[PATCH V2 7/7] drm/amd/pm: enable Wifi RFI mitigation feature support for SMU13.0.7

Evan Quan evan.quan at amd.com
Fri Jun 9 07:28:46 UTC 2023


Fulfill the SMU13.0.7 support for Wifi RFI mitigation feature.

Signed-off-by: Evan Quan <evan.quan at amd.com>
---
 .../drm/amd/pm/swsmu/smu13/smu_v13_0_7_ppt.c  | 59 +++++++++++++++++++
 1 file changed, 59 insertions(+)

diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_7_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_7_ppt.c
index 98a33f8ee209..16c1c04e2034 100644
--- a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_7_ppt.c
+++ b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_7_ppt.c
@@ -125,6 +125,7 @@ static struct cmn2asic_msg_mapping smu_v13_0_7_message_map[SMU_MSG_MAX_COUNT] =
 	MSG_MAP(ArmD3,				PPSMC_MSG_ArmD3,                       0),
 	MSG_MAP(AllowGpo,			PPSMC_MSG_SetGpoAllow,           0),
 	MSG_MAP(GetPptLimit,			PPSMC_MSG_GetPptLimit,                 0),
+	MSG_MAP(EnableUCLKShadow,		PPSMC_MSG_EnableUCLKShadow,            0),
 };
 
 static struct cmn2asic_mapping smu_v13_0_7_clk_map[SMU_CLK_COUNT] = {
@@ -205,6 +206,7 @@ static struct cmn2asic_mapping smu_v13_0_7_table_map[SMU_TABLE_COUNT] = {
 	TAB_MAP(DRIVER_SMU_CONFIG),
 	TAB_MAP(ACTIVITY_MONITOR_COEFF),
 	[SMU_TABLE_COMBO_PPTABLE] = {1, TABLE_COMBO_PPTABLE},
+	TAB_MAP(WIFIBAND),
 };
 
 static struct cmn2asic_mapping smu_v13_0_7_pwr_src_map[SMU_POWER_SOURCE_COUNT] = {
@@ -487,6 +489,9 @@ static int smu_v13_0_7_tables_init(struct smu_context *smu)
 	               AMDGPU_GEM_DOMAIN_VRAM);
 	SMU_TABLE_INIT(tables, SMU_TABLE_COMBO_PPTABLE, MP0_MP1_DATA_REGION_SIZE_COMBOPPTABLE,
 			PAGE_SIZE, AMDGPU_GEM_DOMAIN_VRAM);
+	SMU_TABLE_INIT(tables, SMU_TABLE_WIFIBAND,
+		       sizeof(WifiBandEntryTable_t), PAGE_SIZE,
+		       AMDGPU_GEM_DOMAIN_VRAM);
 
 	smu_table->metrics_table = kzalloc(sizeof(SmuMetricsExternal_t), GFP_KERNEL);
 	if (!smu_table->metrics_table)
@@ -1721,6 +1726,57 @@ static int smu_v13_0_7_set_df_cstate(struct smu_context *smu,
 					       NULL);
 }
 
+static bool smu_v13_0_7_wbrf_support_check(struct smu_context *smu)
+{
+	return smu->smc_fw_version > 0x00524600;
+}
+
+static int smu_v13_0_7_set_wbrf_exclusion_ranges(struct smu_context *smu,
+						 struct exclusion_range *exclusion_ranges)
+{
+	WifiBandEntryTable_t wifi_bands;
+	int valid_entries = 0;
+	int ret, i;
+
+	memset(&wifi_bands, 0, sizeof(wifi_bands));
+	for (i = 0; i < ARRAY_SIZE(wifi_bands.WifiBandEntry); i++) {
+		if (!exclusion_ranges[i].start &&
+		    !exclusion_ranges[i].end)
+			break;
+
+		/* PMFW expects the inputs to be in Mhz unit */
+		wifi_bands.WifiBandEntry[valid_entries].LowFreq =
+			DIV_ROUND_DOWN_ULL(exclusion_ranges[i].start, HZ_IN_MHZ);
+		wifi_bands.WifiBandEntry[valid_entries++].HighFreq =
+			DIV_ROUND_UP_ULL(exclusion_ranges[i].end, HZ_IN_MHZ);
+	}
+	wifi_bands.WifiBandEntryNum = valid_entries;
+
+	/*
+	 * Per confirm with PMFW team, WifiBandEntryNum = 0 is a valid setting.
+	 * Considering the scenarios below:
+	 * - At first the wifi device adds an exclusion range e.g. (2400,2500) to
+	 *   BIOS and our driver gets notified. We will set WifiBandEntryNum = 1
+	 *   and pass the WifiBandEntry (2400, 2500) to PMFW.
+	 *
+	 * - Later the wifi device removes the wifiband list added above and
+	 *   our driver gets notified again. At this time, driver will set
+	 *   WifiBandEntryNum = 0 and pass an empty WifiBandEntry list to PMFW.
+	 *   - PMFW may still need to do some uclk shadow update(e.g. switching
+	 *     from shadow clock back to primary clock) on receiving this.
+	 */
+
+	ret = smu_cmn_update_table(smu,
+				   SMU_TABLE_WIFIBAND,
+				   0,
+				   (void *)(&wifi_bands),
+				   true);
+	if (ret)
+		dev_err(smu->adev->dev, "Failed to set wifiband!");
+
+	return ret;
+}
+
 static const struct pptable_funcs smu_v13_0_7_ppt_funcs = {
 	.get_allowed_feature_mask = smu_v13_0_7_get_allowed_feature_mask,
 	.set_default_dpm_table = smu_v13_0_7_set_default_dpm_table,
@@ -1786,6 +1842,9 @@ static const struct pptable_funcs smu_v13_0_7_ppt_funcs = {
 	.set_mp1_state = smu_v13_0_7_set_mp1_state,
 	.set_df_cstate = smu_v13_0_7_set_df_cstate,
 	.gpo_control = smu_v13_0_gpo_control,
+	.is_asic_wbrf_supported = smu_v13_0_7_wbrf_support_check,
+	.enable_uclk_shadow = smu_v13_0_enable_uclk_shadow,
+	.set_wbrf_exclusion_ranges = smu_v13_0_7_set_wbrf_exclusion_ranges,
 };
 
 void smu_v13_0_7_set_ppt_funcs(struct smu_context *smu)
-- 
2.34.1



More information about the dri-devel mailing list