[Intel-gfx] [PATCH v7 5/9] drm/i915/gt: Enable the CCS_FLUSH bit in the pipe control

[Andi Shyti]

Hi Nirmoy,

On Fri, Jul 21, 2023 at 12:05:10PM +0200, Andrzej Hajda wrote:
> On 20.07.2023 23:07, Andi Shyti wrote:
> > Enable the CCS_FLUSH bit 13 in the control pipe for render and
> > compute engines in platforms starting from Meteor Lake (BSPEC
> > 43904 and 47112).
> > 
> > Fixes: 972282c4cf24 ("drm/i915/gen12: Add aux table invalidate for all engines")
> > Signed-off-by: Andi Shyti <andi.shyti at linux.intel.com>
> > Cc: Jonathan Cavitt <jonathan.cavitt at intel.com>
> > Cc: Nirmoy Das <nirmoy.das at intel.com>
> > Cc: <stable at vger.kernel.org> # v5.8+
> > ---
> >   drivers/gpu/drm/i915/gt/gen8_engine_cs.c     | 7 +++++++
> >   drivers/gpu/drm/i915/gt/intel_gpu_commands.h | 1 +
> >   2 files changed, 8 insertions(+)
> > 
> > diff --git a/drivers/gpu/drm/i915/gt/gen8_engine_cs.c b/drivers/gpu/drm/i915/gt/gen8_engine_cs.c
> > index 7566c89d9def3..9d050b9a19194 100644
> > --- a/drivers/gpu/drm/i915/gt/gen8_engine_cs.c
> > +++ b/drivers/gpu/drm/i915/gt/gen8_engine_cs.c
> > @@ -218,6 +218,13 @@ int gen12_emit_flush_rcs(struct i915_request *rq, u32 mode)
> >   		bit_group_0 |= PIPE_CONTROL0_HDC_PIPELINE_FLUSH;
> > +		/*
> > +		 * When required, in MTL+ platforms we need to
> > +		 * set the CCS_FLUSH bit in the pipe control
> > +		 */
> > +		if (GRAPHICS_VER_FULL(rq->i915) >= IP_VER(12, 70))
> > +			bit_group_0 |= PIPE_CONTROL_CCS_FLUSH;
> 
> BSpec 43904 mentions also other platforms. Why only MTL+?

This is the process of quiescing the engine and that is done in
the pipe control sequence.

In the pipe control sequence each engine has its own sequence,
even though render and compute overlap on some bits, while the
others overlap on other bits.

Besides that MTL+ need this extra bit to be set in the pipe
control and that is bit 13 defined as PIPE_CONTROL_CCS_FLUSH.

Thanks,
Andi