[PATCH] drm/msm/dp: Drop aux devices together with DP controller
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Mon Jun 12 22:40:49 UTC 2023
On 13/06/2023 01:01, Bjorn Andersson wrote:
> Using devres to depopulate the aux bus made sure that upon a probe
> deferral the EDP panel device would be destroyed and recreated upon next
> attempt.
>
> But the struct device which the devres is tied to is the DPUs
> (drm_dev->dev), which may be happen after the DP controller is torn
> down.
>
> Indications of this can be seen in the commonly seen EDID-hexdump full
> of zeros in the log, or the occasional/rare KASAN fault where the
> panel's attempt to read the EDID information causes a use after free on
> DP resources.
>
> It's tempting to move the devres to the DP controller's struct device,
> but the resources used by the device(s) on the aux bus are explicitly
> torn down in the error path.
I hoped that proper usage of of_dp_aux_populate_bus(), with the callback
function being non-NULL would have solved at least this part. But it
seems I'll never see this patch.
> The KASAN-reported use-after-free also
> remains, as the DP aux "module" explicitly frees its devres-allocated
> memory in this code path.
>
> As such, explicitly depopulate the aux bus in the error path, and in the
> component unbind path, to avoid these issues.
>
> Fixes: 2b57f726611e ("drm/msm/dp: fix aux-bus EP lifetime")
> Signed-off-by: Bjorn Andersson <quic_bjorande at quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> ---
> drivers/gpu/drm/msm/dp/dp_display.c | 14 +++-----------
> 1 file changed, 3 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
> index 3d8fa2e73583..bbb0550a022b 100644
> --- a/drivers/gpu/drm/msm/dp/dp_display.c
> +++ b/drivers/gpu/drm/msm/dp/dp_display.c
> @@ -322,6 +322,8 @@ static void dp_display_unbind(struct device *dev, struct device *master,
>
> kthread_stop(dp->ev_tsk);
>
> + of_dp_aux_depopulate_bus(dp->aux);
> +
> dp_power_client_deinit(dp->power);
> dp_unregister_audio_driver(dev, dp->audio);
> dp_aux_unregister(dp->aux);
> @@ -1521,11 +1523,6 @@ void msm_dp_debugfs_init(struct msm_dp *dp_display, struct drm_minor *minor)
> }
> }
>
> -static void of_dp_aux_depopulate_bus_void(void *data)
> -{
> - of_dp_aux_depopulate_bus(data);
> -}
> -
> static int dp_display_get_next_bridge(struct msm_dp *dp)
> {
> int rc;
> @@ -1554,12 +1551,6 @@ static int dp_display_get_next_bridge(struct msm_dp *dp)
> of_node_put(aux_bus);
> if (rc)
> goto error;
> -
> - rc = devm_add_action_or_reset(dp->drm_dev->dev,
> - of_dp_aux_depopulate_bus_void,
> - dp_priv->aux);
> - if (rc)
> - goto error;
> } else if (dp->is_edp) {
> DRM_ERROR("eDP aux_bus not found\n");
> return -ENODEV;
> @@ -1583,6 +1574,7 @@ static int dp_display_get_next_bridge(struct msm_dp *dp)
>
> error:
> if (dp->is_edp) {
> + of_dp_aux_depopulate_bus(dp_priv->aux);
> disable_irq(dp_priv->irq);
> dp_display_host_phy_exit(dp_priv);
> dp_display_host_deinit(dp_priv);
--
With best wishes
Dmitry
More information about the dri-devel
mailing list