[PATCH v4 0/3] drm/panel: add fannal c3004 panel

[Paulo Pavacic]

Fannal C3004 is a 2 lane MIPI DSI 480x800 panel which requires initialization with DSI DCS
commands. After few initialization commands delay is required.

Paulo Pavacic (3):
  dt-bindings: add fannal vendor prefix
  dt-bindings: display: panel: add fannal,c3004
  drm/panel-fannal-c3004: Add fannal c3004 DSI panel

 .../bindings/display/panel/fannal,c3004.yaml  |  78 +++++
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 MAINTAINERS                                   |   6 +
 drivers/gpu/drm/panel/Kconfig                 |  11 +
 drivers/gpu/drm/panel/Makefile                |   1 +
 drivers/gpu/drm/panel/panel-fannal-c3004.c    | 314 ++++++++++++++++++
 6 files changed, 412 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/fannal,c3004.yaml
 create mode 100644 drivers/gpu/drm/panel/panel-fannal-c3004.c

-- 
2.40.1