[PATCH v2 6/8] drm/msm/dpu: drop DPU_INTF_TE feature flag

[Dmitry Baryshkov]

Replace the only user of the DPU_INTF_TE feature flag with the direct
DPU version comparison.

Reviewed-by: Marijn Suijten <marijn.suijten at somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c | 5 +++--
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c       | 1 -
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h       | 2 --
 3 files changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
index 9589fe719452..d1f309f45fa1 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
@@ -776,8 +776,9 @@ struct dpu_encoder_phys *dpu_encoder_phys_cmd_init(
 	phys_enc->intf_mode = INTF_MODE_CMD;
 	cmd_enc->stream_sel = 0;
 
-	phys_enc->has_intf_te = test_bit(DPU_INTF_TE,
-					 &phys_enc->hw_intf->cap->features);
+	/* DPU before 5.0 use PINGPONG for TE handling */
+	if (phys_enc->dpu_kms->catalog->mdss_ver->core_major_ver >= 5)
+		phys_enc->has_intf_te = true;
 
 	atomic_set(&cmd_enc->pending_vblank_cnt, 0);
 	init_waitqueue_head(&cmd_enc->pending_vblank_wq);
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
index c19dc70d4456..17426f0f981e 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
@@ -100,7 +100,6 @@
 
 #define INTF_SC7180_MASK \
 	(BIT(DPU_INTF_INPUT_CTRL) | \
-	 BIT(DPU_INTF_TE) | \
 	 BIT(DPU_INTF_STATUS_SUPPORTED) | \
 	 BIT(DPU_DATA_HCTL_EN))
 
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
index a6f8eee58b92..69c9099cf5a6 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
@@ -175,7 +175,6 @@ enum {
  * INTF sub-blocks
  * @DPU_INTF_INPUT_CTRL             Supports the setting of pp block from which
  *                                  pixel data arrives to this INTF
- * @DPU_INTF_TE                     INTF block has TE configuration support
  * @DPU_DATA_HCTL_EN                Allows data to be transferred at different rate
  *                                  than video timing
  * @DPU_INTF_STATUS_SUPPORTED       INTF block has INTF_STATUS register
@@ -183,7 +182,6 @@ enum {
  */
 enum {
 	DPU_INTF_INPUT_CTRL = 0x1,
-	DPU_INTF_TE,
 	DPU_DATA_HCTL_EN,
 	DPU_INTF_STATUS_SUPPORTED,
 	DPU_INTF_MAX
-- 
2.39.2