[PATCH 2/2] drm/panel: simple: Add support for Mitsubishi AA084XE01
Sam Ravnborg
sam at ravnborg.org
Sun Jun 18 17:28:54 UTC 2023
Hi Miquel,
On Fri, Jun 16, 2023 at 06:45:24PM +0200, Miquel Raynal wrote:
> From: Thomas Weber <thomas.weber at corscience.de>
>
> Add support for the Mitsubishi AA084XE01 panel which is an 8.4 inch XGA
> TFT-LCD module for industrial use.
>
> Link: https://www.mouser.fr/datasheet/2/274/aa084xe01_e-364171.pdf
> Signed-off-by: Thomas Weber <thomas.weber at corscience.de>
> Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com>
> ---
> drivers/gpu/drm/panel/panel-simple.c | 27 +++++++++++++++++++++++++++
> 1 file changed, 27 insertions(+)
>
> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> index 8a3b685c2fcc..f79c9f9124a0 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -2670,6 +2670,30 @@ static const struct panel_desc mitsubishi_aa070mc01 = {
> .bus_flags = DRM_BUS_FLAG_DE_HIGH,
> };
>
> +static const struct drm_display_mode mitsubishi_aa084xe01_mode = {
> + .clock = 80000,
> + .hdisplay = 1024,
> + .hsync_start = 1024 + 24,
> + .hsync_end = 1024 + 24 + 63,
> + .htotal = 1024 + 24 + 63 + 1,
> + .vdisplay = 768,
> + .vsync_start = 768 + 3,
> + .vsync_end = 768 + 3 + 6,
> + .vtotal = 768 + 3 + 6 + 1,
> + .flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC,
> +};
> +
> +static const struct panel_desc mitsubishi_aa084xe01 = {
> + .modes = &mitsubishi_aa084xe01_mode,
> + .num_modes = 1,
> + .bpc = 8,
> + .size = {
> + .width = 1024,
> + .height = 768,
> + },
> + .bus_format = MEDIA_BUS_FMT_RGB565_1X16,
> +};
The .connector_type must be set.
Also consider if .bus_flags needs to be specified.
Sam
More information about the dri-devel
mailing list