[PATCH v5 2/5] drm/msm/dsi: Adjust pclk rate for compression

[Marijn Suijten]

Same title suggestion as earlier: s/adjust/reduce

On 2023-05-22 18:08:56, Jessica Zhang wrote:
> Adjust the pclk rate to divide hdisplay by the compression ratio when DSC
> is enabled.
> 
> Signed-off-by: Jessica Zhang <quic_jesszhan at quicinc.com>
> ---
>  drivers/gpu/drm/msm/dsi/dsi_host.c | 21 ++++++++++++++++++---
>  1 file changed, 18 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
> index a448931af804..88f370dd2ea1 100644
> --- a/drivers/gpu/drm/msm/dsi/dsi_host.c
> +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
> @@ -561,7 +561,18 @@ void dsi_link_clk_disable_v2(struct msm_dsi_host *msm_host)
>  	clk_disable_unprepare(msm_host->byte_clk);
>  }
>  
> -static unsigned long dsi_get_pclk_rate(const struct drm_display_mode *mode, bool is_bonded_dsi)
> +static unsigned long dsi_adjust_compressed_pclk(const struct drm_display_mode *mode,

Nit: adjust_pclk_for_compression

As discussed before we realized that this change is more-or-less a hack,
since downstream calculates pclk quite differently - at least for
command-mode panels.  Do you still intend to land this patch this way,
or go the proper route by introducing the right math from the get-go?
Or is the math at least correct for video-mode panels?

This function requires a documentation comment to explain that all.

> +		const struct drm_dsc_config *dsc)
> +{
> +	int new_hdisplay = DIV_ROUND_UP(mode->hdisplay * drm_dsc_get_bpp_int(dsc),

This sounds like a prime candidate for msm_dsc_get_bytes_per_line(), if
bits_per_component==8 is assumed.  In fact, it then becomes identical
to the following line in dsi_host.c which you added previously:

	hdisplay = DIV_ROUND_UP(msm_dsc_get_bytes_per_line(msm_host->dsc), 3);

If not, what is the difference between these two calculations?  Maybe
they both need to be in a properly-named helper.

> +			dsc->bits_per_component * 3);

As we established in the drm/msm issue [2] there is currently a
confusion whether this /3 (and the /3 in dsi_timing_setup) come from the
ratio between dsi_get_bpp() and dsc->bpp or something else.  Can you
clarify that with constants and comments?

[2]: https://gitlab.freedesktop.org/drm/msm/-/issues/24

> +
> +	return (new_hdisplay + (mode->htotal - mode->hdisplay))
> +			* mode->vtotal * drm_mode_vrefresh(mode);

As clarified in [1] I was not necessarily suggesting to move this math
to a separate helper, but to also use a few more properly-named
intermediate variables to not have multi-line math and self-documenting
code.  These lines could be split to be much more clear.

[1]: https://lore.kernel.org/linux-arm-msm/u4x2vldkzsokfcpbkz3dtwcllbdk4ljcz6kzuaxt5frx6g76o5@uku6abewvye7/

> +}
> +
> +static unsigned long dsi_get_pclk_rate(const struct drm_display_mode *mode,
> +		const struct drm_dsc_config *dsc, bool is_bonded_dsi)
>  {
>  	unsigned long pclk_rate;
>  
> @@ -576,6 +587,10 @@ static unsigned long dsi_get_pclk_rate(const struct drm_display_mode *mode, bool
>  	if (is_bonded_dsi)
>  		pclk_rate /= 2;
>  
> +	/* If DSC is enabled, divide hdisplay by compression ratio */
> +	if (dsc)
> +		pclk_rate = dsi_adjust_compressed_pclk(mode, dsc);

The confusion with this comment (and the reason the aforementioned
discussion [2] carried on so long) stems from the fact a division makes
sense for a bit/byte clock, but not for a pixel clock: we still intend
to send the same number of pixels, just spending less bytes on them.  So
as you clarify the /3 above, can you also clarify that here or drop this
comment completely when the function is correctly documented instead?

- Marijn

> +
>  	return pclk_rate;
>  }
>  
> @@ -585,7 +600,7 @@ unsigned long dsi_byte_clk_get_rate(struct mipi_dsi_host *host, bool is_bonded_d
>  	struct msm_dsi_host *msm_host = to_msm_dsi_host(host);
>  	u8 lanes = msm_host->lanes;
>  	u32 bpp = dsi_get_bpp(msm_host->format);
> -	unsigned long pclk_rate = dsi_get_pclk_rate(mode, is_bonded_dsi);
> +	unsigned long pclk_rate = dsi_get_pclk_rate(mode, msm_host->dsc, is_bonded_dsi);
>  	unsigned long pclk_bpp;
>  
>  	if (lanes == 0) {
> @@ -604,7 +619,7 @@ unsigned long dsi_byte_clk_get_rate(struct mipi_dsi_host *host, bool is_bonded_d
>  
>  static void dsi_calc_pclk(struct msm_dsi_host *msm_host, bool is_bonded_dsi)
>  {
> -	msm_host->pixel_clk_rate = dsi_get_pclk_rate(msm_host->mode, is_bonded_dsi);
> +	msm_host->pixel_clk_rate = dsi_get_pclk_rate(msm_host->mode, msm_host->dsc, is_bonded_dsi);
>  	msm_host->byte_clk_rate = dsi_byte_clk_get_rate(&msm_host->base, is_bonded_dsi,
>  							msm_host->mode);
>  
> 
> -- 
> 2.40.1
>