[PATCH v4 5/8] drm/mediatek: hdmi: add v2 support

[CK Hu (胡俊光)]

An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20230613/10061584/attachment-0001.htm>
-------------- next part --------------
Hi, Guillaume:

On Mon, 2023-05-29 at 16:31 +0200, Guillaume Ranquet wrote:
>  	 
> External email : Please do not click links or open attachments until
> you have verified the sender or the content.
>  Adds hdmi and hdmi-ddc support for v2 IP.
> 
> Signed-off-by: Guillaume Ranquet <granquet at baylibre.com>
> ---

[snip]

> +
> +static void mtk_hdmi_bridge_disable(struct drm_bridge *bridge,
> +    struct drm_bridge_state *old_bridge_state)
> +{
> +struct mtk_hdmi *hdmi = hdmi_ctx_from_bridge(bridge);
> +
> +if (!hdmi->enabled)
> +return;
> +
> +mtk_hdmi_hw_send_av_mute(hdmi);
> +usleep_range(50000, 50050);
> +mtk_hdmi_hw_vid_black(hdmi, true);
> +mtk_hdmi_disable_hdcp_encrypt(hdmi);
> +usleep_range(50000, 50050);
> +
> +phy_power_off(hdmi->phy);
> +
> +hdmi->enabled = false;
> +}
> +
> +static void mtk_hdmi_bridge_post_disable(struct drm_bridge *bridge,
> + struct drm_bridge_state *old_state)
> +{
> +struct mtk_hdmi *hdmi = hdmi_ctx_from_bridge(bridge);
> +
> +if (!hdmi->powered)
> +return;
> +
> +phy_power_off(hdmi->phy);
> +
> +hdmi->powered = false;
> +}
> +
> +static void mtk_hdmi_bridge_pre_enable(struct drm_bridge *bridge,
> +       struct drm_bridge_state *old_state)
> +{
> +struct mtk_hdmi *hdmi = hdmi_ctx_from_bridge(bridge);
> +struct drm_atomic_state *state = old_state->base.state;
> +union phy_configure_opts opts = {
> +.dp = { .link_rate = hdmi->mode.clock * KILO}
> +};
> +
> +/* Retrieve the connector through the atomic state. */
> +hdmi->curr_conn = drm_atomic_get_new_connector_for_encoder(state,
> +   bridge->encoder);
> +
> +mtk_hdmi_output_set_display_mode(hdmi, &hdmi->mode);
> +/* configuring phy clock link with appropriate rate */
> +phy_configure(hdmi->phy, &opts);
> +phy_power_on(hdmi->phy);
> +hdmi->powered = true;
> +}

In mt8173 hdmi driver, only bridge_enable stage, no bridge_pre_enable
stage, why mt8195 need to separate it?

Regards,
CK

> +
> +static void mtk_hdmi_bridge_enable(struct drm_bridge *bridge,
> +   struct drm_bridge_state *old_state)
> +{
> +struct mtk_hdmi *hdmi = hdmi_ctx_from_bridge(bridge);
> +u8 buffer_spd[HDMI_INFOFRAME_SIZE(SPD)];
> +u8 buffer_avi[HDMI_INFOFRAME_SIZE(AVI)];
> +
> +phy_power_on(hdmi->phy);
> +mtk_hdmi_send_infoframe(hdmi, buffer_spd, sizeof(buffer_spd),
> +buffer_avi, sizeof(buffer_avi), &hdmi->mode);
> +mtk_hdmi_hw_spd_infoframe(hdmi, buffer_spd, sizeof(buffer_spd));
> +mtk_hdmi_hw_avi_infoframe(hdmi, buffer_avi, sizeof(buffer_avi));
> +
> +mtk_hdmi_hw_vid_black(hdmi, false);
> +
> +hdmi->enabled = true;
> +}
> +
>