[PATCH v2] drm/panel: Enable DSC and CMD mode for Visionox VTDR6130 panel

[neil.armstrong at linaro.org]

Hi,

On 28/07/2023 03:26, Paloma Arellano wrote:
> Enable display compression (DSC v1.2) and CMD mode for 1080x2400 Visionox
> VTDR6130 AMOLED DSI panel. In addition, this patch will set the default
> to command mode with DSC enabled.
> 
> Note: This patch has only been validated DSC over command mode as DSC over
> video mode has never been validated for the MSM driver before.
> 
> Depends on: "Add prepare_prev_first flag to Visionox VTDR6130" [1]

I'll run a test on my SM8550 platform,

Thanks,
Neil

> 
> Changes since v1:
>   - Changed from email address
> 
> [1] https://patchwork.freedesktop.org/series/121337/
> 
> Suggested-by: Jessica Zhang <quic_jesszhan at quicinc.com>
> Signed-off-by: Paloma Arellano <quic_parellan at quicinc.com>
> ---
>   .../gpu/drm/panel/panel-visionox-vtdr6130.c   | 77 ++++++++++++++++++-
>   1 file changed, 73 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/gpu/drm/panel/panel-visionox-vtdr6130.c b/drivers/gpu/drm/panel/panel-visionox-vtdr6130.c
> index e1363e128e7e..5658d39a3a6b 100644
> --- a/drivers/gpu/drm/panel/panel-visionox-vtdr6130.c
> +++ b/drivers/gpu/drm/panel/panel-visionox-vtdr6130.c
> @@ -9,6 +9,7 @@
>   #include <linux/of.h>
>   
>   #include <drm/display/drm_dsc.h>
> +#include <drm/display/drm_dsc_helper.h>
>   #include <drm/drm_mipi_dsi.h>
>   #include <drm/drm_modes.h>
>   #include <drm/drm_panel.h>
> @@ -20,7 +21,8 @@ struct visionox_vtdr6130 {
>   	struct mipi_dsi_device *dsi;
>   	struct gpio_desc *reset_gpio;
>   	struct regulator_bulk_data supplies[3];
> -	bool prepared;
> +	bool prepared, enabled;
> +	bool video_mode;
>   };
>   
>   static inline struct visionox_vtdr6130 *to_visionox_vtdr6130(struct drm_panel *panel)
> @@ -50,12 +52,18 @@ static int visionox_vtdr6130_on(struct visionox_vtdr6130 *ctx)
>   	if (ret)
>   		return ret;
>   
> +	mipi_dsi_dcs_write_seq(dsi, 0x03, 0x01);
>   	mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_CONTROL_DISPLAY, 0x20);
>   	mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_SET_DISPLAY_BRIGHTNESS, 0x00, 0x00);
>   	mipi_dsi_dcs_write_seq(dsi, 0x59, 0x09);
>   	mipi_dsi_dcs_write_seq(dsi, 0x6c, 0x01);
>   	mipi_dsi_dcs_write_seq(dsi, 0x6d, 0x00);
> -	mipi_dsi_dcs_write_seq(dsi, 0x6f, 0x01);
> +	
> +	if (ctx->video_mode)
> +		mipi_dsi_dcs_write_seq(dsi, 0x6f, 0x01);
> +	else
> +		mipi_dsi_dcs_write_seq(dsi, 0x6f, 0x02);
> +
>   	mipi_dsi_dcs_write_seq(dsi, 0x70,
>   			       0x12, 0x00, 0x00, 0xab, 0x30, 0x80, 0x09, 0x60, 0x04,
>   			       0x38, 0x00, 0x28, 0x02, 0x1c, 0x02, 0x1c, 0x02, 0x00,
> @@ -214,6 +222,42 @@ static const struct drm_display_mode visionox_vtdr6130_mode = {
>   	.height_mm = 157,
>   };
>   
> +static int visionox_vtdr6130_enable(struct drm_panel *panel)
> +{
> +	struct visionox_vtdr6130 *ctx = to_visionox_vtdr6130(panel);
> +	struct mipi_dsi_device *dsi = ctx->dsi;
> +	struct drm_dsc_picture_parameter_set pps;
> +	int ret;
> +
> +	if (ctx->enabled)
> +		return 0;
> +
> +	if (!dsi->dsc) {
> +		dev_err(&dsi->dev, "DSC not attached to DSI\n");
> +		return -ENODEV;
> +	}
> +
> +	drm_dsc_pps_payload_pack(&pps, dsi->dsc);
> +	ret = mipi_dsi_picture_parameter_set(dsi, &pps);
> +	if (ret) {
> +		dev_err(&dsi->dev, "Failed to set PPS\n");
> +		return ret;
> +	}
> +
> +	ctx->enabled = true;
> +
> +	return 0;
> +}
> +
> +static int visionox_vtdr6130_disable(struct drm_panel *panel)
> +{
> +	struct visionox_vtdr6130 *ctx = to_visionox_vtdr6130(panel);
> +
> +	ctx->enabled = false;
> +
> +	return 0;
> +}
> +
>   static int visionox_vtdr6130_get_modes(struct drm_panel *panel,
>   				       struct drm_connector *connector)
>   {
> @@ -237,6 +281,8 @@ static const struct drm_panel_funcs visionox_vtdr6130_panel_funcs = {
>   	.prepare = visionox_vtdr6130_prepare,
>   	.unprepare = visionox_vtdr6130_unprepare,
>   	.get_modes = visionox_vtdr6130_get_modes,
> +	.enable = visionox_vtdr6130_enable,
> +	.disable = visionox_vtdr6130_disable,
>   };
>   
>   static int visionox_vtdr6130_bl_update_status(struct backlight_device *bl)
> @@ -269,11 +315,31 @@ static int visionox_vtdr6130_probe(struct mipi_dsi_device *dsi)
>   {
>   	struct device *dev = &dsi->dev;
>   	struct visionox_vtdr6130 *ctx;
> +	struct drm_dsc_config *dsc;
>   	int ret;
>   
>   	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
>   	if (!ctx)
>   		return -ENOMEM;
> +	
> +	ctx->video_mode = of_property_read_bool(dev->of_node, "enforce-video-mode");
> +
> +	dsc = devm_kzalloc(dev, sizeof(*dsc), GFP_KERNEL);
> +	if (!dsc)
> +		return -ENOMEM;
> +
> +	/* Set DSC params */
> +	dsc->dsc_version_major = 0x1;
> +	dsc->dsc_version_minor = 0x2;
> +
> +	dsc->slice_height = 40;
> +	dsc->slice_width = 540;
> +	dsc->slice_count = 2;
> +	dsc->bits_per_component = 8;
> +	dsc->bits_per_pixel = 8 << 4;
> +	dsc->block_pred_enable = true;
> +
> +	dsi->dsc = dsc;
>   
>   	ctx->supplies[0].supply = "vddio";
>   	ctx->supplies[1].supply = "vci";
> @@ -294,8 +360,11 @@ static int visionox_vtdr6130_probe(struct mipi_dsi_device *dsi)
>   
>   	dsi->lanes = 4;
>   	dsi->format = MIPI_DSI_FMT_RGB888;
> -	dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_NO_EOT_PACKET |
> -			  MIPI_DSI_CLOCK_NON_CONTINUOUS;
> +
> +	dsi->mode_flags = MIPI_DSI_MODE_NO_EOT_PACKET | MIPI_DSI_CLOCK_NON_CONTINUOUS;
> +	if (ctx->video_mode)
> +		dsi->mode_flags |= MIPI_DSI_MODE_VIDEO;
> +
>   	ctx->panel.prepare_prev_first = true;
>   
>   	drm_panel_init(&ctx->panel, dev, &visionox_vtdr6130_panel_funcs,