[PATCH 3/7] drm/panel: sitronix-st7789v: Specify the expected bus format

[Sam Ravnborg]

On Fri, Jun 09, 2023 at 04:59:47PM +0200, Miquel Raynal wrote:
> The LCD controller supports RGB444, RGB565 and RGB888. The value that is
> written in the COLMOD register indicates using RGB888, so let's clearly
> specify the in-use bus format.

Confused.
MEDIA_BUS_FMT_RGB666_1X18 assumes 6 bits per color.
But RGB888 is 8 bits per color.

Something that I have forgotten, or is this inconsistent?

	Sam

> 
> Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com>
> ---
>  drivers/gpu/drm/panel/panel-sitronix-st7789v.c | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7789v.c b/drivers/gpu/drm/panel/panel-sitronix-st7789v.c
> index e9ca7ebb458a..0abb45bea18d 100644
> --- a/drivers/gpu/drm/panel/panel-sitronix-st7789v.c
> +++ b/drivers/gpu/drm/panel/panel-sitronix-st7789v.c
> @@ -6,6 +6,7 @@
>  #include <linux/delay.h>
>  #include <linux/gpio/consumer.h>
>  #include <linux/module.h>
> +#include <linux/media-bus-format.h>
>  #include <linux/regulator/consumer.h>
>  #include <linux/spi/spi.h>
>  
> @@ -170,6 +171,7 @@ static int st7789v_get_modes(struct drm_panel *panel,
>  			     struct drm_connector *connector)
>  {
>  	struct drm_display_mode *mode;
> +	u32 bus_format = MEDIA_BUS_FMT_RGB666_1X18;
>  
>  	mode = drm_mode_duplicate(connector->dev, &default_mode);
>  	if (!mode) {
> @@ -186,6 +188,8 @@ static int st7789v_get_modes(struct drm_panel *panel,
>  
>  	connector->display_info.width_mm = 61;
>  	connector->display_info.height_mm = 103;
> +	drm_display_info_set_bus_formats(&connector->display_info,
> +					 &bus_format, 1);
>  
>  	return 1;
>  }
> -- 
> 2.34.1