[PATCH 2/2] usb: typec: add support for the nb7vpq904m Type-C Linear Redriver
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Thu Jun 1 09:37:00 UTC 2023
On 01/06/2023 12:21, neil.armstrong at linaro.org wrote:
> From: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
>
> Add support for the ON Semiconductor NB7VPQ904M Type-C USB SuperSpeed
> and DisplayPort ALT Mode Linear Redriver chip found on some devices
> with a Type-C port.
>
> The redriver compensates ultra High-Speeed DisplayPort and USB
> Super Speed signal integrity losses mainly due to PCB & transmission
> cables.
>
> The redriver doesn't support SuperSpeed lines swapping, but
> can support Type-C SBU lines swapping.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> Signed-off-by: Neil Armstrong <neil.armstrong at linaro.org>
> ---
> drivers/usb/typec/mux/Kconfig | 8 +
> drivers/usb/typec/mux/Makefile | 1 +
> drivers/usb/typec/mux/nb7vpq904m.c | 526 +++++++++++++++++++++++++++++++++++++
> 3 files changed, 535 insertions(+)
>
> diff --git a/drivers/usb/typec/mux/Kconfig b/drivers/usb/typec/mux/Kconfig
> index c46fa4f9d3df..8c4d6b8fb75c 100644
> --- a/drivers/usb/typec/mux/Kconfig
> +++ b/drivers/usb/typec/mux/Kconfig
> @@ -35,4 +35,12 @@ config TYPEC_MUX_INTEL_PMC
> control the USB role switch and also the multiplexer/demultiplexer
> switches used with USB Type-C Alternate Modes.
>
> +config TYPEC_MUX_NB7VPQ904M
> + tristate "On Semiconductor NB7VPQ904M Type-C redriver driver"
> + depends on I2C
> + select REGMAP_I2C
> + help
> + Say Y or M if your system has a On Semiconductor NB7VPQ904M Type-C
> + redriver chip found on some devices with a Type-C port.
> +
> endmenu
> diff --git a/drivers/usb/typec/mux/Makefile b/drivers/usb/typec/mux/Makefile
> index dda67e19b58b..76196096ef41 100644
> --- a/drivers/usb/typec/mux/Makefile
> +++ b/drivers/usb/typec/mux/Makefile
> @@ -4,3 +4,4 @@ obj-$(CONFIG_TYPEC_MUX_FSA4480) += fsa4480.o
> obj-$(CONFIG_TYPEC_MUX_GPIO_SBU) += gpio-sbu-mux.o
> obj-$(CONFIG_TYPEC_MUX_PI3USB30532) += pi3usb30532.o
> obj-$(CONFIG_TYPEC_MUX_INTEL_PMC) += intel_pmc_mux.o
> +obj-$(CONFIG_TYPEC_MUX_NB7VPQ904M) += nb7vpq904m.o
> diff --git a/drivers/usb/typec/mux/nb7vpq904m.c b/drivers/usb/typec/mux/nb7vpq904m.c
> new file mode 100644
> index 000000000000..2f85ad9e417a
> --- /dev/null
> +++ b/drivers/usb/typec/mux/nb7vpq904m.c
> @@ -0,0 +1,526 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * OnSemi NB7VPQ904M Type-C driver
> + *
> + * Copyright (C) 2023 Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> + */
> +#include <linux/i2c.h>
> +#include <linux/mutex.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/regmap.h>
> +#include <linux/of_graph.h>
> +#include <drm/drm_bridge.h>
> +#include <linux/usb/typec_dp.h>
> +#include <linux/usb/typec_mux.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/regulator/consumer.h>
> +
> +#define NB7_CHNA 0
> +#define NB7_CHNB 1
> +#define NB7_CHNC 2
> +#define NB7_CHND 3
> +#define NB7_IS_CHAN_AD(channel) (channel == NB7_CHNA || channel == NB7_CHND)
> +
> +#define GEN_DEV_SET_REG 0x00
> +
> +#define GEN_DEV_SET_CHIP_EN BIT(0)
> +#define GEN_DEV_SET_CHNA_EN BIT(4)
> +#define GEN_DEV_SET_CHNB_EN BIT(5)
> +#define GEN_DEV_SET_CHNC_EN BIT(6)
> +#define GEN_DEV_SET_CHND_EN BIT(7)
> +
> +#define GEN_DEV_SET_OP_MODE_MASK GENMASK(3, 1)
> +
> +#define GEN_DEV_SET_OP_MODE_DP_CC2 0
> +#define GEN_DEV_SET_OP_MODE_DP_CC1 1
> +#define GEN_DEV_SET_OP_MODE_DP_4LANE 2
> +#define GEN_DEV_SET_OP_MODE_USB 5
> +
> +#define EQ_SETTING_REG_BASE 0x01
> +#define EQ_SETTING_REG(n) (EQ_SETTING_REG_BASE + (n) * 2)
> +#define EQ_SETTING_MASK GENMASK(3, 1)
> +
> +#define OUTPUT_COMPRESSION_AND_POL_REG_BASE 0x02
> +#define OUTPUT_COMPRESSION_AND_POL_REG(n) (OUTPUT_COMPRESSION_AND_POL_REG_BASE + (n) * 2)
> +#define OUTPUT_COMPRESSION_MASK GENMASK(2, 1)
> +
> +#define FLAT_GAIN_REG_BASE 0x18
> +#define FLAT_GAIN_REG(n) (FLAT_GAIN_REG_BASE + (n) * 2)
> +#define FLAT_GAIN_MASK GENMASK(1, 0)
> +
> +#define LOSS_MATCH_REG_BASE 0x19
> +#define LOSS_MATCH_REG(n) (LOSS_MATCH_REG_BASE + (n) * 2)
> +#define LOSS_MATCH_MASK GENMASK(1, 0)
> +
> +#define AUX_CC_REG 0x09
> +
> +#define CHIP_VERSION_REG 0x17
> +
> +struct nb7vpq904m {
> + struct i2c_client *client;
> + struct gpio_desc *enable_gpio;
> + struct regulator *vcc_supply;
> + struct regmap *regmap;
> + struct typec_switch_dev *sw;
> + struct typec_mux_dev *mux;
> +
> + bool swap_data_lanes;
> + struct typec_switch *typec_switch;
> +
> + struct drm_bridge bridge;
> +
> + struct mutex lock; /* protect non-concurrent mux & switch */
> +
> + enum typec_orientation orientation;
> + unsigned long mode;
> + unsigned int svid;
> +};
> +
> +static void nb7vpq904m_set_channel(struct nb7vpq904m *nb7, unsigned int channel, bool dp)
> +{
> + u8 eq, out_comp, flat_gain, loss_match;
> +
> + if (dp) {
> + eq = NB7_IS_CHAN_AD(channel) ? 0x6 : 0x4;
> + out_comp = 0x3;
> + flat_gain = NB7_IS_CHAN_AD(channel) ? 0x2 : 0x1;
> + loss_match = 0x3;
> + } else {
> + eq = 0x4;
> + out_comp = 0x3;
> + flat_gain = NB7_IS_CHAN_AD(channel) ? 0x3 : 0x1;
> + loss_match = NB7_IS_CHAN_AD(channel) ? 0x1 : 0x3;
> + }
> +
> + regmap_update_bits(nb7->regmap, EQ_SETTING_REG(channel),
> + EQ_SETTING_MASK, FIELD_PREP(EQ_SETTING_MASK, eq));
> + regmap_update_bits(nb7->regmap, OUTPUT_COMPRESSION_AND_POL_REG(channel),
> + OUTPUT_COMPRESSION_MASK, FIELD_PREP(OUTPUT_COMPRESSION_MASK, out_comp));
> + regmap_update_bits(nb7->regmap, FLAT_GAIN_REG(channel),
> + FLAT_GAIN_MASK, FIELD_PREP(FLAT_GAIN_MASK, flat_gain));
> + regmap_update_bits(nb7->regmap, LOSS_MATCH_REG(channel),
> + LOSS_MATCH_MASK, FIELD_PREP(LOSS_MATCH_MASK, loss_match));
> +}
> +
> +static int nb7vpq904m_set(struct nb7vpq904m *nb7)
> +{
> + bool reverse = (nb7->orientation == TYPEC_ORIENTATION_REVERSE);
> +
> + switch (nb7->mode) {
> + case TYPEC_STATE_SAFE:
> + regmap_write(nb7->regmap, GEN_DEV_SET_REG,
> + GEN_DEV_SET_CHIP_EN |
> + GEN_DEV_SET_CHNA_EN |
> + GEN_DEV_SET_CHNB_EN |
> + GEN_DEV_SET_CHNC_EN |
> + GEN_DEV_SET_CHND_EN |
> + FIELD_PREP(GEN_DEV_SET_OP_MODE_MASK,
> + GEN_DEV_SET_OP_MODE_USB));
> + nb7vpq904m_set_channel(nb7, NB7_CHNA, false);
> + nb7vpq904m_set_channel(nb7, NB7_CHNB, false);
> + nb7vpq904m_set_channel(nb7, NB7_CHNC, false);
> + nb7vpq904m_set_channel(nb7, NB7_CHND, false);
> + regmap_write(nb7->regmap, AUX_CC_REG, 0x2);
> +
> + return 0;
> +
> + case TYPEC_STATE_USB:
> + /*
> + * Normal Orientation (CC1)
> + * A -> USB RX
> + * B -> USB TX
> + * C -> X
> + * D -> X
> + * Flipped Orientation (CC2)
> + * A -> X
> + * B -> X
> + * C -> USB TX
> + * D -> USB RX
> + *
> + * Reversed if data lanes are swapped
> + */
> + if (reverse ^ nb7->swap_data_lanes) {
> + regmap_write(nb7->regmap, GEN_DEV_SET_REG,
> + GEN_DEV_SET_CHIP_EN |
> + GEN_DEV_SET_CHNA_EN |
> + GEN_DEV_SET_CHNB_EN |
> + FIELD_PREP(GEN_DEV_SET_OP_MODE_MASK,
> + GEN_DEV_SET_OP_MODE_USB));
> + nb7vpq904m_set_channel(nb7, NB7_CHNA, false);
> + nb7vpq904m_set_channel(nb7, NB7_CHNB, false);
> + } else {
> + regmap_write(nb7->regmap, GEN_DEV_SET_REG,
> + GEN_DEV_SET_CHIP_EN |
> + GEN_DEV_SET_CHNC_EN |
> + GEN_DEV_SET_CHND_EN |
> + FIELD_PREP(GEN_DEV_SET_OP_MODE_MASK,
> + GEN_DEV_SET_OP_MODE_USB));
> + nb7vpq904m_set_channel(nb7, NB7_CHNC, false);
> + nb7vpq904m_set_channel(nb7, NB7_CHND, false);
> + }
> + regmap_write(nb7->regmap, AUX_CC_REG, 0x2);
> +
> + return 0;
> +
> + default:
> + if (nb7->svid != USB_TYPEC_DP_SID)
> + return -EINVAL;
> +
> + break;
> + }
> +
> + /* DP Altmode Setup */
> +
> + regmap_write(nb7->regmap, AUX_CC_REG, reverse ? 0x1 : 0x0);
> +
> + switch (nb7->mode) {
> + case TYPEC_DP_STATE_C:
> + case TYPEC_DP_STATE_E:
> + /*
> + * Normal Orientation (CC1)
> + * A -> DP3
> + * B -> DP2
> + * C -> DP1
> + * D -> DP0
> + * Flipped Orientation (CC2)
> + * A -> DP0
> + * B -> DP1
> + * C -> DP2
> + * D -> DP3
> + */
> + regmap_write(nb7->regmap, GEN_DEV_SET_REG,
> + GEN_DEV_SET_CHIP_EN |
> + GEN_DEV_SET_CHNA_EN |
> + GEN_DEV_SET_CHNB_EN |
> + GEN_DEV_SET_CHNC_EN |
> + GEN_DEV_SET_CHND_EN |
> + FIELD_PREP(GEN_DEV_SET_OP_MODE_MASK,
> + GEN_DEV_SET_OP_MODE_DP_4LANE));
> + nb7vpq904m_set_channel(nb7, NB7_CHNA, true);
> + nb7vpq904m_set_channel(nb7, NB7_CHNB, true);
> + nb7vpq904m_set_channel(nb7, NB7_CHNC, true);
> + nb7vpq904m_set_channel(nb7, NB7_CHND, true);
> + break;
> +
> + case TYPEC_DP_STATE_D:
> + case TYPEC_DP_STATE_F:
> + regmap_write(nb7->regmap, GEN_DEV_SET_REG,
> + GEN_DEV_SET_CHIP_EN |
> + GEN_DEV_SET_CHNA_EN |
> + GEN_DEV_SET_CHNB_EN |
> + GEN_DEV_SET_CHNC_EN |
> + GEN_DEV_SET_CHND_EN |
> + FIELD_PREP(GEN_DEV_SET_OP_MODE_MASK,
> + reverse ^ nb7->swap_data_lanes ?
> + GEN_DEV_SET_OP_MODE_DP_CC2
> + : GEN_DEV_SET_OP_MODE_DP_CC1));
> +
> + /*
> + * Normal Orientation (CC1)
> + * A -> USB RX
> + * B -> USB TX
> + * C -> DP1
> + * D -> DP0
> + * Flipped Orientation (CC2)
> + * A -> DP0
> + * B -> DP1
> + * C -> USB TX
> + * D -> USB RX
> + *
> + * Reversed if data lanes are swapped
> + */
> + if (nb7->swap_data_lanes) {
> + nb7vpq904m_set_channel(nb7, NB7_CHNA, !reverse);
> + nb7vpq904m_set_channel(nb7, NB7_CHNB, !reverse);
> + nb7vpq904m_set_channel(nb7, NB7_CHNC, reverse);
> + nb7vpq904m_set_channel(nb7, NB7_CHND, reverse);
> + } else {
> + nb7vpq904m_set_channel(nb7, NB7_CHNA, reverse);
> + nb7vpq904m_set_channel(nb7, NB7_CHNB, reverse);
> + nb7vpq904m_set_channel(nb7, NB7_CHNC, !reverse);
> + nb7vpq904m_set_channel(nb7, NB7_CHND, !reverse);
> + }
> + break;
> +
> + default:
> + return -ENOTSUPP;
> + }
> +
> + return 0;
> +}
> +
> +static int nb7vpq904m_sw_set(struct typec_switch_dev *sw,
> + enum typec_orientation orientation)
> +{
> + struct nb7vpq904m *nb7 = typec_switch_get_drvdata(sw);
> + int ret;
> +
> + ret = typec_switch_set(nb7->typec_switch, orientation);
> + if (ret)
> + return ret;
> +
> + mutex_lock(&nb7->lock);
> +
> + if (nb7->orientation != orientation) {
> + nb7->orientation = orientation;
> +
> + ret = nb7vpq904m_set(nb7);
> + }
> +
> + mutex_unlock(&nb7->lock);
> +
> + return ret;
> +}
> +
> +static int nb7vpq904m_mux_set(struct typec_mux_dev *mux, struct typec_mux_state *state)
> +{
> + struct nb7vpq904m *nb7 = typec_mux_get_drvdata(mux);
> + int ret = 0;
> +
> + mutex_lock(&nb7->lock);
> +
> + if (nb7->mode != state->mode) {
> + nb7->mode = state->mode;
> +
> + if (state->alt)
> + nb7->svid = state->alt->svid;
> + else
> + nb7->svid = 0; // No SVID
> +
> + ret = nb7vpq904m_set(nb7);
> + }
> +
> + mutex_unlock(&nb7->lock);
> +
> + return ret;
> +}
> +
> +#if IS_ENABLED(CONFIG_DRM)
> +static int nb7vpq904m_bridge_attach(struct drm_bridge *bridge,
> + enum drm_bridge_attach_flags flags)
> +{
> + struct nb7vpq904m *nb7 = container_of(bridge, struct nb7vpq904m, bridge);
> + struct drm_bridge *next_bridge;
> +
> + if (!(flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR))
> + return -EINVAL;
> +
> + next_bridge = devm_drm_of_get_bridge(&nb7->client->dev, nb7->client->dev.of_node, 0, 0);
> + if (IS_ERR(next_bridge)) {
> + dev_err(&nb7->client->dev, "failed to acquire drm_bridge: %pe\n", next_bridge);
> + return PTR_ERR(next_bridge);
> + }
> +
> + return drm_bridge_attach(bridge->encoder, next_bridge, bridge,
> + DRM_BRIDGE_ATTACH_NO_CONNECTOR);
> +}
> +
> +static const struct drm_bridge_funcs nb7vpq904m_bridge_funcs = {
> + .attach = nb7vpq904m_bridge_attach,
> +};
> +
> +static int nb7vpq904m_register_bridge(struct nb7vpq904m *nb7)
> +{
> + nb7->bridge.funcs = &nb7vpq904m_bridge_funcs;
> + nb7->bridge.of_node = nb7->client->dev.of_node;
> +
> + return devm_drm_bridge_add(&nb7->client->dev, &nb7->bridge);
> +}
> +#else
> +static int nb7vpq904m_register_bridge(struct nb7vpq904m *nb7)
> +{
> + return 0;
> +}
> +#endif
This is what I feared of when we started mixing USB-C and drm bridges. A
part of me still thinks that the proper solution should involve OOB
notifications.
If we can expect a sizeable amount of such drivers, can we have a
generic drm helper for such passthrough bridges?
> +
> +static const struct regmap_config nb7_regmap = {
> + .max_register = 0x1f,
> + .reg_bits = 8,
> + .val_bits = 8,
> +};
> +
> +enum {
> + NORMAL_LANE_MAPPING,
> + INVERT_LANE_MAPPING,
> +};
> +
> +#define DATA_LANES_COUNT 4
> +
> +static const int supported_data_lane_mapping[][DATA_LANES_COUNT] = {
> + [NORMAL_LANE_MAPPING] = { 0, 1, 2, 3 },
> + [INVERT_LANE_MAPPING] = { 2, 3, 0, 1 },
> +};
> +
> +static int nb7vpq904m_parse_data_lanes_mapping(struct nb7vpq904m *nb7)
> +{
> + struct device_node *ep;
> + u32 data_lanes[4];
> + int ret, i, j;
> +
> + ep = of_graph_get_endpoint_by_regs(nb7->client->dev.of_node, 1, 0);
> +
> + if (ep) {
> + ret = of_property_count_u32_elems(ep, "data-lanes");
> + if (ret == -EINVAL)
> + /* Property isn't here, consider default mapping */
> + goto out_done;
> + if (ret < 0)
> + goto out_error;
> +
> + if (ret != DATA_LANES_COUNT) {
> + dev_err(&nb7->client->dev, "expected 4 data lanes\n");
> + ret = -EINVAL;
> + goto out_error;
> + }
> +
> + ret = of_property_read_u32_array(ep, "data-lanes", data_lanes, DATA_LANES_COUNT);
> + if (ret)
> + goto out_error;
> +
> + for (i = 0; i < ARRAY_SIZE(supported_data_lane_mapping); i++) {
> + for (j = 0; j < DATA_LANES_COUNT; j++) {
> + if (data_lanes[j] != supported_data_lane_mapping[i][j])
> + break;
> + }
> +
> + if (j == DATA_LANES_COUNT)
> + break;
> + }
> +
> + switch (i) {
> + case NORMAL_LANE_MAPPING:
> + break;
> + case INVERT_LANE_MAPPING:
> + nb7->swap_data_lanes = true;
> + dev_info(&nb7->client->dev, "using inverted data lanes mapping\n");
> + break;
> + default:
> + dev_err(&nb7->client->dev, "invalid data lanes mapping\n");
> + ret = -EINVAL;
> + goto out_error;
> + }
> + }
> +
> +out_done:
> + ret = 0;
> +
> +out_error:
> + of_node_put(ep);
> +
> + return ret;
> +}
> +
> +static int nb7vpq904m_probe(struct i2c_client *client)
> +{
> + struct device *dev = &client->dev;
> + struct typec_switch_desc sw_desc = { };
> + struct typec_mux_desc mux_desc = { };
> + struct nb7vpq904m *nb7;
> + int ret;
> +
> + nb7 = devm_kzalloc(dev, sizeof(*nb7), GFP_KERNEL);
> + if (!nb7)
> + return -ENOMEM;
> +
> + nb7->client = client;
> +
> + nb7->regmap = devm_regmap_init_i2c(client, &nb7_regmap);
> + if (IS_ERR(nb7->regmap)) {
> + dev_err(&client->dev, "Failed to allocate register map\n");
> + return PTR_ERR(nb7->regmap);
> + }
> +
> + nb7->mode = TYPEC_STATE_SAFE;
> + nb7->orientation = TYPEC_ORIENTATION_NONE;
> +
> + mutex_init(&nb7->lock);
> +
> + nb7->enable_gpio = devm_gpiod_get_optional(dev, "enable", GPIOD_OUT_LOW);
> + if (IS_ERR(nb7->enable_gpio))
> + return dev_err_probe(dev, PTR_ERR(nb7->enable_gpio),
> + "unable to acquire enable gpio\n");
> +
> + nb7->vcc_supply = devm_regulator_get_optional(dev, "vcc");
> + if (IS_ERR(nb7->vcc_supply))
> + return PTR_ERR(nb7->vcc_supply);
> +
> + nb7->typec_switch = fwnode_typec_switch_get(dev->fwnode);
> + if (IS_ERR(nb7->typec_switch))
> + return dev_err_probe(dev, PTR_ERR(nb7->typec_switch),
> + "failed to acquire orientation-switch\n");
> +
> + ret = nb7vpq904m_parse_data_lanes_mapping(nb7);
> + if (ret)
> + return ret;
> +
> + ret = regulator_enable(nb7->vcc_supply);
> + if (ret)
> + dev_warn(dev, "Failed to enable vcc: %d\n", ret);
> +
> + gpiod_set_value(nb7->enable_gpio, 1);
> +
> + ret = nb7vpq904m_register_bridge(nb7);
> + if (ret)
> + return ret;
> +
> + sw_desc.drvdata = nb7;
> + sw_desc.fwnode = dev->fwnode;
> + sw_desc.set = nb7vpq904m_sw_set;
> +
> + nb7->sw = typec_switch_register(dev, &sw_desc);
> + if (IS_ERR(nb7->sw))
> + return dev_err_probe(dev, PTR_ERR(nb7->sw), "Error registering typec switch\n");
> +
> + mux_desc.drvdata = nb7;
> + mux_desc.fwnode = dev->fwnode;
> + mux_desc.set = nb7vpq904m_mux_set;
> +
> + nb7->mux = typec_mux_register(dev, &mux_desc);
> + if (IS_ERR(nb7->mux)) {
> + typec_switch_unregister(nb7->sw);
> + return dev_err_probe(dev, PTR_ERR(nb7->mux), "Error registering typec mux\n");
> + }
> +
> + return 0;
> +}
> +
> +static void nb7vpq904m_remove(struct i2c_client *client)
> +{
> + struct nb7vpq904m *nb7 = i2c_get_clientdata(client);
> +
> + typec_mux_unregister(nb7->mux);
> + typec_switch_unregister(nb7->sw);
> +
> + gpiod_set_value(nb7->enable_gpio, 0);
> +
> + regulator_disable(nb7->vcc_supply);
> +}
> +
> +static const struct i2c_device_id nb7vpq904m_table[] = {
> + { "nb7vpq904m" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(i2c, nb7vpq904m_table);
> +
> +static const struct of_device_id nb7vpq904m_of_table[] = {
> + { .compatible = "onnn,nb7vpq904m" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, nb7vpq904m_of_table);
> +
> +static struct i2c_driver nb7vpq904m_driver = {
> + .driver = {
> + .name = "nb7vpq904m",
> + .of_match_table = nb7vpq904m_of_table,
> + },
> + .probe_new = nb7vpq904m_probe,
> + .remove = nb7vpq904m_remove,
> + .id_table = nb7vpq904m_table,
> +};
> +
> +module_i2c_driver(nb7vpq904m_driver);
> +
> +MODULE_AUTHOR("Dmitry Baryshkov <dmitry.baryshkov at linaro.org>");
> +MODULE_DESCRIPTION("OnSemi NB7VPQ904M Type-C driver");
> +MODULE_LICENSE("GPL");
>
--
With best wishes
Dmitry
More information about the dri-devel
mailing list