[PATCH v5 01/11] i2c: Enhance i2c_new_ancillary_device API

Mon Jun 12 12:54:05 UTC 2023

Hi Biju,

On Mon, Jun 12, 2023 at 12:42:33PM +0000, Biju Das wrote:
> Hi Laurent,
> 
> Thanks for the feedback.
> 
> > Subject: Re: [PATCH v5 01/11] i2c: Enhance i2c_new_ancillary_device API
> > 
> > On Mon, Jun 12, 2023 at 09:53:02AM +0000, Biju Das wrote:
> > > Hi All,
> > >
> > > How do we proceed here between [1] and [2]?
> > >
> > > DT-Maintainers suggestion:
> > > [1]
> > > raa215300: pmic at 12 {
> > > 	compatible = "renesas,raa215300";
> > > 	reg = <0x12>, <0x6f>;
> > > 	reg-names = "main", "rtc";
> > >
> > > 	clocks = <&x2>;
> > > 	clock-names = "xin";
> > > 	/* Add Optional shared IRQ resource and share it to child and handle
> > > it both in parent and child */ };
> > >
> > > Laurent/Wolfram suggestion to split it into two nodes and get rid of this patch:
> > > [2]
> > > 	raa215300: pmic @12 {
> > > 		compatible = "renesas,raa215300";
> > > 		reg = <0x12>;
> > >
> > > 		/* Add Optional shared IRQ */
> > > 		renesas,raa215300-rtc = <&rtc_raa215300>; /* Parse the handle and Enable RTC , if present.*/
> > > 	};
> > >
> > > 	rtc_raa215300: rtc at 6f {
> > > 		compatible = "renesas,raa215300-isl1208";
> > 
> > Make this
> > 
> >  		compatible = "renesas,raa215300-isl1208", "isil,isl1208";
> > 
> > Btw, it would be nice to convert
> > Documentation/devicetree/bindings/rtc/isil,isl1208.txt to YAML.
> 
> It is already posted see [1] and [2]
> [1]
> https://patchwork.kernel.org/project/linux-renesas-soc/patch/20230602142426.438375-6-biju.das.jz@bp.renesas.com/
> 
> [2]
> https://patchwork.kernel.org/project/linux-renesas-soc/patch/20230602142426.438375-7-biju.das.jz@bp.renesas.com/

Great :-) Thanks.

> > > 		reg = <0x6f>;
> > >
> > > 		/* Add Optional shared IRQ */
> > > 		clocks = <&x2>;
> > > 		clock-names = "xin";
> > > 		renesas,raa215300-pmic = <&pmic>; /* Parse the handle to get PMIC
> > > version to check Oscillator bit is inverted or not */
> > 
> > This isn't nice. I would instead add a renesas,invert-xtoscb boolean
> > property. If you don't want different DT sources for different revisions
> > of the PMIC,
> 
> I need to support all PMIC versions with same image, as PMIC is just a component on the
> SoM module. So SoM's have different PMIC versions.

I understand it's not convenient, so let's try to find a good solution.

> > one option is to perform the auto-detection in the boot
> > loader and update the DT dynamically there.
> 
> Yes, this is an option. Bootloader updates "renesas,invert-xtoscb" property based
> on PMIC version.
> 
> Not sure, From binding perspective, Documenting "renesas,invert-xtoscb" is OK for
> the relevant maintainers??

It's fine with me at least :-) I think a property makes sense, as it
describes the device. Updating the device tree in the boot loader based
on auto-detection of features is also fairly common (to set the amount
of DRAM for instance).

What I'm not entirely sure about in this case is if a property would be
the best option, or two different compatible strings. I'll let the
appropriate maintainer recommend one of those two options. In either
case, the boot loader would be responsible for updating the DT.

> > > 	};
> > > > -----Original Message-----
> > > > From: Biju Das
> > > > Sent: Thursday, June 8, 2023 1:57 PM
> > > > To: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
> > > > Cc: Wolfram Sang <wsa at kernel.org>; Geert Uytterhoeven <geert at linux-
> > > > m68k.org>; Krzysztof Kozlowski <krzysztof.kozlowski+dt at linaro.org>;
> > > > Rob Herring <robh+dt at kernel.org>; Andrzej Hajda
> > > > <andrzej.hajda at intel.com>; Neil Armstrong
> > > > <neil.armstrong at linaro.org>; Robert Foss <rfoss at kernel.org>; David
> > > > Airlie <airlied at gmail.com>; Daniel Vetter <daniel at ffwll.ch>; Kieran
> > > > Bingham <kieran.bingham at ideasonboard.com>;
> > > > Mauro Carvalho Chehab <mchehab at kernel.org>; Hans Verkuil <hverkuil-
> > > > cisco at xs4all.nl>; Alessandro Zummo <a.zummo at towertech.it>; Alexandre
> > > > Belloni <alexandre.belloni at bootlin.com>; Jonas Karlman
> > > > <jonas at kwiboo.se>; Jernej Skrabec <jernej.skrabec at gmail.com>; Uwe
> > > > Kleine-König <u.kleine- koenig at pengutronix.de>; Corey Minyard
> > > > <cminyard at mvista.com>; Marek Behún <kabel at kernel.org>; Jiasheng
> > > > Jiang <jiasheng at iscas.ac.cn>; Antonio Borneo
> > > > <antonio.borneo at foss.st.com>; Abhinav Kumar
> > > > <quic_abhinavk at quicinc.com>; Ahmad Fatoum <a.fatoum at pengutronix.de>;
> > > > dri-devel at lists.freedesktop.org; linux-i2c at vger.kernel.org;
> > > > linux-media at vger.kernel.org; Geert Uytterhoeven
> > > > <geert+renesas at glider.be>; Fabrizio Castro
> > > > <fabrizio.castro.jz at renesas.com>; linux-renesas-soc at vger.kernel.org;
> > > > Mark Brown <broonie at kernel.org>
> > > > Subject: RE: [PATCH v5 01/11] i2c: Enhance i2c_new_ancillary_device
> > > > API
> > > >
> > > > Hi Laurent,
> > > >
> > > > Thanks for the feedback.
> > > >
> > > > > Subject: Re: [PATCH v5 01/11] i2c: Enhance
> > > > > i2c_new_ancillary_device API
> > > > >
> > > > > Hi Biju,
> > > > >
> > > > > On Thu, Jun 08, 2023 at 11:00:19AM +0000, Biju Das wrote:
> > > > > > > Subject: Re: [PATCH v5 01/11] i2c: Enhance
> > > > > > > i2c_new_ancillary_device API On Thu, Jun 08, 2023 at
> > 06:41:35AM+0000, Biju Das wrote:
> > > > > > > > > Subject: RE: [PATCH v5 01/11] i2c: Enhance
> > > > > > > > > i2c_new_ancillary_device API
> > > > > > > > > > Subject: Re: [PATCH v5 01/11] i2c: Enhance
> > > > > > > > > > i2c_new_ancillary_device API
> > > > > > > > > >
> > > > > > > > > > Hi all,
> > > > > > > > > >
> > > > > > > > > > sorry for not being able to chime in earlier.
> > > > > > > > > >
> > > > > > > > > > > In Biju's particular use case, the i2c device responds
> > > > > > > > > > > to two addresses, which is the standard i2c ancillary
> > use case.
> > > > > > > > > > > However, what's special
> > > > > > > > > >
> > > > > > > > > > Not quite. ancillary is used when a *driver* needs to
> > > > > > > > > > take care of two addresses. We already have devices
> > > > > > > > > > bundling two features into the same chip. I recall at
> > > > > > > > > > least RTC + EEPROM somewhere. And so far, we have been
> > > > > > > > > > handling this by creating two nodes in DT and have proper
> > binding docs.
> > > > > > > > > > I think this is cleaner. First, you can see in DT
> > > > > > > > > > already what the compound device really consists of. In
> > > > > > > > > > this case, which RTC and RTC driver is exactly needed.
> > > > > > > > > > Second, the code added here adds complexity to the I2C
> > > > > > > > > > core with another layer of inderection for dummy devices.
> > > > > > > > >
> > > > > > > > > FYI, please see [1] and [2]
> > > > > > > > >
> > > > > > > > > As per DT maintainers, most of PMICs are described with
> > > > > > > > > one node, even though RTC is on separate address.
> > > > > > > > > According to them the DT schema allows multiple addresses
> > for children.
> > > > > > > > > But currently we lacks implementation for that. The
> > > > > > > > > enhancement to this API allows that.
> > > > > > > > >
> > > > > > > > > > > As some resources are shared (knowledge about the
> > > > > > > > > > > clocks), splitting this in two distinct devices in DT
> > > > > > > > > > > (which is what Biju's initial patch series did) would
> > > > > > > > > > > need phandles to link both nodes together.
> > > > > > > > > > >
> > > > > > > > > > > Do you have a better idea how to represent this?
> > > > > > > > > >
> > > > > > > > > > Not sure if I understood this chip correctly, but maybe:
> > > > > > > > > > The PMIC driver exposes a clock gate which can be
> > > > > > > > > > consumed by the RTC driver?
> > > > > > > >
> > > > > > > > Let me give me some details of this PMIC chip.
> > > > > > > >
> > > > > > > > PMIC device has 2 addresses "0x12:- PMIC" , "0x6f"- rtc.
> > > > > > > >
> > > > > > > > It has XIN, XOUT, INT# pins and a register for firmware
> > revisions.
> > > > > > >
> > > > > > > Is the firmware revision register accessed through address
> > > > > > > 0x12
> > > > > > > (PMIC) or 0x6f (RTC) ?
> > > > > >
> > > > > > 0x12(PMIC).
> > > > > >
> > > > > > > > Based on the system design,
> > > > > > > >
> > > > > > > > If XIN and XOUT is connected to external crystal, Internal
> > > > > > > > oscillator is enabled for RTC. In this case we need to set
> > > > > > > > the oscillator bit to "0".
> > > > > > > >
> > > > > > > > If XIN is connected to external clock source, Internal
> > > > > > > > oscillator is disabled for RTC. In this case we need to set
> > > > > > > > the oscillator bit to "1".
> > > > > > >
> > > > > > > Same here, which address is the oscillator bit accessed through
> > ?
> > > > > >
> > > > > > RTC (0x6F)--> to set oscillator bit.
> > > > >
> > > > > And does the PMIC part depend on the oscillator bit being set
> > > > > correctly, or is that used for the RTC only ?
> > > >
> > > > PMIC part does not. It is used only in RTC.
> > > >
> > > > Based on PMIC revision, we need to set the oscillator bit in RTC
> > > > block for PMIC rev a0 and rest of the PMIC chips.
> > > >
> > > > On PMIC rev0, oscillator bit is inverted.
> > > >
> > > > > > > > If XIN and XOUT not connected RTC operation not possible.
> > > > > > > >
> > > > > > > > IRQ# (optional) functionality is shared between PMIC and RTC.
> > > > > > > > (PMIC fault for various bucks/LDOs/WDT/OTP/NVM and alarm
> > condition).
> > > > > > >
> > > > > > > IRQs can be shared between multiple devices so this shouldn't
> > > > > > > be a problem.
> > > > > >
> > > > > > OK. How do we represent this IRQ in DT?
> > > > >
> > > > > You can simply reference the same IRQ from the interrupts property
> > > > > of different DT nodes.
> > > > >
> > > > > > > > The board, I have doesn't populate IRQ# pin. If needed some
> > > > > > > > customers can populate IRQ# pin and use it for PMIC fault
> > > > > > > > and RTC alarm.
> > > > > > > >
> > > > > > > > Also, currently my board has PMIC rev a0 where oscillator
> > > > > > > > bit is inverted and internal oscillator is enabled (ie: XIN
> > > > > > > > and XOUT is connected to external crystal)
> > 
> > --
> > Regards,
> > 
> > Laurent Pinchart

-- 
Regards,

Laurent Pinchart