[PATCH v2 2/3] dt-bindings: display: simple: support non-default data-mapping

[Johannes Zink]

Hi Laurent,

thank you for your review.

On 6/2/23 17:35, Laurent Pinchart wrote:
> Hi Johannes,
> 
> Thank you for the patch.
> 
> On Tue, May 23, 2023 at 10:19:42AM +0200, Johannes Zink wrote:
>> Some Displays support more than just a single default lvds data mapping,
> 
> s/lvds/LVDS/

ack, gonna fix in V3

> 
>> which can be used to run displays on only 3 LVDS lanes in the jeida-18
>> data-mapping mode.
>>
>> Add an optional data-mapping property to allow overriding the default
>> data mapping. As it does not generally apply to any display and bus: use
> 
> s/bus:/bus,/

ack, gonna fix in V3

> 
>> it selectively on the innolux,g101ice-l01, which supports changing the
>> data mapping via a strapping pin.
>>
>> Signed-off-by: Johannes Zink <j.zink at pengutronix.de>
>> ---
>>
>> Changes:
>>
>> v1 -> v2: - worked in Rob's review findings (thanks for reviewing my
>>              work): use extracted common property instead of duplicating
>> 	    the property
>> 	  - refined commit message
>> 	  - add an example dts for automated checking
>> ---
>>   .../bindings/display/panel/panel-simple.yaml       | 26 +++++++++++++++++++++-
>>   1 file changed, 25 insertions(+), 1 deletion(-)
>>
>> diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
>> index ec50dd268314..698301c8c920 100644
>> --- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
>> +++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
>> @@ -21,9 +21,9 @@ description: |
>>   
>>   allOf:
>>     - $ref: panel-common.yaml#
>> +  - $ref: ../lvds-data-mapping.yaml#
>>   
>>   properties:
>> -
>>     compatible:
>>       enum:
>>       # compatible must be listed in alphabetical order, ordered by compatible.
>> @@ -353,6 +353,17 @@ properties:
>>     power-supply: true
>>     no-hpd: true
>>     hpd-gpios: true
>> +  data-mapping: true
> 
> As the property is optional, don't you need a default value ?

as the simple-bus implicitely assumes default data mappings for LVDS panels, I 
think this is not necessary. If the property is not used in a DT, the default 
data mapping is used.

Best regards
Johannes

> 
>> +
>> +if:
>> +  not:
>> +    properties:
>> +      compatible:
>> +        contains:
>> +          const: innolux,g101ice-l01
>> +then:
>> +  properties:
>> +    data-mapping: false
>>   
>>   additionalProperties: false
>>   
>> @@ -372,3 +383,16 @@ examples:
>>           };
>>         };
>>       };
>> +  - |
>> +    panel_lvds: panel-lvds {
>> +      compatible = "innolux,g101ice-l01";
>> +      power-supply = <&vcc_lcd_reg>;
>> +
>> +      data-mapping = "jeida-24";
>> +
>> +      port {
>> +        panel_in_lvds: endpoint {
>> +          remote-endpoint = <&ltdc_out_lvds>;
>> +        };
>> +      };
>> +    };
>>
> 

-- 
Pengutronix e.K.                | Johannes Zink                  |
Steuerwalder Str. 21            | https://www.pengutronix.de/    |
31137 Hildesheim, Germany       | Phone: +49-5121-206917-0       |
Amtsgericht Hildesheim, HRA 2686| Fax:   +49-5121-206917-5555    |