[PATCH 1/9] dt-bindings: display: Add yamls for JH7110 display subsystem
Krzysztof Kozlowski
krzysztof.kozlowski at linaro.org
Wed Jun 7 07:35:13 UTC 2023
On 02/06/2023 09:40, Keith Zhao wrote:
> Add bindings for JH7110 display subsystem which
> has a display controller verisilicon dc8200
> and an HDMI interface.
>
> Signed-off-by: Keith Zhao <keith.zhao at starfivetech.com>
> ---
> .../display/verisilicon/starfive-hdmi.yaml | 93 +++++++++++++++
> .../display/verisilicon/verisilicon-dc.yaml | 110 ++++++++++++++++++
> .../display/verisilicon/verisilicon-drm.yaml | 42 +++++++
> .../devicetree/bindings/vendor-prefixes.yaml | 2 +
> MAINTAINERS | 7 ++
> 5 files changed, 254 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/verisilicon/starfive-hdmi.yaml
> create mode 100644 Documentation/devicetree/bindings/display/verisilicon/verisilicon-dc.yaml
> create mode 100644 Documentation/devicetree/bindings/display/verisilicon/verisilicon-drm.yaml
>
> diff --git a/Documentation/devicetree/bindings/display/verisilicon/starfive-hdmi.yaml b/Documentation/devicetree/bindings/display/verisilicon/starfive-hdmi.yaml
> new file mode 100644
> index 000000000000..c30b7954a355
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/verisilicon/starfive-hdmi.yaml
Filename matching compatible.
> @@ -0,0 +1,93 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/verisilicon/starfive-hdmi.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: StarFive HDMI transmiter
> +
> +description:
> + The StarFive SoC uses the HDMI signal transmiter based on innosilicon IP
> + to generate HDMI signal from its input and transmit the signal to the screen.
> +
> +maintainers:
> + - Keith Zhao <keith.zhao at starfivetech.com>
> + - ShengYang Chen <shengyang.chen at starfivetech.com>
> +
> +properties:
> + compatible:
> + const: starfive,hdmi
Conor already commented on this.
> +
> + reg:
> + minItems: 1
> +
> + interrupts:
> + items:
> + - description: The HDMI hot plug detection interrupt.
> +
> + clocks:
> + items:
> + - description: System clock of HDMI module.
> + - description: Mclk clock of HDMI audio.
> + - description: Bclk clock of HDMI audio.
> + - description: Pixel clock generated by HDMI module.
> +
> + clock-names:
> + items:
> + - const: sysclk
> + - const: mclk
> + - const: bclk
> + - const: pclk
> +
> + resets:
> + items:
> + - description: Reset for HDMI module.
> +
> + reset-names:
> + items:
> + - const: hdmi_tx
> +
> + '#sound-dai-cells':
> + const: 0
> +
> + port:
> + $ref: /schemas/graph.yaml#/properties/port
> + description:
> + Port node with one endpoint connected to a display connector node.
One port, so how do you get data? From where does it come?
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - clocks
> + - clock-names
> + - resets
> + - reset-names
> + - '#sound-dai-cells'
> + - port
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + hdmi: hdmi at 29590000 {
> + compatible = "starfive,hdmi";
> + reg = <0x29590000 0x4000>;
> + interrupts = <99>;
> + clocks = <&voutcrg 17>,
> + <&voutcrg 15>,
> + <&voutcrg 16>,
> + <&hdmitx0_pixelclk>;
> + clock-names = "sysclk", "mclk","bclk","pclk";
> + resets = <&voutcrg 9>;
> + reset-names = "hdmi_tx";
> + #sound-dai-cells = <0>;
> + hdmi_in: port {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + hdmi_input: endpoint at 0 {
> + reg = <0>;
> + remote-endpoint = <&dc_out_dpi0>;
Mixed up indentation.
> + };
> + };
> + };
> diff --git a/Documentation/devicetree/bindings/display/verisilicon/verisilicon-dc.yaml b/Documentation/devicetree/bindings/display/verisilicon/verisilicon-dc.yaml
> new file mode 100644
> index 000000000000..1322502c4cde
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/verisilicon/verisilicon-dc.yaml
Same problem.
> @@ -0,0 +1,110 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/verisilicon/verisilicon-dc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: StarFive display controller
> +
> +description:
> + The StarFive SoC uses the display controller based on Verisilicon IP
> + to transfer the image data from a video memory
> + buffer to an external LCD interface.
> +
> +maintainers:
> + - Keith Zhao <keith.zhao at starfivetech.com>
> + - ShengYang Chen <shengyang.chen at starfivetech.com>
> +
> +properties:
> + compatible:
> + const: verisilicon,dc8200
> +
> + reg:
> + maxItems: 3
> +
> + interrupts:
> + items:
> + - description: The interrupt will be generated when DC finish one frame
> +
> + clocks:
> + items:
> + - description: Clock for display system noc bus.
> + - description: Pixel clock for display channel 0.
> + - description: Pixel clock for display channel 1.
> + - description: Clock for axi interface of display controller.
> + - description: Core clock for display controller.
> + - description: Clock for ahb interface of display controller.
> + - description: External HDMI pixel clock.
> + - description: Parent clock for pixel clock
> +
> + clock-names:
> + items:
> + - const: clk_vout_noc_disp
Why do you need "clk_" prefixes? Drop.
> + - const: clk_vout_pix0
> + - const: clk_vout_pix1
> + - const: clk_vout_axi
> + - const: clk_vout_core
> + - const: clk_vout_vout_ahb
> + - const: hdmitx0_pixel
> + - const: clk_vout_dc8200
> +
> + resets:
> + items:
> + - description: Reset for axi interface of display controller.
> + - description: Reset for ahb interface of display controller.
> + - description: Core reset of display controller.
> +
> + reset-names:
> + items:
> + - const: rst_vout_axi
Drop rst_
> + - const: rst_vout_ahb
> + - const: rst_vout_core
> +
> + port:
> + $ref: /schemas/graph.yaml#/properties/port
> + description:
> + Port node with one endpoint connected to a hdmi node.
Oh really? But your HDMI does not allow it! Submit DTS user of all this
so we can see it.
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - clocks
> + - clock-names
> + - resets
> + - reset-names
> + - port
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + dc8200: dc8200 at 29400000 {
Node names should be generic. See also explanation and list of examples
in DT specification:
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
> + compatible = "verisilicon,dc8200";
> + reg = <0x29400000 0x100>,
> + <0x29400800 0x2000>,
> + <0x295B0000 0x90>;
Lowercase hex
> + interrupts = <95>;
> + clocks = <&syscrg 60>,
> + <&voutcrg 7>,
> + <&voutcrg 8>,
> + <&voutcrg 4>,
> + <&voutcrg 5>,
> + <&voutcrg 6>,
> + <&hdmitx0_pixelclk>,
> + <&voutcrg 1>;
> + clock-names = "clk_vout_noc_disp", "clk_vout_pix0", "clk_vout_pix1", "clk_vout_axi",
> + "clk_vout_core", "clk_vout_vout_ahb", "hdmitx0_pixel","clk_vout_dc8200";
> + resets = <&voutcrg 0>,
> + <&voutcrg 1>,
> + <&voutcrg 2>;
> + reset-names = "rst_vout_axi","rst_vout_ahb","rst_vout_core";
> + dc_out: port {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + dc_out_dpi0: endpoint at 0 {
> + reg = <0>;
> + remote-endpoint = <&hdmi_input>;
> + };
> + };
> + };
> diff --git a/Documentation/devicetree/bindings/display/verisilicon/verisilicon-drm.yaml b/Documentation/devicetree/bindings/display/verisilicon/verisilicon-drm.yaml
> new file mode 100644
> index 000000000000..aed8d4af2c55
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/verisilicon/verisilicon-drm.yaml
Same comments
> @@ -0,0 +1,42 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/verisilicon/verisilicon-drm.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Verisilicon DRM master device
What is DRM? If Linux thingy, then it does not suit bindings.
Give it proper description of hardware.
> +
> +maintainers:
> + - Keith Zhao <keith.zhao at starfivetech.com>
> + - ShengYang Chen <shengyang.chen at starfivetech.com>
> +
> +description: |
Do not need '|' unless you need to preserve formatting.
> + The Verisilicon DRM master device is a virtual device needed to list all
We do not describe virtual devices in bindings.
NAK.
> + display controller or other display interface nodes that comprise the
> + graphics subsystem.
> +
> +properties:
> + compatible:
> + const: verisilicon,display-subsystem
> +
> + ports:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
Ports is an object, not array. Drop entire property. It's just wrong.
Best regards,
Krzysztof
More information about the dri-devel
mailing list