[PATCH v7 0/8] drm/tidss: Use new connector model for tidss
neil.armstrong at linaro.org
neil.armstrong at linaro.org
Tue Jun 6 09:48:27 UTC 2023
On 06/06/2023 11:46, Aradhya Bhatia wrote:
> Hi Neil,
>
> Thank you for reviewing the previous patches!
>
> On 06-Jun-23 14:37, Neil Armstrong wrote:
>> Hi,
>>
>> On 06/06/2023 10:21, Aradhya Bhatia wrote:
>>> Hi all,
>>>
>>> I have picked up this long standing series from Nikhil Devshatwar[1].
>>>
>>> This series moves the tidss to using new connectoe model, where the SoC
>>> driver (tidss) creates the connector and all the bridges are attached
>>> with the flag DRM_BRIDGE_ATTACH_NO_CONNECTOR. It also now creates bridge
>>> to support format negotiation and and 'simple' encoder to expose it to
>>> the userspace.
>>>
>>> Since the bridges do not create the connector, the bus_format and
>>> bus_flag is set via atomic hooks.
>>>
>>> Support format negotiations in the tfp410, sii902x and mhdp-8546 bridge
>>> drivers as a first step before moving the connector model.
>>>
>>> These patches were tested on AM625-SK EVM, AM625 SoC based BeaglePlay,
>>> and J721E-SK. Display support for AM625 SoC has not been added upstream
>>> and is a WIP. To test this series on AM625 based platforms, basic
>>> display support patches, (for driver + devicetree), can be found in
>>> the "next_AttachNoConn-v2" branch on my github fork[2].
>>
>> I can apply all bridge patches right now so only the tidss change remain,
>> is that ok for you ?
>>
>
> While the bridge patches and the tidss patch can be separately built
> without any issue, the tidss functionality will break if only the bridge
> patches get picked up, and not the tidss.
>
> Would it be possible for you to pick all the patches together once Tomi
> acks the tidss patch?
Sure
Neil
>
>
> Regards
> Aradhya
>
>>
>>>
>>> Thanks,
>>> Aradhya
>>>
>>> [1]: https://patchwork.freedesktop.org/series/82765/#rev5
>>> [2]: https://github.com/aradhya07/linux-ab/tree/next_AttachNoConn-v2
>>>
>>> Change Log:
>>> V6 -> V7
>>> - Rebase and cosmetic changes.
>>> - Drop the output format check condition for mhdp8546 and hence,
>>> drop Tomi Valkeinen's R-b tag.
>>> - Added tags wherever suggested.
>>>
>>> V5 -> V6
>>> - Rebase and cosmetic changes
>>> - Dropped the output format check condition for tfp410 and hence,
>>> dropped Tomi Valkeinen's and Laurent Pinchart's R-b tags.
>>> - Based on Boris Brezillon's comments: dropped patches 5 and 6 from
>>> the series and instead created a single patch that,
>>> 1. Creates tidss bridge for format negotiation.
>>> 2. Creates 'simple' encoder for userspace exposure.
>>> 3. Creates a tidss connector.
>>> 4. Attaches the next-bridge to encoder with the
>>> DRM_BRIDGE_ATTACH_NO_CONNECTOR flag.
>>> - Add format negotiation support for sii902x driver.
>>>
>>> Previous versions:
>>> V1 to V6: https://patchwork.freedesktop.org/series/82765/
>>>
>>> Aradhya Bhatia (3):
>>> drm/bridge: sii902x: Support format negotiation hooks
>>> drm/bridge: sii902x: Set input_bus_flags in atomic_check
>>> drm/tidss: Update encoder/bridge chain connect model
>>>
>>> Nikhil Devshatwar (5):
>>> drm/bridge: tfp410: Support format negotiation hooks
>>> drm/bridge: tfp410: Set input_bus_flags in atomic_check
>>> drm/bridge: mhdp8546: Add minimal format negotiation
>>> drm/bridge: mhdp8546: Set input_bus_flags from atomic_check
>>> drm/bridge: cdns-mhdp8546: Fix the interrupt enable/disable
>>>
>>> .../drm/bridge/cadence/cdns-mhdp8546-core.c | 77 ++++++----
>>> .../drm/bridge/cadence/cdns-mhdp8546-core.h | 2 +-
>>> .../drm/bridge/cadence/cdns-mhdp8546-j721e.c | 9 +-
>>> .../drm/bridge/cadence/cdns-mhdp8546-j721e.h | 2 +-
>>> drivers/gpu/drm/bridge/sii902x.c | 40 +++++
>>> drivers/gpu/drm/bridge/ti-tfp410.c | 43 ++++++
>>> drivers/gpu/drm/tidss/tidss_encoder.c | 140 +++++++++++-------
>>> drivers/gpu/drm/tidss/tidss_encoder.h | 5 +-
>>> drivers/gpu/drm/tidss/tidss_kms.c | 12 +-
>>> 9 files changed, 235 insertions(+), 95 deletions(-)
>>>
>>
More information about the dri-devel
mailing list