __drm_fb_helper_restore_fbdev_mode_unlocked+0xc4/0xe8
>     [<c0303424>] drm_fb_helper_set_par+0x38/0x58
>     [<c027c410>] fbcon_init+0x294/0x534
>     ...
> 
> The problem is that fbcon calls fbcon_init() which triggers a DRM modeset
> and this leads to drm_atomic_helper_commit_planes() attempting to commit
> the atomic state for all planes, even the ones whose CRTC is not enabled.
> 
> Since the primary plane buffer is allocated in the encoder .atomic_enable
> callback, this happens after that initial modeset commit and leads to the
> mentioned NULL pointer dereference.

I think that's where the problem lies: you must not allocate a buffer in
atomic_enable.

After drm_atomic_helper_swap_state(), the new commit is being applied
and you aren't allowed to fail, and an allocation can fail.

Everything needs to be prepared by the time _swap_state is called, and
it's one of the point of atomic_check.

So you need to allocate your buffer there, and use it in whatever
atomic_commit related hook you need it in.

The typical way of doing this would be to create a custom state
structure that embeds the global one, create your own reset,
atomic_duplicate_state and atomic_destroy_state implementations, and
store the buffer pointer there.

Maxime
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20230720/3ae27793/attachment.sig>


More information about the dri-devel mailing list