[PATCH v9 00/20] GMU-less A6xx support (A610, A619_holi)
Konrad Dybcio
konrad.dybcio at linaro.org
Thu Jun 15 23:20:41 UTC 2023
v8 -> v9:
- Re-pick-up Krzysztof's lost r-b tag (I messed up, sorry)
- Rebase on constifying-adreno_is_aXYZ and A690 changes
- Fix A610 inactive period
- Move the stray A619 register write from A610 patch to the A619 patch
- Add one more commit, cleaning up A690 addition for git context (for adding
adreno_is_a680 in "Use adreno_is_aXYZ macros in speedbin matching")
- Use a readback+delay combo instead of a memory barrier in sw reset
- Separate out GMU CX power counter moving
- Pick up tags from v8
v8: https://lore.kernel.org/r/20230223-topic-gmuwrapper-v8-0-69c68206609e@linaro.org
v7 -> v8:
- Fix up resume/suspend (icc now correctly parks to 0, don't abuse
OPP & genpd throughout system-wide suspend)
- Don't handle ebi1_clk separately, the bulk ops handle it just fine
- Rebase on next-20230525 (no meaningful changes)
v7: https://lore.kernel.org/linux-arm-msm/20230223-topic-gmuwrapper-v7-0-ecc7aab83556@linaro.org/
v6 -> v7:
- Rebase on next-20230519 (A640/650 speedbin merged already)
- separate out the .get_timestamp cb for gmu wrapper
- check for gmu presence inside a6xx_llc_slices_(init|destroy) instead
of before calling them
- use REG_A6XX_RBBM_GPR0_CNTL instead of literal 0x18
- move a6xx_bus_clear_pending_transactions to a6xx_gpu, clean it up
and reuse it for gmu wrapper gpus
- drop clearing RBBM_GBIF (GBIF from GX's POV) as part of draining the
buses, it's not necessary
- introduce a helper for gpu softreset
- sw-reset the gmu wrapper GPUS *after* draining GBIF and only reset
it if it's hung
- reword the commit message in "Remove both GBIF and RBBM GBIF halt
on hw init" and move it before gmu wrapper-specific changes
- drop set_rate logic from a6xx_pm_suspend as the clock simply gets
disabled and we don't have to worry about scaling problems as OPP
and devfreq take care of that, validated with debugcc
- drop a level of indentation in _a6xx_check_idle() to hopefully
improve readability
- check for !a610 instead of gmu_wrapper||a619_holi in sptprac cc
toggling in a6xx_set_hwcg()
- pick up krzk's rb on bindings
All external dependencies have been merged since the last revision.
v6: https://lore.kernel.org/r/20230223-topic-gmuwrapper-v6-0-2034115bb60c@linaro.org
v5 -> v6:
- Rebase on 8ead96783163 ("drm/msm/gpu: Move BO allocation out of hw_init")
(Add .ucode_load to funcs_gmuwrapper)
- Drop A6[45]0 speedbin deps, merged into msm-next
Dependencies:
- https://lore.kernel.org/linux-arm-msm/20230330231517.2747024-1-konrad.dybcio@linaro.org/ (to work properly)
v5: https://lore.kernel.org/linux-arm-msm/20230223-topic-gmuwrapper-v5-0-bf774b9a902a@linaro.org/
v4 -> v5:
- Add a newline before the new allOf:if: [3/15]
- Enforce 6 clocks on A619_holi/A610 [2/15]
- Pick up tags
- Improve error handling in a6xx_pm_resume [6/15]
- Add patch [1/15] (fix an existing issue) which can be picked
separately and account for it in [6/15]
- Rebase atop Akhil's CX shutdown patches and incorporate analogous logic
- Fix a regression introduced in v3 that made the fw loader expect
GMU fw on GMU wrapper GPUs
Dependencies:
- https://lore.kernel.org/linux-arm-msm/20230120172233.1905761-1-konrad.dybcio@linaro.org/ (to apply)
- https://lore.kernel.org/linux-arm-msm/20230330231517.2747024-1-konrad.dybcio@linaro.org/ (to work properly)
v4: https://lore.kernel.org/r/20230223-topic-gmuwrapper-v4-0-e987eb79d03f@linaro.org
v3 -> v4:
- Drop the mistakengly-included and wrong A3xx-A5xx bindings changes
- Improve bindings commit messages to better explain what GMU Wrapper is
- Drop the A680 highest bank bit value adjustment patch
- Sort UBWC config variables in a reverse-Christmass-tree fashion [4/14]
- Don't alter any UBWC config values in [4/14]
- Do so for a619_holi in [8/14]
- Rebase on next-20230314 (shouldn't matter at all)
v3: https://lore.kernel.org/r/20230223-topic-gmuwrapper-v3-0-5be55a336819@linaro.org
v2 -> v3:
New dependencies:
- https://lore.kernel.org/linux-arm-msm/20230223-topic-opp-v3-0-5f22163cd1df@linaro.org/T/#t
- https://lore.kernel.org/linux-arm-msm/20230120172233.1905761-1-konrad.dybcio@linaro.org/
Sidenote: A speedbin rework is in progress, the of_machine_is_compatible
calls in A619_holi are ugly (but well, necessary..) but they'll be
replaced with socid matching in this or the next kernel cycle.
Due to the new way of identifying GMU wrapper GPUs, configuring 6350
to use wrapper would cause the wrong fuse values to be checked, but that
will be solved by the conversion + the ultimate goal is to use the GMU
whenever possible with the wrapper left for GMU-less Adrenos and early
bringup debugging of GMU-equipped ones.
- Ship dt-bindings in this series as we're referencing the compatible now
- "De-staticize" -> "remove static keyword" [3/15]
- Track down all the values in [4/15]
- Add many comments and explanations in [4/15]
- Fix possible return-before-mutex-unlock [5/15]
- Explain the GMU wrapper a bit more in the commit msg [5/15]
- Separate out pm_resume/suspend for GMU-wrapper GPUs to make things
cleaner [5/15]
- Don't check if `info` exists, it has to at this point [5/15]
- Assign gpu->info early and clean up following if statements in
a6xx_gpu_init [5/15]
- Determine whether we use GMU wrapper based on the GMU compatible
instead of a quirk [5/15]
- Use a struct field to annotate whether we're using gmu wrapper so
that it can be assigned at runtime (turns out a619 holi-ness cannot
be determined by patchid + that will make it easier to test out GMU
GPUs without actually turning on the GMU if anybody wants to do so)
[5/15]
- Unconditionally hook up gx to the gmu wrapper (otherwise our gpu
will not get power) [5/15]
- Don't check for gx domain presence in gmu_wrapper paths, it's
guaranteed [5/15]
- Use opp set rate in the gmuwrapper suspend path [5/15]
- Call opp functions on the GPU device and not on the DRM device of
mdp4/5/DPU1 half the time (WHOOOOPS!) [5/15]
- Disable the memory clock in a6xx_pm_suspend instead of enabling it
(moderate oops) [5/15]
- Call the forgotten clk_bulk_disable_unprepare in a6xx_pm_suspend [5/15]
- Set rate to FMIN (a6xx really doesn't like rate=0 + that's what
msm-5.x does anyway) before disabling core clock [5/15]
- pm_runtime_get_sync -> pm_runtime_resume_and_get [5/15]
- Don't annotate no cached BO support with a quirk, as A619_holi is
merged into the A619 entry in the big const struct - this means
that all GPUs operating in gmu wrapper configuration will be
implicitly treated as if they didn't have this feature [7/15]
- Drop OPP rate & icc related patches, they're a part of a separate
series now; rebase on it
- Clean up extra parentheses [8/15]
- Identify A619_holi by checking the compatible of its GMU instead
of patchlevel [8/15]
- Drop "Fix up A6XX protected registers" - unnecessary, Rob will add
a comment explaining why
- Fix existing UBWC values for A680, new patch [10/15]
- Use adreno_is_aXYZ macros in speedbin matching [13/15] - new patch
v2: https://lore.kernel.org/linux-arm-msm/20230214173145.2482651-1-konrad.dybcio@linaro.org/
v1 -> v2:
- Fix A630 values in [2/14]
- Fix [6/14] for GMU-equipped GPUs
Link to v1: https://lore.kernel.org/linux-arm-msm/20230126151618.225127-1-konrad.dybcio@linaro.org/
This series concludes my couple-weeks-long suffering of figuring out
the ins and outs of the "non-standard" A6xx GPUs which feature no GMU.
The GMU functionality is essentially emulated by parting out a
"GMU wrapper" region, which is essentially just a register space
within the GPU. It's modeled to be as similar to the actual GMU
as possible while staying as unnecessary as we can make it - there's
no IRQs, communicating with a microcontroller, no RPMh communication
etc. etc. I tried to reuse as much code as possible without making
a mess where every even line is used for GMU and every odd line is
used for GMU wrapper..
This series contains:
- plumbing for non-GMU operation, if-ing out GMU calls based on
GMU presence
- GMU wrapper support
- A610 support (w/ speedbin)
- A619 support (w/ speedbin)
- couple of minor fixes and improvements
- VDDCX/VDDGX scaling fix for non-GMU GPUs (concerns more than just
A6xx)
- Enablement of opp interconnect properties
A619_holi works perfectly fine using the already-present A619 support
in mesa. A610 needs more work on that front, but can already replay
command traces captures on downstream.
NOTE: the "drm/msm/a6xx: Add support for A619_holi" patch contains
two occurences of 0x18 used in place of a register #define, as it's
supposed to be RBBM_GPR0_CNTL, but that will only be present after
mesa-side changes are merged and headers are synced from there.
Speedbin patches depend on:
https://lore.kernel.org/linux-arm-msm/20230120172233.1905761-1-konrad.dybcio@linaro.org/
Signed-off-by: Konrad Dybcio <konrad.dybcio at linaro.org>
---
Konrad Dybcio (20):
dt-bindings: display/msm: gpu: Document GMU wrapper-equipped A6xx
dt-bindings: display/msm/gmu: Add GMU wrapper
drm/msm/adreno: Use adreno_is_revn for A690
drm/msm/a6xx: Remove static keyword from sptprac en/disable functions
drm/msm/a6xx: Move force keepalive vote removal to a6xx_gmu_force_off()
drm/msm/a6xx: Move a6xx_bus_clear_pending_transactions to a6xx_gpu
drm/msm/a6xx: Improve a6xx_bus_clear_pending_transactions()
drm/msm/a6xx: Add a helper for software-resetting the GPU
drm/msm/a6xx: Remove both GBIF and RBBM GBIF halt on hw init
drm/msm/a6xx: Extend and explain UBWC config
drm/msm/a6xx: Move CX GMU power counter enablement to hw_init
drm/msm/a6xx: Introduce GMU wrapper support
drm/msm/adreno: Disable has_cached_coherent in GMU wrapper configurations
drm/msm/a6xx: Add support for A619_holi
drm/msm/a6xx: Add A610 support
drm/msm/a6xx: Fix some A619 tunables
drm/msm/a6xx: Use "else if" in GPU speedbin rev matching
drm/msm/a6xx: Use adreno_is_aXYZ macros in speedbin matching
drm/msm/a6xx: Add A619_holi speedbin support
drm/msm/a6xx: Add A610 speedbin support
.../devicetree/bindings/display/msm/gmu.yaml | 50 +-
.../devicetree/bindings/display/msm/gpu.yaml | 61 ++-
drivers/gpu/drm/msm/adreno/a6xx_gmu.c | 128 ++++--
drivers/gpu/drm/msm/adreno/a6xx_gmu.h | 2 +
drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 512 ++++++++++++++++++---
drivers/gpu/drm/msm/adreno/a6xx_gpu.h | 4 +
drivers/gpu/drm/msm/adreno/a6xx_gpu_state.c | 14 +-
drivers/gpu/drm/msm/adreno/adreno_device.c | 17 +-
drivers/gpu/drm/msm/adreno/adreno_gpu.c | 8 +-
drivers/gpu/drm/msm/adreno/adreno_gpu.h | 36 +-
10 files changed, 685 insertions(+), 147 deletions(-)
---
base-commit: 925294c9aa184801cc0a451b69a18dd0fe7d847d
change-id: 20230223-topic-gmuwrapper-b4fff5fd7789
Best regards,
--
Konrad Dybcio <konrad.dybcio at linaro.org>
More information about the dri-devel
mailing list