[PATCH v2 2/5] dt-bindings: display: ssd1307fb: Remove default width and height values

[Conor Dooley]

On Sat, Jun 10, 2023 at 07:51:35PM +0200, Javier Martinez Canillas wrote:
> Conor Dooley <conor at kernel.org> writes:
> 
> > On Fri, Jun 09, 2023 at 07:09:37PM +0200, Javier Martinez Canillas wrote:
> >> A default resolution in the ssd130x driver isn't set to an arbitrary 96x16
> >> anymore. Instead is set to a width and height that's controller dependent.
> >
> > Did that change to the driver not break backwards compatibility with
> > existing devicetrees that relied on the default values to get 96x16?
> >
> 
> It would but I don't think it is an issue in pratice. Most users of these
> panels use one of the multiple libraries on top of the spidev interface.
> 
> For the small userbase that don't, I believe that they will use the rpif
> kernel and ssd1306-overlay.dtbo DTB overlay, which defaults to width=128
> and height=64 [1]. So those users will have to explicitly set a width and
> height for a 96x16 panel anyways.
> 
> The intersection of users that have a 96x16 panel, assumed that default
> and consider the DTB a stable ABI, and only update their kernel but not
> the  DTB should be very small IMO.

It's the adding of new defaults that makes it a bit messier, since you
can't even revert without potentially breaking a newer user. I'd be more
inclined to require the properties, rather change their defaults in the
binding, lest there are people relying on them.
If you and the other knowledgeable folk in the area really do know such
users do not exist then I suppose it is fine to do.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20230610/a90180ad/attachment.sig>