[PATCH V3 1/3] dt-bindings: panel: Add Anbernic RG353V-V2 panel compatible
Frank Oltmanns
frank at oltmanns.dev
Tue Jun 6 06:12:36 UTC 2023
Hi Chris,
hi Guido,
On 2023-04-26 at 16:54:46 +0200, Guido Günther <guido.gunther at puri.sm> wrote:
> Hi Chris,
> could you check if these two modifications by Frank of the init sequence
>
> https://lore.kernel.org/dri-devel/20230211171748.36692-2-frank@oltmanns.dev/
> https://lore.kernel.org/dri-devel/20230213123238.76889-2-frank@oltmanns.dev/
>
> work for your panel too?
I saw that Chris' patchset got accepted into drm-next, and I'm glad that
more panels will therefore work out of the box. But: Did anyone check if
the modifications I submitted in February and that Guido referenced
above work with the new panel?
Thanks,
Frank
> Cheers,
> -- Guido
>
> On Wed, Apr 26, 2023 at 09:32:11AM -0500, Chris Morgan wrote:
>> From: Chris Morgan <macromorgan at hotmail.com>
>>
>> The Anbernic RG353V-V2 panel is a 3.5 inch 640x480 MIPI-DSI LCD panel.
>> It's based on the ST7703 LCD controller just like rocktech,jh057n00900.
>> It's used in a 2nd revision of the Anbernic RG353V handheld gaming
>> device. Like the first revision of the RG353V the control chip is known
>> but the panel itself is unknown, so name it for the device.
>>
>> Signed-off-by: Chris Morgan <macromorgan at hotmail.com>
>> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
>> Acked-by: Guido Günther <agx at sigxcpu.org>
>> ---
>> .../devicetree/bindings/display/panel/rocktech,jh057n00900.yaml | 2 ++
>> 1 file changed, 2 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml
>> index 09b5eb7542f8..150e81090af2 100644
>> --- a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml
>> +++ b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml
>> @@ -20,6 +20,8 @@ allOf:
>> properties:
>> compatible:
>> enum:
>> + # Anberic RG353V-V2 5.0" 640x480 TFT LCD panel
>> + - anbernic,rg353v-panel-v2
>> # Rocktech JH057N00900 5.5" 720x1440 TFT LCD panel
>> - rocktech,jh057n00900
>> # Xingbangda XBD599 5.99" 720x1440 TFT LCD panel
>> --
>> 2.34.1
>>
>
> On Wed, Apr 26, 2023 at 09:32:12AM -0500, Chris Morgan wrote:
>> From: Chris Morgan <macromorgan at hotmail.com>
>>
>> A later revision of the datasheet for the ST7703 refers to this command
>> as "SETECO".
>>
>> Signed-off-by: Chris Morgan <macromorgan at hotmail.com>
>> Reviewed-by: Guido Günther <agx at sigxcpu.org>
>> ---
>> drivers/gpu/drm/panel/panel-sitronix-st7703.c | 5 ++---
>> 1 file changed, 2 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7703.c b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
>> index 6747ca237ced..fc55b5fbb67f 100644
>> --- a/drivers/gpu/drm/panel/panel-sitronix-st7703.c
>> +++ b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
>> @@ -41,8 +41,8 @@
>> #define ST7703_CMD_UNKNOWN_BF 0xBF
>> #define ST7703_CMD_SETSCR 0xC0
>> #define ST7703_CMD_SETPOWER 0xC1
>> +#define ST7703_CMD_SETECO 0xC6
>> #define ST7703_CMD_SETPANEL 0xCC
>> -#define ST7703_CMD_UNKNOWN_C6 0xC6
>> #define ST7703_CMD_SETGAMMA 0xE0
>> #define ST7703_CMD_SETEQ 0xE3
>> #define ST7703_CMD_SETGIP1 0xE9
>> @@ -249,8 +249,7 @@ static int xbd599_init_sequence(struct st7703 *ctx)
>> * ESD_DET_TIME_SEL = 0 frames
>> */);
>>
>> - /* Undocumented command. */
>> - mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_UNKNOWN_C6, 0x01, 0x00, 0xFF, 0xFF, 0x00);
>> + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETECO, 0x01, 0x00, 0xFF, 0xFF, 0x00);
>>
>> mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER,
>> 0x74, /* VBTHS, VBTLS: VGH = 17V, VBL = -11V */
>> --
>> 2.34.1
>>
>
> On Wed, Apr 26, 2023 at 09:32:13AM -0500, Chris Morgan wrote:
>> From: Chris Morgan <macromorgan at hotmail.com>
>>
>> The Anbernic RG353V-V2 is a 5 inch panel used in a new revision of the
>> Anbernic RG353V handheld gaming device. Add support for it.
>>
>> Unfortunately it appears this controller is not able to support 120hz
>> or 100hz mode like the first revision panel.
>>
>> Signed-off-by: Chris Morgan <macromorgan at hotmail.com>
>> Reviewed-by: Guido Günther <agx at sigxcpu.org>
>> ---
>> drivers/gpu/drm/panel/panel-sitronix-st7703.c | 97 +++++++++++++++++++
>> 1 file changed, 97 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7703.c b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
>> index fc55b5fbb67f..3aa31f3d6157 100644
>> --- a/drivers/gpu/drm/panel/panel-sitronix-st7703.c
>> +++ b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
>> @@ -28,6 +28,7 @@
>> /* Manufacturer specific Commands send via DSI */
>> #define ST7703_CMD_ALL_PIXEL_OFF 0x22
>> #define ST7703_CMD_ALL_PIXEL_ON 0x23
>> +#define ST7703_CMD_SETAPID 0xB1
>> #define ST7703_CMD_SETDISP 0xB2
>> #define ST7703_CMD_SETRGBIF 0xB3
>> #define ST7703_CMD_SETCYC 0xB4
>> @@ -42,11 +43,14 @@
>> #define ST7703_CMD_SETSCR 0xC0
>> #define ST7703_CMD_SETPOWER 0xC1
>> #define ST7703_CMD_SETECO 0xC6
>> +#define ST7703_CMD_SETIO 0xC7
>> +#define ST7703_CMD_SETCABC 0xC8
>> #define ST7703_CMD_SETPANEL 0xCC
>> #define ST7703_CMD_SETGAMMA 0xE0
>> #define ST7703_CMD_SETEQ 0xE3
>> #define ST7703_CMD_SETGIP1 0xE9
>> #define ST7703_CMD_SETGIP2 0xEA
>> +#define ST7703_CMD_UNKNOWN_EF 0xEF
>>
>> struct st7703 {
>> struct device *dev;
>> @@ -337,6 +341,98 @@ static const struct st7703_panel_desc xbd599_desc = {
>> .init_sequence = xbd599_init_sequence,
>> };
>>
>> +static int rg353v2_init_sequence(struct st7703 *ctx)
>> +{
>> + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
>> +
>> + /*
>> + * Init sequence was supplied by the panel vendor.
>> + */
>> +
>> + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETEXTC, 0xf1, 0x12, 0x83);
>> + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETAPID, 0x00, 0x00, 0x00,
>> + 0xda, 0x80);
>> + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETDISP, 0x00, 0x13, 0x70);
>> + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETRGBIF, 0x10, 0x10, 0x28,
>> + 0x28, 0x03, 0xff, 0x00, 0x00, 0x00, 0x00);
>> + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETCYC, 0x80);
>> + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETBGP, 0x0a, 0x0a);
>> + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETVCOM, 0x92, 0x92);
>> + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER_EXT, 0x25, 0x22,
>> + 0xf0, 0x63);
>> + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETMIPI, 0x33, 0x81, 0x05,
>> + 0xf9, 0x0e, 0x0e, 0x20, 0x00, 0x00, 0x00, 0x00,
>> + 0x00, 0x00, 0x00, 0x44, 0x25, 0x00, 0x90, 0x0a,
>> + 0x00, 0x00, 0x01, 0x4f, 0x01, 0x00, 0x00, 0x37);
>> + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETVDC, 0x47);
>> + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_UNKNOWN_BF, 0x02, 0x11, 0x00);
>> + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETSCR, 0x73, 0x73, 0x50, 0x50,
>> + 0x00, 0x00, 0x12, 0x50, 0x00);
>> + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER, 0x53, 0xc0, 0x32,
>> + 0x32, 0x77, 0xe1, 0xdd, 0xdd, 0x77, 0x77, 0x33,
>> + 0x33);
>> + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETECO, 0x82, 0x00, 0xbf, 0xff,
>> + 0x00, 0xff);
>> + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETIO, 0xb8, 0x00, 0x0a, 0x00,
>> + 0x00, 0x00);
>> + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETCABC, 0x10, 0x40, 0x1e,
>> + 0x02);
>> + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETPANEL, 0x0b);
>> + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETGAMMA, 0x00, 0x07, 0x0d,
>> + 0x37, 0x35, 0x3f, 0x41, 0x44, 0x06, 0x0c, 0x0d,
>> + 0x0f, 0x11, 0x10, 0x12, 0x14, 0x1a, 0x00, 0x07,
>> + 0x0d, 0x37, 0x35, 0x3f, 0x41, 0x44, 0x06, 0x0c,
>> + 0x0d, 0x0f, 0x11, 0x10, 0x12, 0x14, 0x1a);
>> + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETEQ, 0x07, 0x07, 0x0b, 0x0b,
>> + 0x0b, 0x0b, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00,
>> + 0xc0, 0x10);
>> + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETGIP1, 0xc8, 0x10, 0x02, 0x00,
>> + 0x00, 0xb0, 0xb1, 0x11, 0x31, 0x23, 0x28, 0x80,
>> + 0xb0, 0xb1, 0x27, 0x08, 0x00, 0x04, 0x02, 0x00,
>> + 0x00, 0x00, 0x00, 0x04, 0x02, 0x00, 0x00, 0x00,
>> + 0x88, 0x88, 0xba, 0x60, 0x24, 0x08, 0x88, 0x88,
>> + 0x88, 0x88, 0x88, 0x88, 0x88, 0xba, 0x71, 0x35,
>> + 0x18, 0x88, 0x88, 0x88, 0x88, 0x88, 0x00, 0x00,
>> + 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
>> + 0x00, 0x00, 0x00);
>> + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETGIP2, 0x97, 0x0a, 0x82, 0x02,
>> + 0x03, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
>> + 0x81, 0x88, 0xba, 0x17, 0x53, 0x88, 0x88, 0x88,
>> + 0x88, 0x88, 0x88, 0x80, 0x88, 0xba, 0x06, 0x42,
>> + 0x88, 0x88, 0x88, 0x88, 0x88, 0x88, 0x23, 0x00,
>> + 0x00, 0x02, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00,
>> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
>> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
>> + 0x00);
>> + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_UNKNOWN_EF, 0xff, 0xff, 0x01);
>> +
>> + return 0;
>> +}
>> +
>> +static const struct drm_display_mode rg353v2_mode = {
>> + .hdisplay = 640,
>> + .hsync_start = 640 + 40,
>> + .hsync_end = 640 + 40 + 2,
>> + .htotal = 640 + 40 + 2 + 80,
>> + .vdisplay = 480,
>> + .vsync_start = 480 + 18,
>> + .vsync_end = 480 + 18 + 2,
>> + .vtotal = 480 + 18 + 2 + 28,
>> + .clock = 24150,
>> + .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
>> + .width_mm = 70,
>> + .height_mm = 57,
>> +};
>> +
>> +static const struct st7703_panel_desc rg353v2_desc = {
>> + .mode = &rg353v2_mode,
>> + .lanes = 4,
>> + .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
>> + MIPI_DSI_MODE_NO_EOT_PACKET | MIPI_DSI_MODE_LPM,
>> + .format = MIPI_DSI_FMT_RGB888,
>> + .init_sequence = rg353v2_init_sequence,
>> +};
>> +
>> static int st7703_enable(struct drm_panel *panel)
>> {
>> struct st7703 *ctx = panel_to_st7703(panel);
>> @@ -597,6 +693,7 @@ static void st7703_remove(struct mipi_dsi_device *dsi)
>> }
>>
>> static const struct of_device_id st7703_of_match[] = {
>> + { .compatible = "anbernic,rg353v-panel-v2", .data = &rg353v2_desc },
>> { .compatible = "rocktech,jh057n00900", .data = &jh057n00900_panel_desc },
>> { .compatible = "xingbangda,xbd599", .data = &xbd599_desc },
>> { /* sentinel */ }
>> --
>> 2.34.1
>>
More information about the dri-devel
mailing list