drm/etnaviv: slow down FE idle polling
Christian Gmeiner
christian.gmeiner at gmail.com
Thu Jun 15 09:20:37 UTC 2023
Hi
Am Do., 15. Juni 2023 um 11:16 Uhr schrieb Sui Jingfeng
<suijingfeng at loongson.cn>:
>
> Hi,
>
> On 2023/6/15 17:04, Lucas Stach wrote:
> > Am Donnerstag, dem 15.06.2023 um 12:09 +0800 schrieb Sui Jingfeng:
> >> Hi,
> >>
> >> On 2023/6/7 20:59, Lucas Stach wrote:
> >>> Currently the FE is spinning way too fast when polling for new work in
> >> 'way' -> 'away'
> >>> the FE idleloop.
> >> 'idleloop' -> 'idle loop'
> >>> As each poll fetches 16 bytes from memory, a GPU running
> >>> at 1GHz with the current setting of 200 wait cycle between fetches causes
> >>> 80 MB/s of memory traffic just to check for new work when the GPU is
> >>> otherwise idle, which is more FE traffic than in some GPU loaded cases.
> >>>
> >>> Significantly increase the number of wait cycles to slow down the poll
> >>> interval to ~30µs, limiting the FE idle memory traffic to 512 KB/s, while
> >>> providing a max latency which should not hurt most use-cases. The FE WAIT
> >>> command seems to have some unknown discrete steps in the wait cycles
> >> add a comma here.
> >>> so
> >>> we may over/undershoot the target a bit, but that should be harmless.
> >> overshoot or undershoot
> >>> Signed-off-by: Lucas Stach <l.stach at pengutronix.de>
> >>> Reviewed-by: Christian Gmeiner <cgmeiner at igalia.com>
> >>> ---
> >>> drivers/gpu/drm/etnaviv/etnaviv_buffer.c | 11 ++++++-----
> >>> drivers/gpu/drm/etnaviv/etnaviv_gpu.c | 7 +++++++
> >>> drivers/gpu/drm/etnaviv/etnaviv_gpu.h | 1 +
> >>> 3 files changed, 14 insertions(+), 5 deletions(-)
> >>>
> >>> diff --git a/drivers/gpu/drm/etnaviv/etnaviv_buffer.c b/drivers/gpu/drm/etnaviv/etnaviv_buffer.c
> >>> index cf741c5c82d2..384df1659be6 100644
> >>> --- a/drivers/gpu/drm/etnaviv/etnaviv_buffer.c
> >>> +++ b/drivers/gpu/drm/etnaviv/etnaviv_buffer.c
> >>> @@ -53,11 +53,12 @@ static inline void CMD_END(struct etnaviv_cmdbuf *buffer)
> >>> OUT(buffer, VIV_FE_END_HEADER_OP_END);
> >>> }
> >>>
> >>> -static inline void CMD_WAIT(struct etnaviv_cmdbuf *buffer)
> >>> +static inline void CMD_WAIT(struct etnaviv_cmdbuf *buffer,
> >>> + unsigned int waitcycles)
> >>> {
> >>> buffer->user_size = ALIGN(buffer->user_size, 8);
> >>>
> >>> - OUT(buffer, VIV_FE_WAIT_HEADER_OP_WAIT | 200);
> >>> + OUT(buffer, VIV_FE_WAIT_HEADER_OP_WAIT | waitcycles);
> >>> }
> >>>
> >>> static inline void CMD_LINK(struct etnaviv_cmdbuf *buffer,
> >>> @@ -168,7 +169,7 @@ u16 etnaviv_buffer_init(struct etnaviv_gpu *gpu)
> >>> /* initialize buffer */
> >>> buffer->user_size = 0;
> >>>
> >>> - CMD_WAIT(buffer);
> >>> + CMD_WAIT(buffer, gpu->fe_waitcycles);
> >>> CMD_LINK(buffer, 2,
> >>> etnaviv_cmdbuf_get_va(buffer, &gpu->mmu_context->cmdbuf_mapping)
> >>> + buffer->user_size - 4);
> >>> @@ -320,7 +321,7 @@ void etnaviv_sync_point_queue(struct etnaviv_gpu *gpu, unsigned int event)
> >>> CMD_END(buffer);
> >>>
> >>> /* Append waitlink */
> >>> - CMD_WAIT(buffer);
> >>> + CMD_WAIT(buffer, gpu->fe_waitcycles);
> >>> CMD_LINK(buffer, 2,
> >>> etnaviv_cmdbuf_get_va(buffer, &gpu->mmu_context->cmdbuf_mapping)
> >>> + buffer->user_size - 4);
> >>> @@ -503,7 +504,7 @@ void etnaviv_buffer_queue(struct etnaviv_gpu *gpu, u32 exec_state,
> >>>
> >>> CMD_LOAD_STATE(buffer, VIVS_GL_EVENT, VIVS_GL_EVENT_EVENT_ID(event) |
> >>> VIVS_GL_EVENT_FROM_PE);
> >>> - CMD_WAIT(buffer);
> >>> + CMD_WAIT(buffer, gpu->fe_waitcycles);
> >>> CMD_LINK(buffer, 2,
> >>> etnaviv_cmdbuf_get_va(buffer, &gpu->mmu_context->cmdbuf_mapping)
> >>> + buffer->user_size - 4);
> >>> diff --git a/drivers/gpu/drm/etnaviv/etnaviv_gpu.c b/drivers/gpu/drm/etnaviv/etnaviv_gpu.c
> >>> index 41aab1aa330b..8c20dff32240 100644
> >>> --- a/drivers/gpu/drm/etnaviv/etnaviv_gpu.c
> >>> +++ b/drivers/gpu/drm/etnaviv/etnaviv_gpu.c
> >>> @@ -493,6 +493,13 @@ static void etnaviv_gpu_update_clock(struct etnaviv_gpu *gpu)
> >>> clock |= VIVS_HI_CLOCK_CONTROL_FSCALE_VAL(fscale);
> >>> etnaviv_gpu_load_clock(gpu, clock);
> >>> }
> >>> +
> >>> + /*
> >>> + * Choose number of wait cycles to target a ~30us (1/32768) max latency
> >>> + * until new work is picked up by the FE when it polls in the idle loop.
> >>> + */
> >>> + gpu->fe_waitcycles = min(gpu->base_rate_core >> (15 - gpu->freq_scale),
> >>> + 0xffffUL);
> >> This patch is NOT effective on our hardware GC1000 v5037 (ls7a1000 +
> >> ls3a5000).
> >>
> >> As the gpu->base_rate_core is 0, so, in the end gpu->fe_waitcycles is
> >> also zero.
> >>
> > Uh, that's a problem, as the patch will then have the opposite effect
> > on your platform by speeding up the idle loop. Thanks for catching
> > this! I'll improve the patch to keep a reasonable amount of wait cycles
> > in this case.
>
> It's OK, no big problem as far as I can see. (it my platform's problem,
> not your problem)
>
It will become a problem as it eats up the bandwidth that you want to
spend for real graphic work.
>
> Merge it is also OK, if we found something wrong we could fix it with a
> another patch.
>
Hmm.. I think that the fix for this problem is more or less an extra
if so I would love to see a proper fix
before this patch gets merged.
> > Regards,
> > Lucas
> >
> >> But after apply this path, the glmark2 still run happily, no influence. So
> >>
> >>
> >> Tested-by: Sui Jingfeng <suijingfeng at loongson.cn>
> >>
> >>> }
> >>>
> >>> static int etnaviv_hw_reset(struct etnaviv_gpu *gpu)
> >>> diff --git a/drivers/gpu/drm/etnaviv/etnaviv_gpu.h b/drivers/gpu/drm/etnaviv/etnaviv_gpu.h
> >>> index 98c6f9c320fc..e1e1de59c38d 100644
> >>> --- a/drivers/gpu/drm/etnaviv/etnaviv_gpu.h
> >>> +++ b/drivers/gpu/drm/etnaviv/etnaviv_gpu.h
> >>> @@ -150,6 +150,7 @@ struct etnaviv_gpu {
> >>> struct clk *clk_shader;
> >>>
> >>> unsigned int freq_scale;
> >>> + unsigned int fe_waitcycles;
> >>> unsigned long base_rate_core;
> >>> unsigned long base_rate_shader;
> >>> };
>
> --
> Jingfeng
>
--
greets
--
Christian Gmeiner, MSc
https://christian-gmeiner.info/privacypolicy
More information about the dri-devel
mailing list