[PATCH v6] drm/i915/selftest/gsc: Ensure GSC Proxy init completes before selftests

[Ceraolo Spurio, Daniele]

On 7/20/2023 2:40 PM, Alan Previn wrote:
> On MTL, if the GSC Proxy init flows haven't completed, submissions to the
> GSC engine will fail. Those init flows are dependent on the mei's
> gsc_proxy component that is loaded in parallel with i915 and a
> worker that could potentially start after i915 driver init is done.
>
> That said, all subsytems that access the GSC engine today does check
> for such init flow completion before using the GSC engine. However,
> selftests currently don't wait on anything before starting.
>
> To fix this, add a waiter function at the start of __run_selftests
> that waits for gsc-proxy init flows to complete. Selftests shouldn't
> care if the proxy-init failed as that should be flagged elsewhere.
>
> Difference from prior versions:
>     v6: - Add a helper that returns something more than a boolean
>           so we selftest can stop waiting if proxy-init hadn't
>           completed but failed (Daniele).
>     v5: - Move the call to __wait_gsc_proxy_completed from common
>           __run_selftests dispatcher to the group-level selftest
>           function (Trvtko).
>         - change the pr_info to pr_warn if we hit the timeout.
>     v4: - Remove generalized waiters function table framework (Tvrtko).
>         - Remove mention of CI-framework-timeout from comments (Tvrtko).
>     v3: - Rebase to latest drm-tip.
>     v2: - Based on internal testing, increase the timeout for gsc-proxy
>           specific case to 8 seconds.
>
> Signed-off-by: Alan Previn <alan.previn.teres.alexis at intel.com>
> ---
>   drivers/gpu/drm/i915/gt/uc/intel_gsc_fw.c     | 14 +++++++++
>   drivers/gpu/drm/i915/gt/uc/intel_gsc_fw.h     |  1 +
>   .../gpu/drm/i915/selftests/i915_selftest.c    | 31 +++++++++++++++++++
>   3 files changed, 46 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/gt/uc/intel_gsc_fw.c b/drivers/gpu/drm/i915/gt/uc/intel_gsc_fw.c
> index ab1a456f833d..163021705210 100644
> --- a/drivers/gpu/drm/i915/gt/uc/intel_gsc_fw.c
> +++ b/drivers/gpu/drm/i915/gt/uc/intel_gsc_fw.c
> @@ -45,6 +45,20 @@ bool intel_gsc_uc_fw_proxy_init_done(struct intel_gsc_uc *gsc, bool needs_wakere
>   	       HECI1_FWSTS1_PROXY_STATE_NORMAL;
>   }
>   
> +int intel_gsc_uc_fw_proxy_get_status(struct intel_gsc_uc *gsc)
> +{
> +	if (!(IS_ENABLED(CONFIG_INTEL_MEI_GSC_PROXY)))
> +		return -ENODEV;
> +	if (!intel_uc_fw_is_loadable(&gsc->fw))
> +		return -ENODEV;
> +	if (__intel_uc_fw_status(&gsc->fw) == INTEL_UC_FIRMWARE_LOAD_FAIL)

You're missing the change to move the FW status to LOAD_FAIL if the 
proxy fails to initialize. Or are you expecting 
https://patchwork.freedesktop.org/series/118723/, which included that 
change, to be merged first?

Daniele

> +		return -ENOLINK;
> +	if (!intel_gsc_uc_fw_proxy_init_done(gsc, true))
> +		return -EAGAIN;
> +
> +	return 0;
> +}
> +
>   bool intel_gsc_uc_fw_init_done(struct intel_gsc_uc *gsc)
>   {
>   	return gsc_uc_get_fw_status(gsc_uc_to_gt(gsc)->uncore, false) &
> diff --git a/drivers/gpu/drm/i915/gt/uc/intel_gsc_fw.h b/drivers/gpu/drm/i915/gt/uc/intel_gsc_fw.h
> index ad2167ce9137..bc9dd0de8aaf 100644
> --- a/drivers/gpu/drm/i915/gt/uc/intel_gsc_fw.h
> +++ b/drivers/gpu/drm/i915/gt/uc/intel_gsc_fw.h
> @@ -16,5 +16,6 @@ int intel_gsc_fw_get_binary_info(struct intel_uc_fw *gsc_fw, const void *data, s
>   int intel_gsc_uc_fw_upload(struct intel_gsc_uc *gsc);
>   bool intel_gsc_uc_fw_init_done(struct intel_gsc_uc *gsc);
>   bool intel_gsc_uc_fw_proxy_init_done(struct intel_gsc_uc *gsc, bool needs_wakeref);
> +int intel_gsc_uc_fw_proxy_get_status(struct intel_gsc_uc *gsc);
>   
>   #endif
> diff --git a/drivers/gpu/drm/i915/selftests/i915_selftest.c b/drivers/gpu/drm/i915/selftests/i915_selftest.c
> index 39da0fb0d6d2..ee79e0809a6d 100644
> --- a/drivers/gpu/drm/i915/selftests/i915_selftest.c
> +++ b/drivers/gpu/drm/i915/selftests/i915_selftest.c
> @@ -24,6 +24,8 @@
>   #include <linux/random.h>
>   
>   #include "gt/intel_gt_pm.h"
> +#include "gt/uc/intel_gsc_fw.h"
> +
>   #include "i915_driver.h"
>   #include "i915_drv.h"
>   #include "i915_selftest.h"
> @@ -127,6 +129,31 @@ static void set_default_test_all(struct selftest *st, unsigned int count)
>   		st[i].enabled = true;
>   }
>   
> +static bool
> +__gsc_proxy_init_progressing(struct intel_gsc_uc *gsc)
> +{
> +	return intel_gsc_uc_fw_proxy_get_status(gsc) == -EAGAIN;
> +}
> +
> +static void
> +__wait_gsc_proxy_completed(struct drm_i915_private *i915)
> +{
> +	bool need_to_wait = (IS_ENABLED(CONFIG_INTEL_MEI_GSC_PROXY) &&
> +			     i915->media_gt &&
> +			     HAS_ENGINE(i915->media_gt, GSC0) &&
> +			     intel_uc_fw_is_loadable(&i915->media_gt->uc.gsc.fw));
> +	/*
> +	 * The gsc proxy component depends on the kernel component driver load ordering
> +	 * and in corner cases (the first time after an IFWI flash), init-completion
> +	 * firmware flows take longer.
> +	 */
> +	unsigned long timeout_ms = 8000;
> +
> +	if (need_to_wait && wait_for(!__gsc_proxy_init_progressing(&i915->media_gt->uc.gsc),
> +				     timeout_ms))
> +		pr_warn(DRIVER_NAME "Timed out waiting for gsc_proxy_completion!\n");
> +}
> +
>   static int __run_selftests(const char *name,
>   			   struct selftest *st,
>   			   unsigned int count,
> @@ -206,6 +233,8 @@ int i915_live_selftests(struct pci_dev *pdev)
>   	if (!i915_selftest.live)
>   		return 0;
>   
> +	__wait_gsc_proxy_completed(pdev_to_i915(pdev));
> +
>   	err = run_selftests(live, pdev_to_i915(pdev));
>   	if (err) {
>   		i915_selftest.live = err;
> @@ -227,6 +256,8 @@ int i915_perf_selftests(struct pci_dev *pdev)
>   	if (!i915_selftest.perf)
>   		return 0;
>   
> +	__wait_gsc_proxy_completed(pdev_to_i915(pdev));
> +
>   	err = run_selftests(perf, pdev_to_i915(pdev));
>   	if (err) {
>   		i915_selftest.perf = err;
>
> base-commit: cc69df372f21eb3073c062132ee9eb3649605931