[PATCH] drm/nouveau/nvkm/dp: Add hack to fix DP 1.3+ DPCD issues

Lyude Paul lyude at redhat.com
Thu Jul 27 21:57:33 UTC 2023


On Sun, 2023-07-09 at 01:42 +0200, Karol Herbst wrote:
> On Fri, Jul 7, 2023 at 11:58 PM Lyude Paul <lyude at redhat.com> wrote:
> > 
> > Currently we use the drm_dp_dpcd_read_caps() helper in the DRM side of
> > nouveau in order to read the DPCD of a DP connector, which makes sure we do
> > the right thing and also check for extended DPCD caps. However, it turns
> > out we're not currently doing this on the nvkm side since we don't have
> > access to the drm_dp_aux structure there - which means that the DRM side of
> > the driver and the NVKM side can end up with different DPCD capabilities
> > for the same connector.
> > 
> > Ideally to fix this, we want to start setting up the drm_dp_aux device in
> > NVKM before we've made contact with the DRM side - which should be pretty
> > easy to accomplish (I'm already working on it!). Until then however, let's
> > workaround this problem by porting a copy of drm_dp_read_dpcd_caps() into
> > NVKM - which should fix this issue.
> > 
> > Issue: https://gitlab.freedesktop.org/drm/nouveau/-/issues/211
> 
> Should a Fixes: or Cc: stable tag be added so it gets backported?

JFYI I think not adding one is fine nowadays? The stable bot seems to be
pretty good at catching anything with the words fix/fixes in it

> 
> > Signed-off-by: Lyude Paul <lyude at redhat.com>
> > ---
> >  drivers/gpu/drm/nouveau/nvkm/engine/disp/dp.c | 48 ++++++++++++++++++-
> >  1 file changed, 47 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/disp/dp.c b/drivers/gpu/drm/nouveau/nvkm/engine/disp/dp.c
> > index 40c8ea43c42f..b8ac66b4a2c4 100644
> > --- a/drivers/gpu/drm/nouveau/nvkm/engine/disp/dp.c
> > +++ b/drivers/gpu/drm/nouveau/nvkm/engine/disp/dp.c
> > @@ -26,6 +26,8 @@
> >  #include "head.h"
> >  #include "ior.h"
> > 
> > +#include <drm/display/drm_dp.h>
> > +
> >  #include <subdev/bios.h>
> >  #include <subdev/bios/init.h>
> >  #include <subdev/gpio.h>
> > @@ -634,6 +636,50 @@ nvkm_dp_enable_supported_link_rates(struct nvkm_outp *outp)
> >         return outp->dp.rates != 0;
> >  }
> > 
> > +/* XXX: This is a big fat hack, and this is just drm_dp_read_dpcd_caps()
> 
> Well.. maybe we should rephrase that _if_ we want to see it
> backported. But is this code really that bad? It kinda looks
> reasonable enough.
> 
> > + * converted to work inside nvkm. This is a temporary holdover until we start
> > + * passing the drm_dp_aux device through NVKM
> > + */
> > +static int
> > +nvkm_dp_read_dpcd_caps(struct nvkm_outp *outp)
> > +{
> > +       struct nvkm_i2c_aux *aux = outp->dp.aux;
> > +       u8 dpcd_ext[DP_RECEIVER_CAP_SIZE];
> > +       int ret;
> > +
> > +       ret = nvkm_rdaux(aux, DPCD_RC00_DPCD_REV, outp->dp.dpcd, DP_RECEIVER_CAP_SIZE);
> > +       if (ret < 0)
> > +               return ret;
> > +
> > +       /*
> > +        * Prior to DP1.3 the bit represented by
> > +        * DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT was reserved.
> > +        * If it is set DP_DPCD_REV at 0000h could be at a value less than
> > +        * the true capability of the panel. The only way to check is to
> > +        * then compare 0000h and 2200h.
> > +        */
> > +       if (!(outp->dp.dpcd[DP_TRAINING_AUX_RD_INTERVAL] &
> > +             DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT))
> > +               return 0;
> > +
> > +       ret = nvkm_rdaux(aux, DP_DP13_DPCD_REV, dpcd_ext, sizeof(dpcd_ext));
> > +       if (ret < 0)
> > +               return ret;
> > +
> > +       if (outp->dp.dpcd[DP_DPCD_REV] > dpcd_ext[DP_DPCD_REV]) {
> > +               OUTP_DBG(outp, "Extended DPCD rev less than base DPCD rev (%d > %d)\n",
> > +                        outp->dp.dpcd[DP_DPCD_REV], dpcd_ext[DP_DPCD_REV]);
> > +               return 0;
> > +       }
> > +
> > +       if (!memcmp(outp->dp.dpcd, dpcd_ext, sizeof(dpcd_ext)))
> > +               return 0;
> > +
> > +       memcpy(outp->dp.dpcd, dpcd_ext, sizeof(dpcd_ext));
> > +
> > +       return 0;
> > +}
> > +
> >  void
> >  nvkm_dp_enable(struct nvkm_outp *outp, bool auxpwr)
> >  {
> > @@ -689,7 +735,7 @@ nvkm_dp_enable(struct nvkm_outp *outp, bool auxpwr)
> >                         memset(outp->dp.lttpr, 0x00, sizeof(outp->dp.lttpr));
> >                 }
> > 
> > -               if (!nvkm_rdaux(aux, DPCD_RC00_DPCD_REV, outp->dp.dpcd, sizeof(outp->dp.dpcd))) {
> > +               if (!nvkm_dp_read_dpcd_caps(outp)) {
> >                         const u8 rates[] = { 0x1e, 0x14, 0x0a, 0x06, 0 };
> >                         const u8 *rate;
> >                         int rate_max;
> > --
> > 2.40.1
> > 
> 

-- 
Cheers,
 Lyude Paul (she/her)
 Software Engineer at Red Hat



More information about the dri-devel mailing list