[PATCH 1/7] drm/panel: sitronix-st7789v: Prevent core spi warnings
Sam Ravnborg
sam at ravnborg.org
Thu Jun 15 05:43:46 UTC 2023
On Thu, Jun 15, 2023 at 01:22:17AM +0200, Sebastian Reichel wrote:
> Hi,
>
> On Tue, Jun 13, 2023 at 08:56:30AM +0200, Miquel Raynal wrote:
> > Hi Michael,
> >
> > michael.riesch at wolfvision.net wrote on Tue, 13 Jun 2023 08:15:26 +0200:
> >
> > > Hi Miquel,
> > >
> > > On 6/9/23 16:59, Miquel Raynal wrote:
> > > > The spi core warns us about using an of_device_id table without a
> > >
> > > s/spi/SPI ?
> >
> > Actually both are accepted in the kernel, IIRC it depends whether you
> > refer to the name of the bus or the Linux subsystem. Same for picking
> > "a" vs "an" before "spi/SPI". An attempt to use a unique formatting was
> > actually canceled because both are used equivalently and I believe even
> > the spi maintainer and the spi-nor maintainer kind of disagreed on the
> > default :)
> >
> > > > spi_device_id table aside for module utilities in orter to not rely on
> > >
> > > s/in orter to/in order to ?
> >
> > Yes, sorry for this typo as well as the two others you rightly pointed
> > out in another patch. I'll fix them.
> >
> > > > OF modaliases. Just add this table using the device name without the
> > > > vendor prefix (as it is usually done).
> > > >
> > > > Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com>
> > > > ---
> > > > drivers/gpu/drm/panel/panel-sitronix-st7789v.c | 7 +++++++
> > > > 1 file changed, 7 insertions(+)
> > > >
> > > > diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7789v.c
> > > b/drivers/gpu/drm/panel/panel-sitronix-st7789v.c
> > > > index bbc4569cbcdc..c67b9adb157f 100644
> > > > --- a/drivers/gpu/drm/panel/panel-sitronix-st7789v.c
> > > > +++ b/drivers/gpu/drm/panel/panel-sitronix-st7789v.c
> > > > @@ -400,9 +400,16 @@ static const struct of_device_id
> > > st7789v_of_match[] = {
> > > > };
> > > > MODULE_DEVICE_TABLE(of, st7789v_of_match);
> > > >
> > > > +static const struct spi_device_id st7789v_ids[] = {
> > > > + { "st7789v", },
> > > > + { /* sentinel */ }
> > > > +};
> > > > +MODULE_DEVICE_TABLE(spi, st7789v_ids);
> > > > +
> > > > static struct spi_driver st7789v_driver = {
> > > > .probe = st7789v_probe,
> > > > .remove = st7789v_remove,
> > > > + .id_table = st7789v_ids,
> > > > .driver = {
> > > > .name = "st7789v",
> > > > .of_match_table = st7789v_of_match,
> > >
> > > May I point to you Sebastian Reichel's series that features a partial
> > > overlap with your work? [0]
> >
> > Woow. That driver has been untouched for years and now two
> > contributions at the same time.
>
> Three actually. Michael also submitted a series :)
>
> > Sebastian, what is the current state of your series?
>
> The DT changes got Ack'd by Rob and I have the R-B from Michael
> (minus a minor comment to make the panel struct 'static const').
> It's mainly waiting for a review from Sam.
>
> I was a bit distracted by a boot regression on the devices and
> some other projects. The boot regression got solved, so I can
> prepare a new version if that makes things easier.
>
> > Shall I base my work on top of yours? Or is it still too
> > premature and we shall instead try to merge both and contribute a new
> > version of the series bringing support for the two panels?
>
> I suppose whatever is easier for Sam to review.
Hi Sebastian.
Too much panel stuff going on, so I miss the most and I am happy to see
other people do a lot of good work here.
Can i get a pointer to lore or so, then I will try to take a look.
Sam
More information about the dri-devel
mailing list